(585) 405-4375
contact@echotonemusic.net
Professional Wireless Microphones and Dynamic Mics
System 20 PRO 4-channel receiver.
Features
Half-rack chassis capable of receiving up to four transmitters
Each receiver channel can be paired with up to four transmitters, allowing users to instantly switch between different transmitter configurations
Switch between Standard (10 channels) and HD (20 channels) modes
Receiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for added versatility
Up to five chassis can be linked and used simultaneously
Monitor transmitter status, audio level, remaining battery time, and other information in A-T Wireless Manager
Auto-lock function prevents unintended operations
Specifications
Overall System
Operating Frequencies 2,402 to 2,480 MHz
Dynamic Range 120 dB (A-weighted), typical
Total Harmonic Distortion < 0.05%, typical
Maximum Simultaneous Use (recommended) Standard: 10 channels
HD mode: 20 channels
It depends on the region and environment.
System Frequency Response 20 to 20,000 Hz
Varies depending on the microphone to be installed.
System 20 PRO body-pack transmitter.
Features
Two antennas built into the transmitter
High sound quality (24-bit/48 kHz)
Compatible with NiMH batteries for all-day use
Slide-to-mute switch
Water- and sweat-resistant cW-style locking 4-pin connector for use with a variety of Audio-Technica microphones
OLED display
Specifications
Overall System
Operating Frequencies 2,402 to 2,480 MHz
Dynamic Range 120 dB (A-weighted), typical
Total Harmonic Distortion < 0.05%, typical
Maximum Simultaneous Use (recommended) Standard: 10 channels
HD mode: 20 channels
It depends on the region and environment.
System Frequency Response 20 to 20,000 Hz
Varies depending on the microphone to be installed.
System 20 Digital Wireless System includes ATW-R1440 4-channel receiver and two ATW-T1402 handheld microphone transmitters.
Features
Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
Plug-and-play operation in the 2.4 GHz range – completely free from TV interference
User can switch between Standard mode (10 channels) and HD mode (20 channels) to minimize latency or maximize channel count, respectively
Receiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for added versatility
Up to five chassis can be linked and used simultaneously
Each receiver channel can be paired with up to four transmitters, allowing users to instantly switch between different transmitter configurations
Chassis’ System ID Display shows RF signal level, system ID, transmitter battery level, and system link status
Each half-rack receiver chassis comes with a short and a long rack ear, and two long ears can be combined as a joining plate to secure two chassis in a full rack space
Compatible with Audio-Technica’s Wireless Manager software for centralized management of system settings and operations
Auto-lock function prevents unintended operations like turning off the power or displaying the channel select screen
AES128 encryption for security
Compatible with Syslog protocol
Ability to configure, monitor, and save device settings as projects in Wireless Manager
Transmitters and receivers include OLED screens for optimal readout of key settings and alerts
Water- and sweat-resistant cW-style connector on body-pack transmitter provides secure connection to lavalier mics, headworn mics, and cables with cW-style locking 4-pin connector
Charging terminals on body-pack and handheld transmitters work with ATW-CHG3/ATW-CHG3a and ATW-CHG3N/ATW-CHG3Na charging docks to recharge NiMH batteries
Supports mixed output for situations with limited input channels
Specifications
Overall System
Operating Frequencies 2,402 to 2,480 MHz
Dynamic Range 120 dB (A-weighted), typical
Total Harmonic Distortion < 0.05%, typical
Maximum Simultaneous Use (recommended) Standard: 10 channels
HD mode: 20 channels
It depends on the region and environment.
System Frequency Response 20 to 20,000 Hz
Varies depending on the microphone to be installed.
System 20 Digital Wireless System includes ATW-R1440 4-channel receiver, ATW-T1402 handheld microphone transmitter, and ATW-T1401 body-pack transmitter.
Select a microphone or cable with a cW-style locking 4-pin connector to complete the system.
Features
Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
Plug-and-play operation in the 2.4 GHz range – completely free from TV interference
User can switch between Standard mode (10 channels) and HD mode (20 channels) to minimize latency or maximize channel count, respectively
Receiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for added versatility
Up to five chassis can be linked and used simultaneously
Each receiver channel can be paired with up to four transmitters, allowing users to instantly switch between different transmitter configurations
Chassis’ System ID Display shows RF signal level, system ID, transmitter battery level, and system link status
Each half-rack receiver chassis comes with a short and a long rack ear, and two long ears can be combined as a joining plate to secure two chassis in a full rack space
Compatible with Audio-Technica’s Wireless Manager software for centralized management of system settings and operations
Auto-lock function prevents unintended operations like turning off the power or displaying the channel select screen
AES128 encryption for security
Compatible with Syslog protocol
Ability to configure, monitor, and save device settings as projects in Wireless Manager
Transmitters and receivers include OLED screens for optimal readout of key settings and alerts
Water- and sweat-resistant cW-style connector on body-pack transmitter provides secure connection to lavalier mics, headworn mics, and cables with cW-style locking 4-pin connector
Charging terminals on body-pack and handheld transmitters work with ATW-CHG3/ATW-CHG3a and ATW-CHG3N/ATW-CHG3Na charging docks to recharge NiMH batteries
Supports mixed output for situations with limited input channels
Specifications
Overall System
Operating Frequencies 2,402 to 2,480 MHz
Dynamic Range 120 dB (A-weighted), typical
Total Harmonic Distortion < 0.05%, typical
Maximum Simultaneous Use (recommended) Standard: 10 channels
HD mode: 20 channels
It depends on the region and environment.
System Frequency Response 20 to 20,000 Hz
Varies depending on the microphone to be installed.
System 20 Digital Wireless System includes ATW-R1440 4-channel receiver and two ATW-T1401 body-pack transmitters.
Select microphones and/or cables with a cW-style locking 4-pin connector to complete the system.
Features
Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
Plug-and-play operation in the 2.4 GHz range – completely free from TV interference
User can switch between Standard mode (10 channels) and HD mode (20 channels) to minimize latency or maximize channel count, respectively
Receiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for added versatility
Up to five chassis can be linked and used simultaneously
Each receiver channel can be paired with up to four transmitters, allowing users to instantly switch between different transmitter configurations
Chassis’ System ID Display shows RF signal level, system ID, transmitter battery level, and system link status
Each half-rack receiver chassis comes with a short and a long rack ear, and two long ears can be combined as a joining plate to secure two chassis in a full rack space
Compatible with Audio-Technica’s Wireless Manager software for centralized management of system settings and operations
Auto-lock function prevents unintended operations like turning off the power or displaying the channel select screen
AES128 encryption for security
Compatible with Syslog protocol
Ability to configure, monitor, and save device settings as projects in Wireless Manager
Transmitters and receivers include OLED screens for optimal readout of key settings and alerts
Water- and sweat-resistant cW-style connector on body-pack transmitter provides secure connection to lavalier mics, headworn mics, and cables with cW-style locking 4-pin connector
Charging terminals on body-pack and handheld transmitters work with ATW-CHG3/ATW-CHG3a and ATW-CHG3N/ATW-CHG3Na charging docks to recharge NiMH batteries
Supports mixed output for situations with limited input channels
Specifications
Overall System
Operating Frequencies 2,402 to 2,480 MHz
Dynamic Range 120 dB (A-weighted), typical
Total Harmonic Distortion < 0.05%, typical
Maximum Simultaneous Use (recommended) Standard: 10 channels
HD mode: 20 channels
It depends on the region and environment.
System Frequency Response 20 to 20,000 Hz
Varies depending on the microphone to be installed.
System includes one ATW-R1440 4-channel receiver and two ATW-T1407 desk stand transmitters.
Features
Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
Plug-and-play operation in the 2.4 GHz range – completely free from TV interference
User can switch between Standard mode (10 channels) and HD mode (20 channels) to minimize latency or maximize channel count, respectively
Receiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for added versatility
Up to five chassis can be linked and used simultaneously
Each receiver channel can be paired with up to four transmitters, allowing users to instantly switch between different transmitter configurations
Chassis’ System ID Display shows RF signal level, system ID, transmitter battery level, and system link status
Each half-rack receiver chassis comes with a short and a long rack ear, and two long ears can be combined as a joining plate to secure two chassis in a full rack space
Compatible with Audio-Technica’s Wireless Manager software for centralized management of system settings and operations
Auto-lock function prevents unintended operations like turning off the power or displaying the channel select screen
AES128 encryption for security
Compatible with Syslog protocol
Ability to configure, monitor, and save device settings as projects in Wireless Manager
Transmitters and receivers include OLED screens for optimal readout of key settings and alerts
Water- and sweat-resistant cW-style connector on body-pack transmitter provides secure connection to lavalier mics, headworn mics, and cables with cW-style locking 4-pin connector
Charging terminals on body-pack and handheld transmitters work with ATW-CHG3/ATW-CHG3a and ATW-CHG3N/ATW-CHG3Na charging docks to recharge NiMH batteries
Supports mixed output for situations with limited input channels
Specifications
Overall System
Operating Frequencies 2,402 to 2,480 MHz
Dynamic Range 120 dB (A-weighted), typical
Total Harmonic Distortion < 0.05%, typical
Maximum Simultaneous Use (recommended) Standard: 10 channels
HD mode: 20 channels
It depends on the region and environment.
System Frequency Response 20 to 20,000 Hz
Varies depending on the microphone to be installed.
Audio-Technica ATM350PL Cardioid Condenser Instrument Microphone Mounting System
Ships Free!
Designed for use with pianos, the ATM350PL UniMount® mounting system gives you the tools to perform with confidence. The system features the ATM350a cardioid condenser microphone, a high-SPL mic that provides a clear, well-balanced response from any instrument.
When teamed with the included AT8491P magnetic piano mount and strong, flexible AT8490L 9" gooseneck, the mic can be securely fastened to any metal portion of the piano and positioned to stay where you want it. The microphone’s cardioid polar pattern isolates the instrument by reducing side and rear pickup, and the switchable 80 Hz high-pass filter on the in-line power module helps control undesired low-frequency noise. The system also includes an AT8468 violin mount with hook-and-loop fastener and a protective carrying case.
