Specialty Audio

Bogen DRZ120 6 Zone Music & Paging System w/ FM Tuner MP3 Mic & Line Inputs

The Bogen DRZ120 is a unique, self-contained 6-zone music and paging system for small- to medium-sized applications. It combines a digital FM tuner / MP3 player with seven (7) MIC & LINE inputs. It has a 120-watt amplifier capable of driving 4–16-ohm or 70-volt speaker systems. The DRZ120 permits connection of up to six individual paging and music zones. The DRZ120 also features Bass and Treble controls and a 5-segment LED output signal level indicator. The built-in FM tuner uses a PLL synthesizer to provide accurate frequency selection. MP3 audio can be played from files (.mp3 & .wav) accessed via the USB or SD card slots on the front panel. The MIC1 Input can be set for VOX-activated override/muting of the other audio inputs. Additionally, there is a push-button activated Chime feature that produces a short, melodic series of four ascending bell-like alert tones which are played across all outputs

Features:

Self-contained, 6-zone music and paging system with FM Tuner, MP3 Player, MIC and LINE inputs.

120-watt audio output (into 8-ohms)

For use with 4-16 ohm or 70-volt speaker systems.

Enable from 1-6 zones for music or paging

7 total audio inputs - MIC1-4, Line1-3

MIC1 input uses a front 1/4” TRS connector for a balanced Lo-Z microphone

MIC1 VOX-activated muting of all other audio inputs governed via a MUTE Control

RCA inputs for LINE1-3

Built-in digital FM Tuner, with PLL synthesizer to provide accurate frequency selection

Auto station search and manual tuning

Back-lit tuner display, LCD

FM 75Ω coaxial antenna connector

Over 800 FM station presets

Bass and Treble controls

Infrared Remote Controller for FM tuner and MP3 player control:

-Volume control

-TUNER/MP3 select button

-Preset and scan channel selection

-USB/SD media select

-MP3 play/pause/forward/ backward/repeat options

-EQ mode selection (none, Classic, Jazz, Rock, Bass & Pop)

Chime button with priority output

5-segment LED output level meter

AUX post-mix LINE output

Power-on LED indicator

Rack-mountable with integral brackets

Listed to UL Standard 60065 for U.S. and Canada

FCC Part 15 compliant

Operates from nominal 120V AC, 60 Hz

Included Accessories:

21-Button Remote Control

5 ft. Male-to-Male RCA Phono Cables

5 ft. 75-Ohm Wire FM Antenna

Two (2) 3-Terminal Pluggable Euro-Block Connectors

Four (4) Rubber Feet/Stand-offs with mounting screws

Specifications:

Amplifier

Power Rating (RMS): 120 watts into 8-ohms

Distortion: < 1% Rated output power @ 1 kHz

Signal to Noise Ratio: LINE: ≥ -74dB

Audio Frequency Response: 80 Hz - 16 kHz @ 4Ω (+/-3dB)

Zone Outputs:   120 watts @70V max. for any single zone, or

20 watts @70V max. for each zone (assuming equal loads)

AUX Speaker Output: 4-16Ω

Tone Controls:  Bass: +/-10 dB @ 100 Hz

Treble: +/-10 dB @ 10 kHz

Microphone Inputs:      ≤ 3mV/1kΩ balanced (Front 1/4” TRS, Rear XLR,

Rear Euro-Block x2)

MIC1 Precedence: VOX-activated, with adjustable MUTE Control

LINE Inputs: ≤ 300mV/10kΩ unbalanced; RCA jacks

AUX Line Output: 50Ω/(1V); RCA jacks

Tuner

Station Tuning: Digital, with PLL Synthesizer

Band Coverage: FM: 87.5 to 108 MHz

Antenna: 75Ω coaxial

Preset Memory: Over 800 FM stations

Memory Scan: Automatically presets stations

Channel Indicator: Back-lit, LCD

Power/Dimension

Power Required: 120V AC nominal @ 60 Hz

Power Consumption: 250W

Overall Dimensions: 19-1/8" W x 3-1/2" H x 13-3/4" D

Product Weight: 25.2 lbs.