Specifications:
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 40 – 20,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: –49 dB (3.5 mV) re 1V at 1 Pa
Maximum Input Sound Level: 159 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 130 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 65 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11– 52V DC, 3.5 mA typical
Switches: Flat, roll-off
Weight (Microphone): 14.5 g (0.5 oz)
Weight (Power Module): 90 g (3.2 oz)
Weight Microphone:
14.5 g (0.5 oz)
Power Module:
90 g (3.2 oz)
Cable: 4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable with HIROSE HR10-type connector
Dimensions: Microphone:
37.8 mm (1.49'') long,
12.2 mm (0.48'') maximum body diameter
Power Module:
92 mm (3.62") long,
18.9 mm (0.74") diameter
Dimensions (Power Module): 92 mm (3.62") long,
18.9 mm (0.74") diameter
Dimensions (Microphone): 37.8 mm (1.49'') long,
12.2 mm (0.48'') maximum body diameter
Output Connector (Power Module): Integral 3-pin XLRM-type
Output Connector Power Module:
Integral 3-pin XLRM-type
Optional Interchangeable Elements: UE-H hypercardioid (100°);
UE-O omnidirectional (360°)
Accessories Included: ATM350a cardioid condenser microphone; AT8543 power module; AT8491P UniMount® magnetic piano mount; AT8490L UniMount® 9" gooseneck; AT8468 violin mount (hook-and-loop fastener); protective carrying case
Audio-Technica Case Style: M36
Features
Low-profile mic design for minimum visibility
Crisp, clear, well-balanced microphone response, even at high SPLs
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
UniMount® magnetic piano mount attaches securely to the frame or other metal part of the piano, and provides excellent shock resistance for the microphone
Rugged UniMount® 9" gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play
In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise
Interchangeable elements available for hypercardioid and omnidirectional polar patterns
Included violin mount with hook-and-loop fastener provides an additional mounting option
**note- due to high demand and as venues reopen worldwide in the aftermath of state restrictions , this unit may take 2-4 weeks to build prior to shipment. it also may be in stock. We thank you for your patience.
----------------------------------------------------------------------------------------------------------------
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Items are well packed and shipped USPS, UPS or Freight Service. Items purchased on Friday may not ship until Monday or until the projected processing period. We are working hard to get your unit Built ( if needed), processed and shipped. Processing Times do vary
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.
Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches, scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees & accessories or your return may be subject to a return handling charge.
Refunds are for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service/restocking fee. This item is now used and it would be unfair to resell to another customer as new.
The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, strings, computers, vacuum tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes & polishing cloths, software/sound ware, books, CDs, DVD's, vinyl records, and videos.
Audio-Technica BP40 Large Diaphragm Dynamic Broadcast Condenser Microphone
Ships Free!
The BP40 broadcast vocal microphone offers a rich, natural, condenser-like sound from a large-diaphragm dynamic design. The large diaphragm features patented floating-edge construction that maximizes diaphragm surface area and optimizes overall diaphragm performance, while the humbucking voice coil prevents electromagnetic interference (EMI).
With rugged construction and stylish, waveform-inspired design, the BP40 delivers clear and articulate reproduction, ideal for any broadcast application. Optimized capsule placement helps maintain a commanding vocal presence even at a distance, while the multistage windscreen provides superior internal pop filtering. The BP40 broadcast microphone also includes a switchable 100 Hz high-pass filter to provide even more pop protection.
Specifications
Element: Dynamic
Polar Pattern: Hypercardioid
Frequency Response: 50-16,000 Hz
Low Frequency Roll Off: 100 Hz, 6 dB/octave
Open Circuit Sensitivity: –48 dB (3.9 mV) re 1V at 1 Pa
Switches: Flat, roll-off
Weight: 632 g (22.3 oz)
Dimensions: 164.0 mm (6.45") long, 56.0 mm (2.20") diameter
Output Connector: Integral 3-pin XLRM-type
Accessories Included: AT8483 mounting clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
OPTIONAL ACCESSORY: AT8484 shock mount for 5/8"-27 threaded stands
Audio-Technica: Case Style R12
Features:
Rich, natural, condenser-like sound
Large diameter diaphragm with patented floating-edge construction for optimal diaphragm performance
Humbucking coil prevents electromagnetic interference (EMI)
Hypercardioid polar pattern improves isolation
Switchable 100 Hz high-pass filter
Superior off-axis rejection for maximum gain before feedback
Optimized capsule placement for commanding vocal presence even at a distance
Multistage windscreen provides superior internal pop filtering
Rugged, all-metal construction for dependable use in professional broadcast environments
----------------------------------------------------------------------------------------------------------------
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Items are well packed and shipped USPS, UPS or Freight Service. Items purchased on Friday may not ship until Monday or until the projected processing period. We are working hard to get your unit Built ( if needed), processed and shipped. Processing Times do vary
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.
Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches, scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees & accessories or your return may be subject to a return handling charge.
Refunds are for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service/restocking fee. This item is now used and it would be unfair to resell to another customer as new.
The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, strings, computers, vacuum tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes & polishing cloths, software/sound ware, books, CDs, DVD's, vinyl records, and videos.
Audio-Technica ATW-3212/C510EE1 3000 Series Wireless Handheld Microphone System
ATW-R3210 receiver and ATW-T3202 handheld transmitter with ATW-C510 cardioid dynamic microphone capsule.
Specifications:
Operating Frequencies: Band DE2: 470.125 to 529.975 MHz (2395 frequencies)
Band EE1: 530.000 to 589.975 MHz (2400 frequencies)
Band EF1: 590.000 to 649.975 MHz (2400 frequencies)
Band FG1: 650.000 to 699.875 MHz (1996 frequencies)
Operating Frequencies: Band DE2: 470.125 to 529.975 MHz (2395 frequencies)
Band EE1: 530.000 to 589.975 MHz (2400 frequencies)
Band EF1: 590.000 to 649.975 MHz (2400 frequencies)
Band FG1: 650.000 to 699.875 MHz (1996 frequencies)
Please note that some frequency bands might not be available in your territory or could come with a limited tuning bandwidth / transmitting power due to local regulations.
Minimum Frequency Step: 25 kHz
Modulation Mode: FM
Maximum Deviation: ATW-T3201: ±38 kHz (THD:10%)
ATW-T3202: ±36 kHz (THD:10%)
Frequency Response: ATW-T3201: 31 Hz to 15,500 Hz
ATW-T3202: 25 Hz to 16,700 Hz
Frequency response depends on attached microphone element
Operating Range: 100 m (328')
Open range environment with no interfering signals.
Total Harmonic Distortion: <1.0% (at 1 kHz, ±17.5 kHz deviation)
Operating Temperature Range: -5° C to +45° C (23° F to 113° F)
Simultaneous Use: 40 Channels per band*
For assistance with multi-band operation or other frequency coordination issues, please contact your regional Audio-Technica customer service representitive. *Region and band dependent
Handheld Transmitter
RF Power Output: High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Spurious Emissions: Following Federal and National Regulations
Microphone Capsule; Interchangable industry standard thread
Battery Type: Two 1.5V AA, not included
Battery Life: High: 8.0 hours (alkaline), Low: 9.0 hours (alkaline)
High: 9.0 hours (Ni-MH 1900mAh), Low: 9.5 hours (Ni-MH 1900mAh)
Depending on battery type, usage, and environmental conditions.
Dimensions: ATW-T3202 (without capsule): 193 mm (7.60") long, 37 mm (1.46") maximum diameter
ATW-T3202/C510: 265 mm (10.43") long, 54 mm (2.13") maximum diameter
ATW-T3202/C710: 271 mm (10.67") long, 50 mm (1.97") maximum diameter
Net Weight: ATW-T3202 (without capsule): 200 g (7.1 oz), without batteries
ATW-T3202/C510: 330 g (11.6 oz), without batteries
ATW-T3202/C710: 314 g (11.1 oz), without batteries
Body Pack
RF Power Output: High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Battery Life: High: 8.0 hours (alkaline), Low: 9.0 hours (alkaline)
High: 9.0 hours (Ni-MH 1900mAh), Low: 9.5 hours (Ni-MH 1900mAh)
Depending on battery type, usage, and environmental conditions.
Battery Type: Two 1.5V AA, not included
Dimensions: 64 mm x 82 mm x 23 mm (W x D x H)
2.52" x 3.22" x 0.91" (W x D x H)
Input Connections: cH-style screw-down 4-pin connector
Pin 1: GND
Pin 2: INST INPUT
Pin 3: MIC INPUT
Pin 4: DC BIAS +5V
Net Weight: 102 g (3.6 oz), without batteries
Spurious Emissions: Following Federal and National Regulations
High-pass (low-freq. roll-off) 125Hz, 12dB/octave
Receiver
Receiving System: True Diversity
Image Rejection: 60 dB nominal
RF Sensitivity: 20 dBuV at 60 dBA S/N ratio (50 ohms termination)
Maximum Output Level: XLR, balanced: +14 dBV
6.3 mm (1/4"), unbalanced: +8 dBV
Antenna Input: BNC-type, 50 ohms
Antenna Power: 12 V DC, 160 mA (combined)
Power Supply: 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply
Dimensions: 210.0 mm x 191.0 mm x 43.4 mm (W x D x H)
8.27" x 7.52" x 1.71" (W x D x H)
Weight: 1100 g (38.8 oz), without accessories
Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount Adapters
----------------------------------------------------------------------------------------------------------------
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Items are well packed and shipped USPS, UPS or Freight Service. Items purchased on Friday may not ship until Monday or until the projected processing period. We are working hard to get your unit Built ( if needed), processed and shipped. Processing Times do vary
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.
Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches, scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees & accessories or your return may be subject to a return handling charge.
Refunds are for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service/restocking fee. This item is now used and it would be unfair to resell to another customer as new.
The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, strings, computers, vacuum tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes & polishing cloths, software/sound ware, books, CDs, DVD's, vinyl records, and videos.
Audio-Technica BP892XCW-TH Wireless Omnidirectional Condenser Headworn Micro Set
The BP892xcW-TH includes a 1.4 m permanently attached miniature cable. Its end connects to a locking 4-pin connector. The connector is also compatible with Audio-Technica UniPak® cW type body-pack transmitters.
Specifications
Element:Fixed-charge back plate, permanently polarized condenser
Polar Pattern:Omnidirectional
Frequency Response:20 ~ 20,000 Hz
Open Circuit Sensitivity:-43 dB (7.2 mV) re 1V at 1 Pa
Maximum Input Sound Level:136 dB SPL, 1 kHz at 1% T.H.D.
Signal-To-Noise Ratio:63 dB, 1 kHz at 1 Pa
Current Consumption:0.1mA typical at 5V
Power Supply:2.5 ~ 11V DC
Weight:Microphone, boom & earpiece: 2.6 g
Dimensions:Microphone: 9.5 mm long, 2.6 mm diameter
Boom: 98.5 mm long, 1.07 mm diameter
Output Connector:cW-style locking 4-pin connector
Cable:1.4 m long, 1.6 mm diameter, 2-conductor shielded cable
Accessories Furnished:AT8440 cable clip;
AT8464x dual-ear mount;
AT8157 windscreens;
AT8171 windscreens;
two AT8156 element covers;
moisture guard;
carrying case
Colour:Beige
Features:
Subminiature omnidirectional condenser capsule offers extremely intelligible, natural vocal reproduction
BP892xcW-TH is beige colour model and constructed of hypoallergenic materials
Inconspicuous, lightweight headset with capsule diameter of just 2.6 mm is ideal for applications requiring minimum visibility
Ergonomic under-ear design - the flexible, lightweight, contoured loop hooks behind the ear for an ultra-secure, comfortable fit even for those wearing glasses
Detachable, field-replaceable cable with robust connector at the earset and a variety of available output terminations
Handles high sound pressure levels with ease
Equipped with cW-style locking 4-pin termination for Audio-Technica wireless systems
Comes with the AT8464x Dual-Ear Adapter Kit that converts the single-ear MicroSet to a unit that's worn on both ears for maximum stability and comfort
----------------------------------------------------------------------------------------------------------------
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Items are well packed and shipped USPS, UPS or Freight Service. Items purchased on Friday may not ship until Monday or until the projected processing period. We are working hard to get your unit Built ( if needed), processed and shipped. Processing Times do vary
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.
Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches, scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees & accessories or your return may be subject to a return handling charge.
Refunds are for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service/restocking fee. This item is now used and it would be unfair to resell to another customer as new.
The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, strings, computers, vacuum tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes & polishing cloths, software/sound ware, books, CDs, DVD's, vinyl records, and videos.
Audio-Technica AT4053B Vocal & Instrument Hypercardioid Condenser Microphone
Ships Free!
This versatile studio performer may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the microphone is totally free of the distortion associated with conventional transformer-coupled outputs. And its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments. The microphone is fully RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).
Features
Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement
Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
Direct-coupled, balanced output results in a clean signal even under high-output conditions
Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
Switchable 80 Hz hi-pass filter and 10 dB pad
Rugged turned-brass microphone housing for enduring dependability
State-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standards
RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)
Specifications
Microphones
Element: Externally polarized (DC bias) capacitor
Polar Pattern: Hypercardioid
Frequency Response: 20-20,000 Hz
Low Frequency Roll Off: 80 Hz, 18 dB/octave
Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa
Maximum Input Sound Level:
145 dB SPL, 1 kHz at 1% T.H.D.;
155 dB SPL, with 10 dB pad (nominal)
Noise: 16 dB SPL
Dynamic Range: 129 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 78 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 48V DC, 4.8 mA typical
Switches: Flat, roll-off; 10 dB pad (nominal)
Weight: 127 g (4.5 oz)
Dimensions: 155.0 mm (6.10") long,
21.0 mm (0.83") maximum body diameter
Output Connector: Integral 3-pin XLRM-type
Optional Interchangeable Elements:
AT4049b-EL (omnidirectional);
AT4051b-EL (cardioid)
Accessories Included: AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; protective carrying case
Audio-Technica Case Style: S1
----------------------------------------------------------------------------------------------------------------
Echotone Music LLC is an experienced E-commerce Audio & Musical instrument dealer since 1998. We take pride in selling quality gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Items are well packed and shipped USPS, UPS or Pallet Freight Service. Items purchased on Friday may not ship until Monday or until the projected processing period. We are working hard to get your unit Built ( if needed), processed and shipped.
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.
Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches, scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees & accessories or your return may be subject to a return handling charge.
Refunds or for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, strings, reeds, computers, tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes & polishing cloths, software/soundware, books, CDs, DVD's, vinyl records, and videos.
Happy customers, that's music to our ears!
Audio-Technica ATM450 Side Address Cardioid Condenser Instrument Microphone
Ships Free!
One of the new stars of the Artist Series remake, the ATM450 cardioid condenser offers an innovative side-address stick design for endless placement options and minimal obstructions. The microphone is equipped with an integral 80 Hz hi-pass filter that provides easy switching from a flat frequency response to a low-end roll-off. The ATM450 also features a switchable 10 dB pad that lowers the microphone's sensitivity, providing higher SPL capability for flexible use with a wide range of performers and system configurations. The microphone’s extended flat frequency response makes it ideal for high SPLs as well as for live and amplified acoustic instruments. Includes a professional isolation clamp to provide secure mounting, versatile positioning and effective dampening of unwanted mechanical noise.
Features
Unique side-address stick design maximizes placement options with minimal obstructions
Uncompromising sound quality for overheads, percussion, acoustic guitar, strings and other acoustic instruments
Integral 80 Hz HPF switch and 10 dB pad
Durable performance for professional applications
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
Rugged, all-metal design and construction for years of trouble-free use
Includes isolation clamp for shock protection, secure mounting and easy positioning
Specifications
Microphones
Element: Fixed-charge back plate permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 40-20,000 Hz
Low Frequency Roll Off: 80 Hz, 18 dB/octave
Open Circuit Sensitivity: –41 dB (8.9 mV) re 1V at 1 Pa
Maximum Input Sound Level: 152 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 127 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 69 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 3.5 mA typical
Switches: Flat, roll-off; 10 dB pad
Weight: 98 g (3.5 oz)
Dimensions:
126.9 mm (5.00") long,
21.0 mm (0.83") diameter
Output Connector: Integral 3-pin XLRM-type
Accessories Included: AT8471 isolation clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; windscreen; soft protective pouch
Audio-Technica Case Style: S11
----------------------------------------------------------------------------------------------------------------
Echotone Music LLC is an experienced long time E-commerce Audio & Musical instrument dealer since 1998. We take pride in selling quality gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Items are well packed and shipped USPS, UPS or Pallet Freight Service. Items purchased on Friday may not ship until Monday or until the projected processing period. We are working hard to get your unit Built ( if needed), processed and shipped.
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.
Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches, scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees & accessories or your return may be subject to a return handling charge.
Refunds or for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, strings, reeds, computers, tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes & polishing cloths, software/soundware, books, CDs, DVD's, vinyl records, and videos.
Happy customers, that's music to our ears!
Audio-Technica AE5100 Acoustic Guitars Cardioid Condenser Instrument Microphone
Ships Free!
The Artist Elite® AE5100 large diaphragm cardioid condenser instrument microphone provides uncompromising sound quality for overheads, percussion, acoustic guitar, strings and other acoustic instruments. With rich, warm, accurate sound, the AE5100 also incorporates the most essential ingredients for quality live sound in a choir microphone. Its large-diaphragm capsule delivers accurate, natural response, while its low-profile design permits innovative placement options. With a lower profile than the large studio microphones to which it compares sonically, the AE5100 offers an outstanding performance-to-size ratio. With its low noise and smooth response, the AE5100 is ideal for recording, too.
Features
Large-diaphragm capsule delivers accurate and natural response
Low-profile design permits innovative placement options previously unattainable with a large-diaphragm condenser
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
Robust design for enduring dependability on the road
Includes isolation clamp for shock protection, secure mounting and easy positioning
Integral 80 Hz HPF switch and 10 dB pad
Specifications
Microphones
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 20-20,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -36 dB (15.8 mV) re 1V at 1 Pa
Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.;
158 dB SPL with 10 dB pad (nominal)
Noise: 11 dB SPL
Dynamic Range: 137 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 83 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 3.2 mA typical
Switches:
High-pass filter;
10 dB pad (nominal)
Weight: 5.0 oz (143 g)
Dimensions: 5.85" (148.5 mm) long,
1.02" (26.0 mm) maximum diameter
Output Connector: Integral 3-pin XLRM-type
Accessories Included: AT8471 isolation clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8136 windscreen; soft protective pouch
Audio-Technica Case Style: S4
----------------------------------------------------------------------------------------------------------------
Echotone Music LLC is an experienced long time E-commerce Audio & Musical instrument dealer since 1998. We take pride in selling quality gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Items are well packed and shipped USPS, UPS or Pallet Freight Service. Items purchased on Friday may not ship until Monday or until the projected processing period. We are working hard to get your unit Built ( if needed), processed and shipped.
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.
Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches, scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees & accessories or your return may be subject to a return handling charge.
Refunds or for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, strings, reeds, computers, tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes & polishing cloths, software/soundware, books, CDs, DVD's, vinyl records, and videos.
Happy customers, that's music to our ears!
Audio Technica U857Q Condenser Quick Mount Gooseneck Microphone XLRF Type
Ideal for conference centers, boardrooms, courtrooms, houses of worship, and other installed applications, the U857Q is designed to plug directly into a panel- or desk-mounted XLRF-type connector. Offering unsurpassed immunity from radio frequency interference thanks to Audio-Technica’s UniGuard® innovations, this quick-mount microphone features an ultra-flexible, small-diameter gooseneck and accepts interchangeable elements – omnidirectional (360°), cardioid (120°), hypercardioid (100°), and UniLine® (90°) – available separately. Equipped with self-contained electronics, the phantom-powered microphone also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise.
Features:
• Accepts interchangeable elements to permit angle of acceptance from 90° to 360°
• Designed for high-quality sound reinforcement, professional recording and broadcasting
• Easy-to-adjust, rugged, small-diameter, alternating gooseneck with virtually no “memory” permits quick positioning into desired shape
• Included shock mount attenuates noise, shock and vibration transmitted through the mounting surface
• Quick-mount design with 3-pin XLRM-type connector insert at base plugs into any standard XLRF-type surface or cable connector
• Self-contained electronics eliminate need for external power module
• Superior off-axis rejection for maximum gain before feedback
• Two-stage foam windscreen yields dramatically improved resistance to P-pops and other breath blasts
• UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
• UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
Specifications:
• ELEMENT Fixed-charge back plate, permanently polarized condenser
• POLAR PATTERN Cardioid
• FREQUENCY RESPONSE 30-20,000 Hz
• LOW FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave
• OPEN CIRCUIT SENSITIVITY –39 dB (11.2 mV) re 1V at 1 Pa
• IMPEDANCE 250 ohms
• MAXIMUM INPUT SOUND LEVEL 139 dB SPL, 1 kHz at 1% T.H.D.
• DYNAMIC RANGE (typical) 115 dB, 1 kHz at Max SPL
• SIGNAL-TO-NOISE RATIO 70 dB, 1 kHz at 1 Pa
• PHANTOM POWER REQUIREMENTS 11-52V DC, 2 mA typical
• SWITCH Flat, roll-off
• WEIGHT 5.1 oz (144 g)
• DIMENSIONS 14.37" (365.0 mm) long, 0.48" (12.2 mm) head diameter, 0.74" (18.9 mm) base diameter
• OUTPUT CONNECTOR Integral 3-pin XLRM-type
• OPTIONAL INTERCHANGEABLE ELEMENTS UE-H hypercardioid (100°); UE-O omnidirectional (360°); UE-UL UniLine® (90°)
• ACCESSORIES FURNISHED AT8153 two-stage foam windscreen; AT8662 shock mount
Audio-Technica ATW-1312/L Digital Wireless Handheld Lavalier Microphone Bodypack
Ships Free!
ATW-RC13 Rack-mount receiver chassis, ATW-RU13x2 receiver unit, ATW-T1002 handheld dynamic unidirectional microphone/transmitter and ATW-T1001 body-pack transmitter with MT830cW lavalier microphone.
Specifications:
Operating Frequencies: 2.4 GHz ISM band (2400 to 2483.5 MHz)
Frequency Response: 20 Hz to 20 kHz
Depending on microphone type
Operating Range: 60 m (200') Open range env. with no interfering signals
Total Harmonic Distortion: <0.05% typical
Operating Temperature Range: 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures
Handheld Transmitter
RF Power Output: 10 mW
Spurious Emissions: Following federal and national regulations
Battery Type: Two 1.5V AA
not included
Battery Life: >7 hours (alkaline)
Depending on battery type and use pattern
Dimensions: 254.8 mm (10.03") long, 50.0 mm (1.97") diameter
Net Weight: 280 grams (9.9 oz)
without batteries
Accessories Included: AT8456a Quiet-Flex™ stand clamp
Body Pack
RF Power Output: 10 mW
Battery Life: >7 hours (alkaline)
Depending on battery type and use pattern
Battery Type: Two 1.5V AA
not included
Dimensions: 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D
Input Connections: Four-pin Locking Connector
Pin 1: GND, Pin 2: INST INPUT,
Pin 3: MIC INPUT, Pin 4: DC BIAS +9V
Net Weight: 100 grams (3.5 oz)
without batteries
Spurious Emissions: Following federal and national regulations
Receiver
Receiving System: Diversity (frequency/time/space)
Maximum Output Level: XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV
Power Supply: 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external
Operating Temperature Range: 40° F (4° C) to 110° F (43° C)
Dimensions: 209.8 mm (8.26") W x 44 mm (1.73") H x 169.3 mm (6.67") D
Weight: 940 grams (33.2 oz)
Accessories Included AC adapter, Link cable, Rack-mount adapters, Joining plate, Rubber feet
Output Connector: Remote Receiver Connector: RJ45
Link Connector: RJ12
----------------------------------------------------------------------------------------------------------------
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Items are well packed and shipped USPS, UPS or Freight Service. Items purchased on Friday may not ship until Monday or until the projected processing period. We are working hard to get your unit Built ( if needed), processed and shipped. Processing Times do vary
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.
Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches, scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees & accessories or your return may be subject to a return handling charge.
Refunds are for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service/restocking fee. This item is now used and it would be unfair to resell to another customer as new.
The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, strings, computers, vacuum tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes & polishing cloths, software/sound ware, books, CDs, DVD's, vinyl records, and videos.
Audio-Technica ATW-3211DE2 Series Wireless Body Pack Microphone 4 Pin Connector
ATW-R3210 receiver and ATW-T3201 body-pack transmitter with cH-style screw-down 4-pin connector. Select a microphone or cable with a cH-style screw-down 4-pin connector to complete the system. Available separately, the AT-cWcH Adapter Cable enables wireless microphones with a cW-style locking 4-pin connector to be used with body-pack transmitters that have a cH-style screw-down 4-pin connector.
Specifications:
Operating Frequencies: Band DE2: 470.125 to 529.975 MHz (2395 frequencies)
Band EE1: 530.000 to 589.975 MHz (2400 frequencies)
Band EF1: 590.000 to 649.975 MHz (2400 frequencies)
Band FG1: 650.000 to 699.875 MHz (1996 frequencies)
Operating Frequencies: Band DE2: 470.125 to 529.975 MHz (2395 frequencies)
Band EE1: 530.000 to 589.975 MHz (2400 frequencies)
Band EF1: 590.000 to 649.975 MHz (2400 frequencies)
Band FG1: 650.000 to 699.875 MHz (1996 frequencies)
Please note that some frequency bands might not be available in your territory or could come with a limited tuning bandwidth / transmitting power due to local regulations.
Minimum Frequency Step: 25 kHz
Modulation Mode: FM
Maximum Deviation: ATW-T3201: ±38 kHz (THD:10%)
ATW-T3202: ±36 kHz (THD:10%)
Frequency Response: ATW-T3201: 31 Hz to 15,500 Hz
ATW-T3202: 25 Hz to 16,700 Hz
Frequency response depends on attached microphone element
Operating Range: 100 m (328')
Open range environment with no interfering signals.
Total Harmonic Distortion: <1.0% (at 1 kHz, ±17.5 kHz deviation)
Operating Temperature Range: -5° C to +45° C (23° F to 113° F)
Simultaneous Use: 40 Channels per band*
For assistance with multi-band operation or other frequency coordination issues, please contact your regional Audio-Technica customer service representitive. *Region and band dependent
Handheld Transmitter
RF Power Output: High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Spurious Emissions: Following Federal and National Regulations
Microphone Capsule: Interchangable industry standard thread
Battery Type: Two 1.5V AA, not included
Battery Life: High: 8.0 hours (alkaline), Low: 9.0 hours (alkaline)
High: 9.0 hours (Ni-MH 1900mAh), Low: 9.5 hours (Ni-MH 1900mAh)
Depending on battery type, usage, and environmental conditions.
Dimensions: ATW-T3202 (without capsule): 193 mm (7.60") long, 37 mm (1.46") maximum diameter
ATW-T3202/C510: 265 mm (10.43") long, 54 mm (2.13") maximum diameter
ATW-T3202/C710: 271 mm (10.67") long, 50 mm (1.97") maximum diameter
Net Weight: ATW-T3202 (without capsule): 200 g (7.1 oz), without batteries
ATW-T3202/C510: 330 g (11.6 oz), without batteries
ATW-T3202/C710: 314 g (11.1 oz), without batteries
Body Pack
RF Power Output: High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Battery Life: High: 8.0 hours (alkaline), Low: 9.0 hours (alkaline)
High: 9.0 hours (Ni-MH 1900mAh), Low: 9.5 hours (Ni-MH 1900mAh)
Depending on battery type, usage, and environmental conditions.
Battery Type: Two 1.5V AA, not included
Dimensions: 64 mm x 82 mm x 23 mm (W x D x H)
2.52" x 3.22" x 0.91" (W x D x H)
Input Connections: cH-style screw-down 4-pin connector
Pin 1: GND
Pin 2: INST INPUT
Pin 3: MIC INPUT
Pin 4: DC BIAS +5V
Net Weight: 102 g (3.6 oz), without batteries
Spurious Emissions: Following Federal and National Regulations
High-pass (low-freq. roll-off): 125Hz, 12dB/octave
Receiver
Receiving System: True Diversity
Image Rejection: 60 dB nominal
RF Sensitivity:: 20 dBuV at 60 dBA S/N ratio (50 ohms termination)
Maximum Output Level: XLR, balanced: +14 dBV
6.3 mm (1/4"), unbalanced: +8 dBV
Antenna Input: BNC-type, 50 ohms
Antenna Power: 12 V DC, 160 mA (combined)
Power Supply: 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply
Dimensions: 210.0 mm x 191.0 mm x 43.4 mm (W x D x H)
8.27" x 7.52" x 1.71" (W x D x H)
Weight: 1100 g (38.8 oz), without accessories
Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount Adapters
----------------------------------------------------------------------------------------------------------------
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Items are well packed and shipped USPS, UPS or Freight Service. Items purchased on Friday may not ship until Monday or until the projected processing period. We are working hard to get your unit Built ( if needed), processed and shipped. Processing Times do vary
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.
Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches, scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees & accessories or your return may be subject to a return handling charge.
Refunds are for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service/restocking fee. This item is now used and it would be unfair to resell to another customer as new.
The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, strings, computers, vacuum tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes & polishing cloths, software/sound ware, books, CDs, DVD's, vinyl records, and videos.
Audio-Technica ATW-2129BI 2000 Series Wireless Lavalier Microphone System
Ships Free!
ATW-R2100b receiver and ATW-T210b body-pack transmitter with AT829cW lavalier microphone.
Specifications
Operating Frequencies: UHF
Band D: 656.125 to 678.500 MHz DISCONTINUED IN NORTH AMERICA
Band I : 487.125 to 506.500 MHz
Modulation Mode: FM
Maximum Deviation: ±40 kHz
Frequency Response: 100 Hz to 15 kHz (+1 dB, -3 dB)
Operating Range: 100 m (300'), typical
Open range environment with no interfering signals.
Total Harmonic Distortion: < 1% (at 1 kHz, ±20 kHz deviation)
Operating Temperature Range: 5º C to 45º C
41º F to 113º F
Battery and LCD performance may be reduced at very low temperatures.
Number Of Channels: 10 total
Notes: Third-generation 2000 Series (“b” version) components:
ATW-R2100b receiver
ATW-T210b body-pack transmitter
ATW-T220b cardioid dynamic microphone/transmitter
Click here for “b” version 2000 Series owner’s manual.
Second-generation 2000 Series (“a” version) components:
ATW-R2100a receiver
ATW-T210a body-pack transmitter
ATW-T220a cardioid dynamic microphone/transmitter
Click here for “a” version 2000 Series owner’s manual.
First-generation 2000 Series (original) components:
ATW-R2100 receiver
ATW-T210 body-pack transmitter
ATW-T220 cardioid dynamic microphone/transmitter
Click here for original 2000 Series owner’s manual.
CONSUMER ALERT
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.
Handheld Transmitter
RF Power Output: High: 30 mW; Low: 10 mW (switchable), at 50 ohms
Spurious Emissions: Following federal and national regulations
Microphone Element: Dynamic cardioid
Battery Type: Two 1.5V AA alkaline (not included)
or two 1.2V AA NiMH (not included)
Recharging power for NiMH batteries (with ATW-CHG2)
U.S./Canada/Latin America: 3.2 V DC, 230 mA x2
Other world areas: 3.2 V DC, 320 mA x2
Battery Life: High: 7 hours (alkaline)
Low: 9 hours (alkaline)
Depending on battery type and use pattern.
Dimensions: 232.0 mm (9.13") long,
48.0 mm (1.89") diameter
Net Weight: 252 g (8.9 oz), without batteries
Accessories Included: AT8456a Quiet-Flex™ stand clamp
Body Pack
RF Power Output: High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Battery Life: High: 7 hours (alkaline)
Low: 9 hours (alkaline)
Depending on battery type and use pattern.
Battery Type: Two 1.5V AA alkaline (not included)
or two 1.2V AA NiMH (not included)
Recharging power for NiMH batteries (with ATW-CHG2)
U.S./Canada/Latin America: 3.2 V DC, 230 mA x2
Other world areas: 3.2 V DC, 320 mA x2
Dimensions: 66.0 mm (2.60") W x
22.5 mm (0.89") D x
92.3 mm (3.63") H
Input Connections: Four-pin Locking Connector
Pin 1: GND
Pin 2: INST INPUT
Pin 3: MIC INPUT
Pin 4: DC BIAS +9V
Net Weight: 81 g (2.9 oz), without batteries
Spurious Emissions Following federal and national regulations
Receiver
Receiving System: True diversity
Image Rejection: 60 dB nominal, 55 dB minimum
RF Sensitivity: 20 dBuV at 60 dB S/N ratio
(50 ohms termination)
Antenna Input: BNC-type, 50 ohms
Bias voltage 12V DC, 60 mA, each
Power Requirements: 12-18V DC, 500 mA
Dimensions: 210.0 mm (8.27") W x
162.2 mm (6.39") D x
44.0 mm (1.73") H
Not including BNC connectors or feet.
Weight: 1.0 kg (35.3 oz), without accessories
Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters
ADDITIONAL RECEIVER SPECS
Maximum Output Level:
XLR, balanced: +9 dBV
¼" (6.3 mm), unbalanced: +4 dBV
Balanced Audio Output Attenuator:
Two position switch: 0 / -12 dB
----------------------------------------------------------------------------------------------------------------
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Items are well packed and shipped USPS, UPS or Freight Service. Items purchased on Friday may not ship until Monday or until the projected processing period. We are working hard to get your unit Built ( if needed), processed and shipped. Processing Times do vary
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.
Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches, scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees & accessories or your return may be subject to a return handling charge.
Refunds are for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service/restocking fee. This item is now used and it would be unfair to resell to another customer as new.
The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, strings, computers, vacuum tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes & polishing cloths, software/sound ware, books, CDs, DVD's, vinyl records, and videos.
Audio-Technica ATW-901A/L System 9 Wireless System with Lavalier Microphone
Ships Free!
ATW-R900a receiver and ATW-T901a body-pack transmitter with omnidirectional lavalier microphone.
Specifications
Overall System
Operating Frequencies: VHF highband, 169 MHz to 172 MHz
Modulation Mode: FM
Maximum Deviation: +/-10 kHz
Frequency Response: 80 Hz to 13 kHz
Operating Range:
200' (60 m) typical
Open range environment with no interfering signals
Total Harmonic Distortion: <1% (at 1 kHz, +/-10 kHz deviation)
Operating Temperature Range:
40° F (4° C) to 110° F (43° C)
Battery performance may be reduced at very low temperatures
Notes:
First-generation System 9 (original) components:
ATW-R900 receiver
ATW-T901 body-pack transmitter
ATW-T902 unidirectional dynamic microphone transmitter
Handheld Transmitter
RF Power Output: 10 mW
Spurious Emissions: Following federal and national regulations
Battery Type:
Two 1.5V AA
not included
Battery Life:
8 hours (alkaline)
Depending on battery type and use pattern
Dimensions:
9.91" (251.8 mm) long,
2.11" (53.5 mm) diameter
Net Weight: 9.2 oz (260 grams)
without batteries
Accessories Included: AT8456a Quiet-Flex™ stand clamp
Body Pack
RF Power Output 10 mW
Battery Life:
8 hours (alkaline)
Depending on battery type and use pattern
Battery Type:
Two 1.5V AA
not included
Dimensions: 2.76" (70.2 mm) W x 4.08" (103.7 mm) H x 0.98" (24.9 mm) D
Input Connections:
Four-pin Locking Connector
Pin 1: GND
Pin 2: INST INPUT
Pin 3: MIC INPUT
Pin 4: DC BIAS +9V
Net Weight: 2.8 oz (80.0 grams)
without batteries
Spurious Emissions: Following federal and national regulations
Receiver
Receiving System: Non-diversity, single-channel, dual antenna system
Image Rejection: 50 dB minimum
RF Sensitivity: 20 dBuV at 60 dB S/N ratio (50 ohms termination)
Power Supply: 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply
Operating Temperature Range: 40° F (4° C) to 110° F (43° C)
Dimensions: 7.48" (190.0 mm) W x 1.82" (46.2 mm) H x 5.06" (128.5 mm) D
Weight 12.0 oz (337 grams)
Accessories Included: Power supply
Audio Output:
Nominal Output Level
XLR, balanced: 350 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load)
1/4" (6.3 mm), unbalanced: 700 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load)
----------------------------------------------------------------------------------------------------------------
Echotone Music LLC is an experienced E-commerce Audio & Musical instrument dealer since 1998. We take pride in selling quality gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Items are well packed and shipped USPS, UPS or Pallet Freight Service. Items purchased on Friday may not ship until Monday or until the projected processing period. We are working hard to get your unit Built ( if needed), processed and shipped.
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.
Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches, scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees & accessories or your return may be subject to a return handling charge.
Refunds or for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, strings, reeds, computers, tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes & polishing cloths, software/soundware, books, CDs, DVD's, vinyl records, and videos.
Happy customers, that's music to our ears!
Audio-Technica U853R Cardioid Condenser Hanging Microphone for Recording Application
Perfect for speech, theater, orchestra, and choir sound reinforcement and recording, the U853 condenser hanging microphone is equipped with UniGuard® innovations that offer unsurpassed immunity from radio frequency interference. This phantom-powered microphone accepts interchangeable elements – omnidirectional (360°), cardioid (120°), hypercardioid (100°)
U853R: cardioid polar pattern (120° acceptance angle); 25.0' (7.6 m) cable terminated with a TA3F connector for use with the included AT8538 phantom power only in-line power module (80 Hz high-pass UniSteep® filter); black finish.