Bogen DDU250 16" Dynamic Gooseneck Desktop Microphone Push Talk and Lock

The Bogen DDU250 is a high-quality, dynamic, uni-directional, gooseneck desktop microphone ideal for any podium or PA system. It features a 16" long, fully flexible gooseneck stalk that is shock-mounted to a heavy zinc die cast base, a unidirectional pickup pattern, and a 10-foot cable with external contact closure outputs for the talk switches. The gooseneck permits the user to adjust the microphone’s angle and height to suit the user’s needs. Other features include a push-to-talk switch for momentary paging and a push-to-lock switch for continuous audio.

Features:
Cardioid pickup pattern
16" long, fully flexible gooseneck stalk that is shock-mounted to a heavy zinc die cast base
Push-to-lock and push-to-talk switches
10-foot cable with external contact closure outputs for the talk switches
Excellent speech intelligibility with low ambient noise
Effective feedback control
Low sensitivity to breath and popping sound
Slim, compact design to minimize distraction to the user

Specifications:
MIC Type: Desktop
Element: Moving coil dynamic
Polar Pattern: Cardioid
Impedance: 500-ohm
Frequency Response: 100 Hz to 12 kHz
Sensitivity*: -76 dB +/- 3dB
S/N Ratio: >65 dB
Cable: 10 ft., 4-conductor, 2-shielded
Switches: Push-to-lock and push-to-talk
Dimensions: 4-1/4" W x 18-1/4" H x 6-1/4" D
Product Weight: 3-1/2 lb.
Material: Zinc die cast
Finish: Matte black

Bogen VAR1 Voice Activated Relay for 70V Paging System 2 Sets of C Form

The VAR1 is a relay device that monitors audio activity over a wide range of input voltages and operates two sets of C-Form relay contacts in response to detected activity. The VAR1 can be used to detect voltages as low as signals directly from a microphone or as high as signals from 70V speaker systems. A low-level output of the detected audio, transformer-isolated from the input, is also made available for use with other equipment. The VAR1 can also be used as a balanced, low-impedance microphone pre-amp. The VAR1 is ideally suited to provide a set of contact closures for paging ports of lower cost telephone systems that do not have a set of AUX contacts to trigger paging equipment. An adjustable release delay (up to 25 seconds) keeps the paging system from dropping out in the middle of a page.

Features:
Monitors audio activity over a wide range of input voltages
Two sets of C-Form (both N.O. and N. C.) relay contacts respond to audio activity
Four levels of signals: microphone, 600-ohm line, 25V, and 70V speaker systems
Built-in balanced, low noise, high gain microphone pre-amp
Transformer-isolated, 600-ohm small signal level output of detected audio available
Works with self-amplified or central-amplified paging systems
Separate microphone pre-amp gain control
Adjustable release delay: 0.25s to 25s
Trigger threshold adjustment
Relay active indicator light
Accessories: PRS40C 12V DC Power Supply (sold separately)

Specifications:
LINE INPUT
Impedance: 600 ohms
Frequency Response: 100 Hz to 10 kHz
70V Input Impedance: 200k ohms
Output Level: 400 mVrms
25V Input Impedance: 75k ohms
Output Level: 420 mVrms
MIC PRE-AMP
Gain: 62 dB
Sensitivity: 750 microvolts, rms for 1Vrms out
Distortion: < 2%
Frequency Response: 200 Hz to 10 kHz
Output Signal-to-Noise Ratio: 55 dB
GENERAL
VOX Sensitivity: 20 mV to 150 mVrms @ 600 ohms Line input
Time Delay Range (approx.): 0.25 to 25 sec.
Relay Contact Rating: 2A/30V DC, 0.5A/120V AC
Power Requirements: External 12V to 24V DC @ 100mA (sold separately)
Dimensions: 5-3/8" W × 3-7/8" H × 1-3/8" D
Product Weight: 1 lb.

Adaptive Technologies AJ-2336-BT Adjustable Width Wall & Ceiling Speaker Mount

Adjustable Loudspeaker Mounting Kits support most of the mountable loudspeakers in the 85 lbs./38 kg. range, or less and its open side arm slots allow a single installer to easily mount loudspeakers in this weight range. Loudspeakers can be rotated within the arms to acquire the desired tilt angle. Separate side holes permit the angle of the speaker to be locked permanently using lag bolts. Since there are only two sizes, inventory requirements are minimal.

Fully captive arm holes permit safe, secure mounting of loudspeakers under balconies, overhangs and from ceilings. The brackets’ base gives installers multiple options for placing speakers over irregular and unpredictable mounting surfaces because of its unique mounting slot pattern.