Features
Designed for suspension over choirs, instrumental groups and theater stages
Wall/ceiling plate power module permits permanent installation in standard metal U.S. single gang electrical box
Superior off-axis rejection for maximum gain before feedback
UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
Accepts interchangeable elements to permit angle of acceptance from 90° to 360°
Low-profile design with low-reflectance finish for minimum visibility
Specifications
Microphones
Element: Fixed-charge back plate, permanently polarized condenser
Frequency Response: 30-20,000 Hz
Low Frequency Roll Off: 80 Hz, 18 dB/octave
Open Circuit Sensitivity: -39 dB (11.2 mV) re 1V at 1 Pa
Maximum Input Sound Level: 139 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 115 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 70 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 2 mA typical
Switches: Flat, roll-off
Weight (Microphone): 0.5 oz (14 g)
Weight (Power Module): 2.9 oz (81 g)
Weight: 14 g (0,5 oz)
Cable: 25.0' (7.6 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2 conductor shielded cable with TA3F-type connector
Dimensions: 1.34" (34.0 mm) long, 0.48" (12.2 mm) diameter
Dimensions (Power Module):
3.66" (92.9 mm) long,
0.74" (18.9 mm) diameter
Dimensions (Microphone):
1.34" (34.0 mm) long,
0.48" (12.2 mm) diameter
Output Connector (Power Module): Integral 3-pin XLRM-type
Output Connector: Integral 3-pin XLRM-type
Accessories Included: AT8153 two-stage foam windscreen; AT8451 steel hanger; AT8538 power module; AT8438 5/8"-27 stand adapter
Audio-Technica Case Style: M12
----------------------------------------------------------------------------------------------------------------
Echotone Music LLC is an experienced long time E-commerce Audio & Musical instrument dealer since 1998. We take pride in selling quality gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Items are well packed and shipped USPS, UPS or Pallet Freight Service. Items purchased on Friday may not ship until Monday or until the projected processing period. We are working hard to get your unit Built ( if needed), processed and shipped.
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.
Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches, scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees & accessories or your return may be subject to a return handling charge.
Refunds or for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, strings, reeds, computers, tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes & polishing cloths, software/soundware, books, CDs, DVD's, vinyl records, and videos.
Happy customers, that's music to our ears!
Audio-Technica AT4050 Multi-Pattern Vocal & Instrument Studio Condenser Microphone
Ships Free!
Meet the studio condenser that captures every nuance. With three switchable polar patterns, the large-diaphragm Audio-Technica AT4050 exhibits a remarkable combination of qualities: high-SPL capability with transparent and airy uppers/mids complemented by rich low-end qualities. Its dual large diaphragms are gold-vaporized and aged for consistent, outstanding performance. A precision-machined, nickel-plated brass acoustic element baffle provides rock-solid element stability and exceptional sensitivity.
Ideal for studio use and live sound productions with vocals, piano, strings, drum overheads, guitar amps, and more.
Audio-Technica’s AT4050. For performance that legends are made of.
Features
Transparent uppers/mids balanced by rich low-end qualities combine with advanced acoustic engineering for extensive performance capabilities and highest quality
Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone
The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics achieved remain constant over years of use
Three switchable polar patterns: omni, cardioid, figure-of-eight
Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
Switchable 80 Hz hi-pass filter and 10 dB pad
Custom shock mount provides superior isolation
Specifications
Element: Externally-polarized (DC bias) condenser
Polar Pattern: Cardioid, Omnidirectional, Figure-of-eight
Frequency Response: 20-18,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -36 dB (15.8 mV), re 1V at 1 Pa
Maximum Input Sound Level:
149 dB SPL, 1 kHz at 1% T.H.D.;
159 dB SPL, with 10 dB pad (nominal)
Noise: 17 dB
Dynamic Range: 132 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 77 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 48V DC, 4.2 mA typical
Switches:
Polar selection;
Flat, roll-off;
10 dB pad (nominal)
Weight: 18.0 oz (510 g)
Dimensions: 7.40" (188.0 mm) long,
2.10" (53.4 mm) maximum body diameter
Output Connectors: Integral 3-pin XLRM-type
Accessories Included: AT8449a shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case
Audio-Technica Case Style: R1
----------------------------------------------------------------------------------------------------------------
Echotone Music LLC is an experienced long time E-commerce Audio & Musical instrument dealer since 1998. We take pride in selling quality gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Items are well packed and shipped USPS, UPS or Pallet Freight Service. Items purchased on Friday may not ship until Monday or until the projected processing period. We are working hard to get your unit Built ( if needed), processed and shipped.
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.
Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches, scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees & accessories or your return may be subject to a return handling charge.
Refunds or for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, strings, reeds, computers, tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes & polishing cloths, software/soundware, books, CDs, DVD's, vinyl records, and videos.
Happy customers, that's music to our ears!
Audio-Technica AT4033A Pro Studio Recording Cardioid Condenser Microphone
Ships Free!
Cardioid Condenser Microphone
The side-address AT4033a offers low-noise, symmetrical, transformerless circuitry that results in exceptional transient response and clean output signals.
The legend, The revolution
The AT4033 cardioid condenser microphone has been considered an essential product in most professional recording studios since 1991, when it became the first high-quality studio microphone released for under $1000, at a time when most competing products were retailing for around $2000. The internal electronics of the original version have been somewhat modified with the arrival of the AT4033a, as has the capsule suspension system, in order to maximise the reduction of any adjustment noises or vibrations. With its low noise (17dB SPL), high sensitivity and high tolerance to high sound pressure levels (up to 155dB with the 10dB pad), the AT4033a has an excellent quality / price / performance ratio that remains competitive to this day.
transformerless circuitry
Transformerless circuitry virtually elimiates low-frequency distortion and provides superior correlation of high-speed transients.
manufactured for quality
The AT4033a's diaphragm is protected by a two-layer grille and a thin acoustic foam.
AT8449a shock mount
Custom shock mount provides superior isolation against unwanted noise and vibration
2 MICRON thick DIAPHRAGM
The 2-micron-thick, vapor-deposited gold diaphragm undergoes a five-step aging process so that the optimum characteristics achieved remain constant over years of use
Features
Transformerless circuitry virtually eliminates low-frequency distortion and provides excellent transient response
Low-cut filter 80 Hz, 12 dB/Octave
Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
The 2-micron-thick, vapor-deposited gold diaphragm undergoes a five-step aging process so that the optimum characteristics achieved remain constant over years of use
AT8449a shock mount included
Made and assembled in Japan. Lifetime guarantee*
Specifications
Microphones
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 30 - 20,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -32 dB (25.1 mV) re 1V at 1 Pa
Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
Dynamic Range: 128 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 77 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 48V DC, 3.2 mA typical
Weight: 380g
Dimensions: 6.69" (170.0 mm) long, 2.10" (53.4 mm) maximum body diameter
Output Connector: Integral 3-pin XLRM-type
Accessories Included: AT8449a shock mount for 5/8"-27 threaded stands; protective carrying case
----------------------------------------------------------------------------------------------------------------
Echotone Music LLC is an experienced E-commerce Audio & Musical instrument dealer since 1998. We take pride in selling quality gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Items are well packed and shipped USPS, UPS or Pallet Freight Service. Items purchased on Friday may not ship until Monday or until the projected processing period. We are working hard to get your unit Built ( if needed), processed and shipped.
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.
Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches, scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees & accessories or your return may be subject to a return handling charge.
Refunds or for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, strings, reeds, computers, tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes & polishing cloths, software/soundware, books, CDs, DVD's, vinyl records, and videos.
Happy customers, that's music to our ears!
Audio-Technica AE3000 Large-diaphragm Cardioid Condenser Instrument Microphone
Ships Free!
The Artist Elite® AE3000 delivers supreme performance at extreme SPLs. This high-SPL large diaphragm cardioid condenser instrument mic excels in applications such as guitar cabinets, toms, snare, timpani, horns and overheads. Its large-diaphragm capsule combines with the open architecture of the headcase to provide an extremely accurate and open sound. Its low-profile side-address design with tapered grille allows for optimal positioning.
Features
Excels in high-SPL applications
Large-diaphragm capsule combines with the open architecture of the headcase to provide an extremely accurate and open sound
Low-profile side-address design with tapered grille allows optimal positioning of element vis-à-vis sound source
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
Robust design for enduring dependability on the road
Integral 80 Hz HPF switch and 10 dB pad
Specifications
Microphones
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 20-20,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -43 dB (7.0 mV) re 1V at 1 Pa
Maximum Input Sound Level:
148 dB SPL, 1 kHz at 1% T.H.D.;
158 dB SPL, with 10 dB pad (nominal)
Noise: 11 dB SPL
Dynamic Range: 137 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 83 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 3 mA typical
Switches: High-pass filter;
10 dB pad (nominal)
Weight: 6.0 oz (170 g)
Dimensions: 4.55" (115.5 mm) long,
1.89" (48.0 mm) maximum diameter
Output Connector: Integral 3-pin XLRM-type
Accessories Included: AT8471 isolation clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
Audio-Technica Case Style: R6
----------------------------------------------------------------------------------------------------------------
Echotone Music LLC is an experienced E-commerce Audio & Musical instrument dealer since 1998. We take pride in selling quality gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Items are well packed and shipped USPS, UPS or Pallet Freight Service. Items purchased on Friday may not ship until Monday or until the projected processing period. We are working hard to get your unit Built ( if needed), processed and shipped.
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.
Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches, scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees & accessories or your return may be subject to a return handling charge.
Refunds or for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, strings, reeds, computers, tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes & polishing cloths, software/soundware, books, CDs, DVD's, vinyl records, and videos.
Happy customers, that's music to our ears!
Audio-Technica ATW-RU13 System 10 Pro Receiver Unit 2 Detachable Antennas
Ships Free!
System 10 Pro Receiver Unit
ATW-RU13 System 10 Pro Receiver Unit - Receiver unit for System 10 Pro, Two detachable antennas with SMA connectors and LED status indicator
Features
The ATW-RU13 receiver unit features two detachable antennas that screw onto the face of the unit via SMA connectors. The rear of the unit is equipped with a ¼"-20 thread socket for mounting the receiver unit remotely to a tripod or other device with a ¼" screw. An RJ45 connector, also on the rear of the unit, allows a remotely mounted receiver unit to be connected to the chassis with UTP cable. An LED status indicator, located between the mount socket and the RJ45 connector, blinks slowly when the receiver unit is not paired with a transmitter, blinks quickly during the pairing process, and illuminates solidly green once the receiver unit is paired with a transmitter. An AT8690 RU13 Holder is supplied for each receiver unit, providing a convenient means to mount the unit remote
Specifications
Receiver
Receiving System: Diversity (frequency/time/space)
Dimensions: 209.8 mm (8.26") W x 44 mm (1.73") H x 169.3 mm (6.67") D
Weight: 940 grams (33.2 oz)
Accessories Included: Antennas, AT8690 RU13 holder
Connector: Remote Receiver Connector: RJ45
Link Connector: RJ12
----------------------------------------------------------------------------------------------------------------
Echotone Music LLC is an experienced E-commerce Audio & Musical instrument dealer since 1998. We take pride in selling quality gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Items are well packed and shipped USPS, UPS or Pallet Freight Service. Items purchased on Friday may not ship until Monday or until the projected processing period. We are working hard to get your unit Built ( if needed), processed and shipped.
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.
Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches, scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees & accessories or your return may be subject to a return handling charge.
Refunds or for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, strings, reeds, computers, tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes & polishing cloths, software/soundware, books, CDs, DVD's, vinyl records, and videos.
Happy customers, that's music to our ears!
Audio-Technica PRO92CW-TH Wireless Omnidirectional Condenser Headworn Microphone
The Audio-Technica PRO 92 wireless omnidirectional condenser headworn microphone offers a natural, smooth frequency response optimized for vocal articulation. The mic features a small condenser capsule; a lightweight, contoured earpiece; and a flexible boom that is easily repositioned for a comfortable fit.
PRO 92cH-TH: same as PRO 92cH but in "theater" color (beige).
Features
Comfortable headset is ideal for lecturers and other applications requiring clear, articulate vocal projection
Flexible, contoured earpiece hooks over either ear for a comfortable fit
Natural smooth frequency response optimized for vocal articulation
Rugged construction designed to stand up to the challenges of day-to-day use
Includes storage pouch and clothing clip
----------------------------------------------------------------------------------------------------------------
Echotone Music LLC is an experienced E-commerce Audio & Musical instrument dealer since 1998. We take pride in selling quality gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Items are well packed and shipped USPS, UPS or Pallet Freight Service. Items purchased on Friday may not ship until Monday or until the projected processing period. We are working hard to get your unit Built ( if needed), processed and shipped.
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.
Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches, scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees & accessories or your return may be subject to a return handling charge.
Refunds or for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, strings, reeds, computers, tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes & polishing cloths, software/soundware, books, CDs, DVD's, vinyl records, and videos.
Happy customers, that's music to our ears!
Audio-Technica ATWCHG2 Two-Bay Recharging Station for Handheld Transmitter & Microphone
Ships Free!
New to the 2000 Series, this two-bay recharging station provides power to recharge NiMH batteries in two ATW-T220a handheld transmitters and/or ATW-T210a UniPak® transmitters in any combination. Maintenance charging prevents battery self-discharge until the transmitter is removed from charger. The charger draws power from a standard wall outlet.
Features
NiMH batteries are charged within the transmitters
Versatile unit charges ATW-T220a handheld transmitters and/or ATW-T210a UniPak® transmitters (in any combination)
Built-in safety feature monitors cell voltage and automatically turns off the unit if problems are detected
Automatic shut-off if alkaline (non-rechargeable) batteries are installed
Automatic shut-off if damaged batteries are installed
Maintenance charging prevents battery self-discharge until the transmitter is removed from charger
----------------------------------------------------------------------------------------------------------------
Echotone Music LLC is an experienced E-commerce Audio & Musical instrument dealer since 1998. We take pride in selling quality gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Items are well packed and shipped USPS, UPS or Pallet Freight Service. Items purchased on Friday may not ship until Monday or until the projected processing period. We are working hard to get your unit Built ( if needed), processed and shipped.
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.
Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches, scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees & accessories or your return may be subject to a return handling charge.
Refunds or for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, strings, reeds, computers, tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes & polishing cloths, software/soundware, books, CDs, DVD's, vinyl records, and videos.
Happy customers, that's music to our ears!
Audio Technica U857QL Cardioid Condenser Quick Mount Gooseneck Microphone 481mm
Ideal for conference centers, boardrooms, courtrooms, houses of worship, and other installed applications, the U857QL is designed to plug directly into a panel- or desk-mounted XLRF-type connector. This cardioid condenser quick-mount gooseneck microphone offers unsurpassed immunity from radio frequency interference thanks to Audio-Technica's UniGuard® innovations. The 18.94" long microphone features an ultra-flexible small-diameter gooseneck and accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine® line cardioid polar patterns. Equipped with self-contained electronics, the phantom-powered microphone also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise.
Audio-Technica’s AT4050. For performance that legends are made of.
Features:
• Designed for high-quality sound reinforcement, professional recording and broadcasting
• Superior off-axis rejection for maximum gain before feedback
• UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
• Easy-to-adjust, rugged, small-diameter, alternating gooseneck with virtually no 'memory' permits quick positioning into desired shape
• UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
• Self-contained electronics eliminate need for external power module
• Accepts interchangeable elements to permit angle of acceptance from 90° to 360°
• Two-stage foam windscreen yields dramatically improved resistance to P-pops and other breath blasts
• Quick-mount design with 3-pin XLRM-type connector insert at base plugs into any standard XLRF-type surface or cable connector
• Included shock mount attenuates noise, shock and vibration transmitted through the mounting surface
Specifications:
• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern: Cardioid
• Frequency Response: 30 - 20,000 Hz
• Open Circuit Sensitivity: -39 dB (11.2 mV) re 1V at 1 Pa
• Impedance: 250 ohms
• Weight: 144 g
• Dimensions: 18.94" (481.0 mm) long, 0.48" (12.2 mm) head diameter, 0.74" (18.9 mm) base diameter
• Output Connector: Integral 3-pin XLRM-type
• Accessories Included: AT8153 two-stage foam windscreen; AT8662 shock mount
Audio-Technica PRO35 Cardioid Condenser Clip-on Instrument Microphone
Designed for sax, toms, brass, and percussion, the PRO 35 excels in high-SPL applications and is ideal for active stage performances. Its extended frequency response captures subtle nuances of the performance. The included AT8418 UniMount® clip permits accurate positioning and provides shock resistance while protecting the element. The microphone’s cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.
PRO 35: 6' (1.8 m) permanently attached miniature cable terminated with a TA3F connector for use with the included AT8538 phantom power only in-line power module (80 Hz high-pass filter).
Features
UniMount® clip permits accurate positioning, provides shock resistance and protects element
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
Extended frequency response captures subtle nuances of the performance 6' (1.8 m) cable permanently attached to microphone
Specifications
Microphones
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 50-15,000 Hz
Low Frequency Roll Off: 80 Hz, 18 dB/octave
Open Circuit Sensitivity: -45 dB (5.6 mV) re 1V at 1 Pa
Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 115 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 64 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 2 mA typical
Switches: Flat, roll-off
Weight (Microphone): 0.3 oz (8 g)
Weight (Power Module): 2.9 oz (81 g)
Cable: 6.0' (1.8 m)long (permanently attached to microphone), 0.10" (2.6 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
Dimensions (Power Module):
3.66" (92.9 mm) long,
0.74" (18.9 mm) diameter
Dimensions (Microphone):
0.98" (25.0 mm) long,
0.40" (10.2 mm) diameter
Output Connector (Power Module): Integral 3-pin XLRM-type
Accessories Included: AT8418 UniMount® microphone instrument mount; AT8538 power module; soft protective pouch
Audio-Technica Case Style: M12
----------------------------------------------------------------------------------------------------------------
Echotone Music LLC is an experienced long time E-commerce Audio & Musical instrument dealer since 1998. We take pride in selling quality gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Items are well packed and shipped USPS, UPS or Pallet Freight Service. Items purchased on Friday may not ship until Monday or until the projected processing period. We are working hard to get your unit Built ( if needed), processed and shipped.
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.
Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches, scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees & accessories or your return may be subject to a return handling charge.
Refunds or for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, strings, reeds, computers, tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes & polishing cloths, software/soundware, books, CDs, DVD's, vinyl records, and videos.
Happy customers, that's music to our ears!
Audio-Technica ATW-3211/892XEE1 3000 Series Wireless Headworn Microphone System
Ships Free!
ATW-R3210 receiver and ATW-T3201 body-pack transmitter with BP892xcH MicroSet omnidirectional condenser headworn microphone. Includes element covers, windscreens, clothing clip, and dual-ear adapter kit.
Specifications
Overall System
Operating Frequencies:
Band DE2: 470.125 to 529.975 MHz (2395 frequencies)
Band EE1: 530.000 to 589.975 MHz (2400 frequencies)
Band EF1: 590.000 to 649.975 MHz (2400 frequencies)
Band FG1: 650.000 to 699.875 MHz (1996 frequencies)
Minimum Frequency Step: 25 kHz
Modulation Mode: FM
Maximum Deviation:
ATW-T3201: ±38 kHz (THD:10%)
ATW-T3202: ±36 kHz (THD:10%)
Frequency Response:ATW-T3201: 31 Hz to 15,500 Hz
ATW-T3202: 25 Hz to 16,700 Hz
Frequency response depends on attached microphone element
Operating Range: 100 m (328')
Open range environment with no interfering signals.
Total Harmonic Distortion: <1.0% (at 1 kHz, ±17.5 kHz deviation)
Operating Temperature Range: -5° C to +45° C (23° F to 113° F)
Simultaneous Use:
40 Channels per band*
For assistance with multi-band operation or other frequency coordination issues, please contact your regional Audio-Technica customer service representitive. *Region and band dependent
Handheld Transmitter
RF Power Output: High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Spurious Emissions: Following Federal and National Regulations
Battery Type: Two 1.5V AA, not included
Battery Life:
High: 8.0 hours (alkaline), Low: 9.0 hours (alkaline)
High: 9.0 hours (Ni-MH 1900mAh), Low: 9.5 hours (Ni-MH 1900mAh)
Depending on battery type, usage, and environmental conditions.