Features:

• Packed in pairs

• Two models support most loudspeakers, weighs 85 lbs/36 kg. or less

• Compatible with EAW – MK2300i Series

• 16” and 24” hole centers match wall studs.

• Open arm slots for one man installation.

• Sound isolation gaskets block sound

• transmission through walls.

• Permanent angle set capable.

Specifications:
Material: Structural Steel Alloy
Down Tilt: Up to 60 degrees
Finish: Powder Coat
Color: Black
WLL: 85 lbs/38.6 Kg
Design Factor: 7:1 ratio
Includes an assortment of 1/4”, 5/16” and 3/8” bolts and hardware plus two 1/4” thick sound isolation gaskets.

Adaptive Technologies PM-24-6DOWN-G Standard Outdoor Pole Mounts w/ 20" Band Kit

The UniFrame is a complete mounting solution for outdoor loudspeakers. Its design combines the attributes of the PoleStar® stainless “a-lacarte” version into just two models produced in steel and then galvanized to an outdoor weather rating.

This single speaker pole mount reduces the amount of parts required for the job site and saves installation time by combining the support arm and the pole adapter together into one assembly. In addition, two stainless steel band kits are included, which only require a socket set to assemble.

The support arm is welded together for extra strength and durability. Each arm includes three attach point mounting holes at the end of the arm that allow the installer to select the desired distance between the loudspeaker and the pole.

Features:

• Uni-Frame assembly adds strength and reduces installation time.

• Longer pole interface increases structural capacity.

• Rugged outdoor galvanized finish to ASTM A123 an

• ISO1461 specifications.

• Three arm mounting points to accommodate all speaker models.

• Angled brace increases structural stability during severe

• weather conditions.

• Support arm may be oriented up or down for installation flexibility.

• Dual adapter may be secured to the Uni-Frame for a three-way installation.

Specifications:
Material: Steel Alloy
Finish: Galvanized
Color: Silver
WLL: 190 lb / 86.4 Kg single speaker
Design Factor: 10:1 ratio
*WLL = Working Load Limit

Adaptive Technologies PM-SAFETY-6DOWN Pole Bracket Galvanized Safety Anchor

When the pole or column does not offer an adequate way to attach safety cables, specify the PM-Safety-6Down and corresponding band kit. This mount provides a structural method for anchoring safety cables. It installs above the pole adapter and safety cables are then secured to the safety anchor and each loudspeaker, thus by-passing the pole adapter completely.

Features:

• Mounts to round surfaces including poles and columns

• Galvanized

• Load rated components

• Components use common hole patterns

• Cosmetic trim components included

• Job-site ready

Specifications:
Galvanized Steel Alloy
Galvanized Passivated
WLL: 300lb / 136.078

Adaptive Technologies PM-MOUNT-6UP 6” Marine Grade Pole Adapter Speaker Mount

For 6”/154mm diameter and larger poles and columns, use the PM-Mount-6UP. This all-stainless adapter offers a natural finish and supports up to 300 lb./68 Kg, in a vertical load with a 5:1 design factor. It accommodates the PM Series Support Arm, Dual Adapter and includes hardware for their attachment. There are four standard permanent band kits available in different lengths and are sold separately. Custom lengths are also available

Features:

• Mounts to round surfaces including poles and columns

• All stainless steel construction

• Load rated components

• Components use common hole patterns

• Cosmetic trim components included

• Job-site ready

Specifications:
Stainless Steel
Natural Passivated

Adaptive Technologies BC3-8-0 3" to 8" Open Hang Point Channel Style Beam Clamp

Use the BC3-8 channel style beam clamp to provide a load rated overhead rigging point from structural I-Beams with flange widths ranging between 3” and 8” (76-203 mm). This beam clamp model provides a fast, easy and safe way to rig direct loads from overhead and a hand wrench is all that is required to secure this clamp.

Features:

• Single center hang points for 1/2″ to 5/8″ dia. threaded rod.

• Provides safe load-rated hang points

• Clamps securely to beam flanges ranging from 3″ – 8″

Specifications:
Material: All Steel Components
Width:(BC20-26-2) 20” to 26”
WLL:2100 lbs / 953 Kg.
Finish: Powder Coat
Color: Black
Design Factor: 5:1
Shipping Weight: 3.2 lbs / 1.45 Kg.
1 pc 3”-8” Beam Clamp Channel
2 pcs Locking Angle Plate.
2 pcs Flat Washer, 5/8”
2 pcs Nyloc Nut, 5/8-11

Adaptive Technologies MM-024-BT MultiMount 60lb Pan and Tilt Speaker Wall Mount

The MultiMount MM-024 Indoor Speaker Wall Mount supports loudspeakers weighing up to 60 lbs. in a vertical orientation, quickly attaching them to walls and other vertical structures. Speakers are independently aimed and locked in almost any direction or angle through the use of independent pan, tilt, and swivel adjustments.

The MultiMount MM-024 Indoor Speaker Wall Mount s unique telescoping arm acts as a convenient carrying handle to lift speakers into place then inserts into the wall mounting plate. Once inserted, the mounting plate supports the weight of the speaker leaving the installers hands free to complete the wiring and positioning process.

Tilt adjustments are made at the side of the speaker adapter plate. Panning adjustments are made at the mounting plate and a third rotation is available between the speaker and the support arm.

Features:

• Weather resistant for covered outdoor and indoor use

• Independent, no drift, pan and tilt controls

• Infinite locking adjustments

• No lock memory – no drift

• Single man speaker installations

• Optional safety cables available

• Conforms to multiple mounting hole patterns

• Including 2 x 4-1/4 and 2-3/4 x 5

Material: Structural Steel Alloy
Finish:Powder Coat
Color: Black
Tilt Rotation: 180° max.
Swivel Rotation: 140° max.
WLL: 60 lbs. (27.2 Kg) max.
Design Factor: 10:1 ratio
Net WGT: 4 lbs. (1.8 Kg) each
Shipping WGT: 5 lbs. (2.3 Kg) each
1 pc Hardware Kit
1 pc Support Arm Assy
1 pc Speaker Adapter
1 pc Mounting Plate

Adaptive Technologies MM-3RDX-18 60lb Adjustable Ceiling Speaker Mount

The MM-3RDX-18 is an adjustable ceiling speaker mount that provides pan, tilt & roll adjustments. It supports and aims speakers that are equipped with either the 2 X4-1/4 or the 2-3/4” X 5” 4-point mounting pattern.

This model aims speakers from overhead by way of a variety of tube extensions and ceiling attachments. Ceiling speakers achieve up to 360 degrees of horizontal pan angle, up to 180 degrees of tilt angle and 180 degrees of roll adjustment.

Tilt adjustments are made at the side of the speaker adapter plate, Pan-adjustments are made at the tube extension coupler and the roll feature is adjusted between the mount and the tube extension. The MM-3RDX-18 tube coupler provides a pathway for signal wire and a safety cable to pass through the tube extension to the terminal block. This makes for a clean, safe and predictable method for installing and aiming ceiling speakers.

Features:

• Weather resistant for covered outdoor and indoor use

• Indicators let installers set angles accurately

• Independent pan, tilt & roll aiming gets

• perfect sound coverage

• Adapts to standard schedule-40 ½” pipe

• Independent No drift, No memory Locking

• Works for speakers with 2 X 4-1/4 and

• 2-3/4X 5 Hole Patterns

Specifications:
Material: Structural Steel Alloy
Finish: Powder Coat
Tilt Rotation: +/-90 degrees max
Pan Rotation: 360 degrees
Color: Black
WLL: 60 lbs. (27.2 Kg) max.
Design Factor: 7:1 ratio
Net WGT: 5 lbs. (2.3 Kg.) each
Shipping WGT: 6 lbs. (2.7 Kg.) each
Pack Count: 1 unit/carton
1 pc 3-axis mount

Adaptive Technologies AJ-1524-BT 60lb Adjustable Wall & Ceiling Speaker Mount

**Sold in pairs only so you must order in quantities of 2 only **

Adjustable Loudspeaker Mounting Kits support most of the mountable loudspeakers in the 60 lbs./22 kg. range, or less and its open side arm slots allow a single installer to easily mount loudspeakers in this weight range. Loudspeakers can be rotated within the arms to acquire the desired tilt angle. Separate side holes permit the angle of the speaker to be locked permanently using lag bolts. Since there are only two sizes, inventory requirements are minimal.