Dimensions:
ATW-T3202 (without capsule): 193 mm (7.60") long, 37 mm (1.46") maximum diameter
ATW-T3202/C510: 265 mm (10.43") long, 54 mm (2.13") maximum diameter
ATW-T3202/C710: 271 mm (10.67") long, 50 mm (1.97") maximum diameter
Net Weight:
ATW-T3202 (without capsule): 200 g (7.1 oz), without batteries
ATW-T3202/C510: 330 g (11.6 oz), without batteries
ATW-T3202/C710: 314 g (11.1 oz), without batteries
Body Pack
RF Power Output: High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Battery Life:
High: 8.0 hours (alkaline), Low: 9.0 hours (alkaline)
High: 9.0 hours (Ni-MH 1900mAh), Low: 9.5 hours (Ni-MH 1900mAh)
Depending on battery type, usage, and environmental conditions.
Battery Type: Two 1.5V AA, not included
Dimensions:
64 mm x 82 mm x 23 mm (W x D x H)
2.52" x 3.22" x 0.91" (W x D x H)
Input Connections:
cH-style screw-down 4-pin connector
Pin 1: GND
Pin 2: INST INPUT
Pin 3: MIC INPUT
Pin 4: DC BIAS +5V
Net Weight: 102 g (3.6 oz), without batteries
Spurious Emissions: Following Federal and National Regulations
Receiver
Receiving System: True Diversity
Image Rejection: 60 dB nominal
Maximum Output Level:
XLR, balanced: +14 dBV
6.3 mm (1/4"), unbalanced: +8 dBV
Antenna Input: BNC-type, 50 ohms
Power Supply: 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply
Dimensions: 210.0 mm x 191.0 mm x 43.4 mm (W x D x H)
8.27" x 7.52" x 1.71" (W x D x H)
Weight: 1100 g (38.8 oz), without accessories
Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount Adapters
----------------------------------------------------------------------------------------------------------------
Echotone Music LLC is an experienced E-commerce Audio & Musical instrument dealer since 1998. We take pride in selling quality gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Items are well packed and shipped USPS, UPS or Pallet Freight Service. Items purchased on Friday may not ship until Monday or until the projected processing period. We are working hard to get your unit Built ( if needed), processed and shipped.
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.
Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches, scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees & accessories or your return may be subject to a return handling charge.
Refunds or for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, strings, reeds, computers, tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes & polishing cloths, software/soundware, books, CDs, DVD's, vinyl records, and videos.
Happy customers, that's music to our ears!
Tascam MODEL 12 All in One Digital Multitrack Mixer USB Audio Interface Recorder DAW Controller
The TASCAM Model 12 is a powerful production workstation and DAW control surface for music producers, content creators, live performers, and podcasters. At its core, Model 12 is a high-quality compact mixer, complete with premium Ultra HDDA (High Definition Discrete Architecture) microphone preamps, compressor and 3-band EQ on each channel, 3-band mastering EQ, and console-like routing capabilities. Beyond your DAW, Model 12 is also a standalone recorder that's ready to capture studio-quality multitrack audio directly to SD card. Connect to your computer and Model 12 becomes a powerful audio interface with comprehensive DAW control capabilities, giving you a tactile, hands-on mixing experience while you leave your mouse aside. Live performers will appreciate Model 12's built-in effects and routing flexibility, while podcasters will find crucial functions like mix-minus and a dedicated smartphone input. Whether you use it as a USB audio interface, DAW controller, standalone recorder, or as a standard mixing board, the TASCAM Model 12 is equipped to support your creative process.
The Model 12 is a compact multitrack recording studio, with the ability to record 12 tracks simultaneously at 24-bit/48kHz audio quality directly to SD card. With a built-in metronome, punch-in/out capability, and overdubbing functions, the Model 12 gives you the tools you need to produce a full band. You can also transfer your recordings directly to your computer via USB for further editing, processing, and mixing.
Model 12's comprehensive DAW control means you can ditch your mouse and mix your music like you would with a traditional mixing board. Navigating your session is easy with familiar transport controls, no need to remember key commands or grab your mouse when you need to move to a new song section. Hands-on control over your mix allows you to focus more on your music and less on menus, scrolling and clicking. If you want to make music in your DAW with the familiar feel of a mixing board, you'll be impressed with Model 12 as your DAW control surface.
Equipped with an onboard USB Type-C connector, the Model 12 is ready to connect to your DAW software for multitrack recording and playback. For comprehensive control over your DAW, Model 12 uses HUI/MCU protocol emulation to give you hands-on control over faders, mutes, pans, solos, record arm, play, record, stop, FF/Rew, and jog functions.
Whether you're recording or performing live, Model 12's dedicated click output helps you to stay in time. The Tap Tempo feature makes it easy to set your ideal tempo, and also allows you to sync Model 12's built-in delay effects to the tempo of your music. And for hands-free control over Tap Tempo, simply connect a non-latching footswitch (sold separately) to Model 12's footswitch input.
Model 12 makes it easy to create a seamless playback loop between two points in a song, with its VAMP Playback function. Loop your full arrangement for an extended solo or group jam, or loop the playback of only a selected track for creative emphasis. From practice and band rehearsal to live performance, VAMP Playback gives you a ton of freedom to extend your song's arrangement.
Model 12 is equipped with 5-pin MIDI In and Out ports to integrate your synthesizers and drum machines. You can also use MIDI to synchronize external effects processors with the tempo of your music, or allow your DAW software to operate in time with the Model 12.
The Model 12 is fully-equipped for podcasting and internet streaming. Podcasters will appreciate mix-minus functionality, as well as the dedicated smartphone input for external audio capture. You have plenty of microphone inputs for guests and additional performers, with dual headphone outputs available for monitoring. And with onboard Bluetooth, you can stream audio wirelessly to the Model 12. As a live streaming solution, Model 12 offers everything you need to sound your best.
When you're recording or streaming, it's crucial that your audio and video are in sync. Model 12's output delay function makes it easy to ensure stable sync between streamed audio and video. Output delay can be adjusted up to 2,000ms in 1ms increments, allowing you to sync with practically any camera or video mixer. And when you're streaming a live performance, you can apply the output delay to the USB audio stream while leaving the main XLR outputs unaffected.
With its studio-console-style design and workflow, Model 12 encourages hands-on creativity throughout your entire production process. Each channel offers a simple one-knob compressor for dynamics control, and 3-band EQ for tone shaping. The built-in effects section offers must- have effects like reverb, delay, chorus, and more, while pan controls and 60mm faders allow you to shape your mix fast. Once your mix is dialed in, use the Master Section EQ with sweepable mid band is ready to put the final polish on your stereo mix.
TASCAM's Ultra HDDA (High Definition Discrete Architecture) mic preamps boast an amazingly low noise floor and exceptional fidelity, making it easy to capture pro-level sound quality with practically any microphone. What's more, all of Model 12's channels are equipped with Hi-Z inputs for direct connection of guitars, basses, and other instruments. All inputs support line- level sources like keyboards and drum machines as well, giving you the flexibility you need to record practically any combination of sound sources.
Despite its compact size, Model 12 is packed with input options. On the rear panel you'll find eight XLR/TRS combo inputs (with +48V phantom power), with additional line inputs on channels 9 and 10 to accommodate stereo sound sources. The first two channels also offer insert points for integrating external sound processors into your workflow. There's a dedicated smartphone input (3.5mm TRRS) for playback from your portable devices, as well as onboard Bluetooth 5.0 for wireless audio streaming — perfect for playing some background music between live performances. In other words, Model 12 is well-equipped for practically any small-format recording or live production application.
Model 12 is equipped with dual headphone outputs, eliminating the need to split a headphone output for two people. Each headphone output can output its own discrete mix, allowing the engineer and performer to hear exactly what they need.
Features at a glance:
Key Features:
Loaded with inputs to accommodate practically any workflow, including 8 XLR mic inputs with phantom power, 8 Hi-Z instrument inputs, a total of 10 line inputs, Bluetooth 5.0, and 3.5mm TRRS smartphone input
Record up to 12 tracks simultaneously to SD card, with up to 10-track playback
Ready to serve as a 12-in/10-out audio interface for your DAW software (USB Type-C connector)
Ultra HDDA mic preamp technology captures rich, detailed audio with an ultra-low noise floor
Offers simple hands-on DAW control via HUI/MCU protocol emulation
Built-in effects section allows you to add studio-quality reverb, delay, chorus, and other effects
5-pin MIDI In/Out ports to synchronize with external MIDI-equipped devices like drum machines, sequencers, and effects modules
Other Features:
Dual headphone outputs support two discrete mixes
1-knob compressor and 3-band EQ on all input channels
Flexible routing capability with MAIN L-R and SUB L-R mix buses and dual Aux sends
Easily sync to video with adjustable output delay (0-2,000ms)
Selectable pre/post-fader modes and solo-in-place
Dual footswitch (TRS connector) support for hands-free control over transport, effects, and other functions
Convenient built-in metronome, with dedicated click output and Tap Tempo support
Optional carrying bag is available for ease of transport
Included Items:
Model 12 x1
AC adapter (TASCAM PS-M1524) x1
Power cord for AC adapter x1
USB cable (1m) x1
TRRS cable (1m) x1
Owner's Manual (including warranty)
System 20 PRO handheld microphone transmitter.
Features
Two antennas built into the transmitter
High sound quality (24-bit/48 kHz)
Compatible with NiMH batteries for all-day use
Slide-to-mute switch
OLED display
Specifications
Overall System
Operating Frequencies 2,402 to 2,480 MHz
Dynamic Range 120 dB (A-weighted), typical
Total Harmonic Distortion < 0.05%, typical
Maximum Simultaneous Use (recommended) Standard: 10 channels
HD mode: 20 channels
It depends on the region and environment.
System Frequency Response 20 to 20,000 Hz
Varies depending on the microphone to be installed.