Fully captive arm holes permit safe, secure mounting of loudspeakers under balconies, overhangs and from ceilings. The brackets’ base gives installers multiple options for placing speakers over irregular and unpredictable mounting surfaces because of its unique mounting slot pattern.

Features:

• Two models support most loudspeakers, weighs 60 lbs/27 kg. or less

• 16” and 24” hole centers match wall studs

• Open arm slots for one man installation

• Sound isolation gaskets block sound transmission through walls

• Permanent angle set capable.

Specifications:
Material: Structural Steel Alloy
Down Tilt: Up to 60 degrees
Finish: Powder Coat
Color: Black
WLL: 60 lbs/27 Kg
Design Factor: 7:1 ratio
Includes an assortment of 1/4”, 5/16” and 3/8” bolts and hardware plus two 1/4” thick sound isolation gaskets.

Adaptive Technologies PM-DA-48 48" Marine Grade Dual Speaker Adapter Pole Mount

The Dual Adapter is an innovative way to mount and aim two loudspeakers and other objects (of equal weight and mass) from the same Pole or column. A variety of available mounting holes permit speakers to be installed closer or further from the pole to provide clearance for different down tilt angles. The Dual Adapter is produced from stainless steel in a natural finish and supports up to the stated maximum working load of the pole adapter . Decorative end caps provide a finished look and hardware is included to secure it to the pole adapter and/or support arm. Yokes and U-Brackets are not included.

Features:

• Mounts to round surfaces including poles and columns

• All stainless steel construction

• Load rated components

• Components use common hole patterns

• Cosmetic trim components included

• Job-site ready

• Stainless Steel

• Natural Passivated

Adaptive Technologies Group CC-096 Wire Rope Tilt Cable Coupler Kit for Speaker

The Steerables® Pull back and coupler cable kit serves as a pullback and coupling device for flyable loudspeakers and can be used in a wide range of rigging applications. It provides an easy and infinitely adjustable feature for loudspeakers and other objects weighing up to 220 lbs/134 kg.

SPECIFICATIONS
• Material: Stainless Steel
• 1 pc. 8 foot stainless wire rope
• Color: Black
• 2 pc. 4 inch tie wrap
• WLL: 220 lbs./99.8 kg.
• 2 pc. 1/4 inch shackles
• Length: 8inch/99mm
• 1 pc. Clutch lock mechanism
• 1 pc. 3/8 inch eyenut

Adaptive Technologies Group SAS-100-CM Steerables Ceiling Mount for Loudspeaker

The Steerables® Ceiling Mount, SAS-100-CM, suspends and aims loudspeakers and other objects weighing up to 100 lbs/45 Kg up close to ceiling and other overhead surfaces.

This design is ideal for applications where cabinets equipped with suspension points need to be suspended and aimed, close but out of reach of the audience. Typical applications include churches, schools, gymnasiums, auditoriums, theme parks, nightclubs, bars and restaurants.

Loudspeaker cabinets equipped with suspension or mounting points can be easily mounted and aimed from ceilings and other structurally secure overhead structures with unprecedented ease of installation and precise adjustments.

FEATURES:
• Suspends and aims flyable and mountable loudspeakers
• Secures to ceiling and other overhead structures using standard schedule 40, 1-1/2″ diameter pipe.
• More headroom keeps cabinets out of reach
• Unique cross arm steering mechanism offers 360° of pan control
• Significant reductions in installation and planning time
• Adapts to standard Adaptive U-Series mounts and Steerables® Tilt Cable Kits

SPECIIFCATIONS:
• Material: Structural Steel Alloy
• 1 pc. Ceiling Plate
• Finish: Powder Coat
• 1 pc. 1-1/2″ Connector Tube
• Color: Black
• 1 pc. Cross Arm
• Pan Rotation: 360° horizontal swivel max.
• 1 pc. Hardware Kit
• Working Load Limit: 100 lbs./45 kg.
• Design Factor: 10:1 ratio based on ultimate yield point
• Net Weight: 11.5 lbs./5.2 Kg.
• Shipping Weight: 12.5 lbs./5.7 Kg
• Pack Count: 1/carton
• Hardware for mounting to the ceiling structure is not included.
• Tilt mechanism is ordered separately.

The built-in hanger on the back of our DT8000 Guitar Stool provides a safe, convenient place for guitarists to store their guitar between sets. An extra-thick padded seat cushion boosts comfort and reduces fatigue. Nonslip rubber feet on all four legs increase stability and ensure the stool stays in place while protecting the floor from scratches. For efficient storage and transportation, the stool folds down.

4 non-slip rubber feet prevent slippage and damaged floors
All in one guitar stool & stand
Extra thick padded cushion for maximum comfort
Folds for easy, compact transportation and storage
Guitar hanger on back to conveniently store guitar between sets

Product Properties
2nd Tier Weight Capacity
200 lbs.
Application
Guitar stool / stand
Back Rest to Front of Cushion
12" - 15" (adjustable)
Base Spread
14.75" (W) x 22.25" (D)
Color
Black
Height (floor to cushion)
27"
Height (total)
39"
Material
Steel
Seat Dimensions
15.75" x 12" x 2

On-Stage WS7700B Large Workstation Studio Desk Rack and Keyboard Stand

Get more done with our WS7700 Workstation. This sturdy desk has a place for computers, studio monitors, MIDI controllers, rackmount components, and recording and mixing equipment, making it easy to keep gear organized and ready to use. A slide-out keyboard tray and an elevated platform for a monitor and speakers increase work space and enhance operating comfort. In addition to a spacious desktop that supports a wide range of mixers and keyboard instruments, two 3U shallow racks provide a space for rackmount components totaling 6U. To top off this efficient and orderly setup, a mobile device slot-stand and two computer holders keep delicate electronics safe and conveniently within reach.

Features:
• Center shelf keeps tools and other small accessories within easy reach, mobile device slot holder props up phones and tablets for hands-free viewing
• Dual 3U shallow racks provide space to securely mount rack components totaling 6U
• Ergonomic setup for a computer, monitor speakers, MIDI controller, rack gear, and other studio equipment
• Heavy-duty Z-frame base provides a stable foundation for reliable gear support
• Main worksurface provides plenty of space for mixers and keyboard instruments
• Sliding tray keeps the computer keyboard or a small MIDI controller at a comfortable level and slides under the main worksurface for convenient storage
• Two computer holders keep Mac and Windows desktop towers safe and off the floor
• Vents in the computer holders promote airflow to help keep computers cool

Specifications:
• Application: Recording/Mixing Desk
• Color: Black
• Computer Holder Dimensions: 9.25" (L) x 12" (D) x 28" (H)
• Construction: MDF &amp; Steel, Wood &amp; Steel
• Dimensions: 56" (L) x 32" (D) x 38" (H)
• Keyboard Tray Dimensions: 27" x 15"
• Main Work Surface Overall Dimensions: 56" (L) x 26" (D)
• Main Work Surface Usable Dimensions: 56" (L) x 17" (D)
• Main Worksurface Dimensions: 56" (L) x 26" (D)
• Rack Depth: 9.5"
• Rack Width: 19"
• Total Rack Space: 6U (3U left + 3U right), 6U Shallow (3U left + 3U right)
• Upper Work Surface Dimensions: 53" (L) x 17" (D)
• Upper Worksurface Dimensions: 53" (L) x 17" (D)
• Weight Capacity: 175 lb

On-Stage WS7500W Workstation Studio Desk with Keyboard Tray White

Our WS7500W Workstation provides a sturdy, professional-looking foundation for a home studio's computer, MIDI controller, and mixing gear. With an elevated monitor platform, a spacious desktop, and a slide-out keyboard tray, its ergonomic configuration maximizes work space and operating comfort.

The On-Stage WS7500W Workstation Studio Desk combines modern aesthetics with practical functionality, making it an essential centerpiece for any creative workspace. Designed to meet the demands of musicians, producers, and creators, this desk delivers style, durability, and ergonomic convenience.

Features:
• Desktop provides plenty of space for mixing gear, synths, and MIDI controllers
• Ergonomic setup for a computer, mixing monitors, and other studio equipment
• Heavy-duty Z-frame base provides a stable foundation for reliable gear support
• Tray keeps the keyboard within reach and slides under the desktop when not in use

Specifications:
• Application: Workstation
• Color: White and black
• Construction: Wood and Steel
• Desktop Height: 29"
• Dimensions: 43" wide x 38" High x 32.5" Deep
• Keyboard Tray Dimensions: 15" x 27"
• Keyboard Tray Height: 25"
• Main Surface Dimensions: 24" x 43"
• Upper Platform Dimensions: 17" x 39"
• Upper Platform Height: 37.5"
• Weight Capacity: 175 lbs.

On-Stage LS7730 Lighting Stand with Truss Adjustable Height

An efficient, secure way to erect and dismantle portable lighting, our LS7730 Lighting Stand with Truss adjusts in height up to 10.75', providing support for tall, complex lighting configurations. The center truss mounts eight PAR cans while two T-bars each mount four PAR cans, and hardware is included for mounting all 16 fixtures. Two stands with wide bases and nonslip feet provide exceptional stability and load balance for reliable performance even on irregular surfaces. For convenient, compact storage and transportation the light bars and truss sections detach and the tripod bases fold flat.

Features:
• Center truss mounts eight PAR cans while two T-bars each mount four PAR cans
• Hardware is included for properly mounting all 16 fixtures
• Height adjusts 65"–129" to support tall, complex lighting configurations
• Height settings are reinforced with a locking pin for reliable lighting support

Specifications:
• Application: 16 Par Lighting Stand with Truss
• Base Spread: 48"
• Color: Black
• Construction: Aluminum
• Height Adj.: 65" - 129"
• Length: 120"
• Product Type: Lighting Stand
• Truss Height: 11"
• Weight Capacity: 200 lbs total

On-Stage UTC5500 All Terrain Utility Cart Adjustable Bed

Capitalizing on large treaded wheels and a heavy-duty frame, our UTC5500 All-Terrain Utility Cart lives up to its name. This burly cart hauls 550 lb of gear in a single trip over rough or uneven surfaces including grass, gravel, dirt, and debris. The versatile bed expands to make room for large loads and it contracts to negotiate tight spaces. Ergonomically positioned handles at each end facilitate comfortable pushing, pulling, and steering by one person or by multiple people. The handles also fold flat against the bed to clear the way for oversized gear. While this capable cart is rugged and agile, it is also geared toward safety. Locking casters keep the cart from rolling during loading and unloading. Plus, eyelets on the frame provide anchor points for straps to secure equipment. And, despite its brawn, the cart folds into a compact configuration to make efficient use of storage space.

Features:
• Bed size adjusts to take on large loads or fit through tight spaces
• Handles can lie flat against the bed to clear the way for oversized gear
• Large treaded wheels tackle uneven terrain and the front wheels rotate 360° for ease of steering
• Safely hauls 550 lb of heavy gear to reduce load-in and load-out times

Specifications:
• Application: Gear transportation
• Compact Size: (L) 30" x (W) 13.5, (L) 30" x (W) 13.5", 30" x 13.6" x 11.2"
• Extended Size: (L) 52" x (W) 13.5", 52" x 13.6" x 37"
• Front Wheel: 8"
• Handle Height: 37"
• Platform Bed Height: 11", 11.
• Rear Wheel: 10"
• Weight: 34.6 lb
• Weight Capacity: 550 lbs, 550 lbs.

On-Stage KB9503B Adjustable Piano Bench Hydraulic Seat Black Gloss

Find your optimal playing position with our KB9503B Height-Adjustable Piano Bench featuring easy-to-reach levers that enable hydraulic-assisted height adjustments. The premium tufted cushion combines exceptional comfort and support with a professional and elegant appearance. The thick legs and wide feet deliver outstanding balance and stability.

Features:
• Bed size adjusts to take on large loads or fit through tight spaces
• Elegant design complements the appearance of a piano or keyboard
• Hydraulic assistance for ease of height adjustments
• Premium tufted cushion delivers long-lasting playing comfort

Specifications:
• Application: Piano bench
• Color: Black gloss
• Height Adj. - 17" - 22"
• Weight Capacity - 330 lbs.

On-Stage RKD1200 12U Wall Mount Rack Steel Knock Down Cabinet Black

Protect and organize your rack-mount components by mounting them in the sturdy RKD1200 12U Wall-Mount Knock-Down Rack. The built-in rails accept standard #10-32 rack screws and there's room inside for 12U of standard 19-inch audio rack gear. This enclosed rack cabinet not only keeps gear safely inside but it also keeps unwanted intruders out. And that's not the only way it safeguards your gear. Eight vents on the top, front, and sides promote proper airflow to ensure that your equipment doesn't overheat. A lockable front door and two lockable removable panels on the sides enable you to easily access the front and rear of your devices to run cables and adjust settings. The side panels feature spring-loaded releases that hold them in place, leaving it up to you whether you'd like to lock them or not. For ease of setup and installation, the rear panel is also removable via four screws. Perforated port knockouts on the top and rear panels let you decide how many openings you need for your particular cable and antenna system. If you don't knock them out, they'll remain closed for maximum equipment enclosure. Keyhole hangers on the rear panel enable stable mounting of the rack on a wall, perfect for commercial sound installations, conference rooms, and recording studios. Optional feet are included if you wish to place the rack on a desk, workstation, or shelf. Or, if you find that you need to move your rack frequently, optional casters can be purchased separately. When the rack is parked for storage, presentations, performance, or recording, locks on the casters keep it firmly and safely in place. The case is constructed of steel for strength and stability to ensure reliable support for your equipment. Durably finished in classic black, the rack looks great, resists chips and scratches, and blends into your conference, livestream, stage, or studio setup to add to a professional presentation. When not in use, the frame can be disassembled for compact storage and efficient transportation.

Features:
• Doors and removable panels lock to keep your gear safe.
• Easy for you to mount on a wall.
• Ensures proper airflow to safeguard your equipment against overheating.
• Flat packed for efficient shipping.
• Lets you decide how many openings you need for your cables and antennas.
• Provides you with easy access to the front and rear of your devices.
• Secures and protects 12U of your rack-mount audio components.

Specifications:
• Construction: Steel
• Depth: 17.72"
• Finish: Black Powder Coating
• Height: 24.41"
• Length: 21.65"
• Rack Mounting Holes: #10-32
• Rack Space: 12U
• Usable Depth (Rail to Rail): 14"

On-Stage SMC5000 Music Stand Cart Holds 10 Stands Compact Black

Sturdy and easy to maneuver, our SMC5000 Music Stand Cart holds eight to ten music stands. The chassis features a compact footprint for space-saving storage and a tight turning radius that enables agile transportation. Padding on the handles enhances grip and comfort while treaded nonslip wheels facilitate precise steering and traction.

Features:
• Compact turning radius for agility when rounding corners or navigating tight spaces
• Efficient transportation and storage for up to 10 music stands
• Padding on the handles enhances grip and comfort
• Small footprint conserves storage space

Specifications:
• Application: 8 Music stands
• Color: Black
• Footprint: 24.5" x 21.75"
• Height Adjustments: 27.25", 29", 30.5", 32", 33.5"
• Height Adjustments (high point of support bar): 77.5", 79", 80.5", 82", 83.5"
• Height Adjustments (low point of support bar): 27.5", 29", 30.5", 32", 33.5"
• Weight Capacity: 45 lbs., 66 lbs.

On-Stage RKD9000 9U Wall Mount Rack Audio Gear Storage Black

Protect and organize your rack-mount components by mounting them in the sturdy RKD9000 9U Wall-Mount Knock-Down Rack. The built-in rails accept standard #10-32 rack screws and there's room inside for 9U of standard 19-inch audio rack gear. This enclosed rack cabinet not only keeps gear safely inside but it also keeps unwanted intruders out. And that's not the only way it safeguards your gear. Eight vents on the top, front, and sides promote proper airflow to ensure that your equipment doesn't overheat. A lockable front door and two lockable removable panels on the sides enable you to easily access the front and rear of your devices to run cables and adjust settings. The side panels feature spring-loaded releases that hold them in place, leaving it up to you whether you'd like to lock them or not. For ease of setup and installation, the rear panel is also removable via four screws. Perforated port knockouts on the top and rear panels let you decide how many openings you need for your particular cable and antenna system. If you don't knock them out, they'll remain closed for maximum equipment enclosure. Keyhole hangers on the rear panel enable stable mounting of the rack on a wall, perfect for commercial sound installations, conference rooms, and recording studios. Optional feet are included if you wish to place the rack on a desk, workstation, or shelf. Or, if you find that you need to move your rack frequently, optional casters can be purchased separately. When the rack is parked for storage, presentations, performance, or recording, locks on the casters keep it firmly and safely in place. The case is constructed of steel for strength and stability to ensure reliable support for your equipment. Durably finished in classic black, the rack looks great, resists chips and scratches, and blends into your conference, livestream, stage, or studio setup to add to a professional presentation. When not in use, the frame can be disassembled for compact storage and efficient transportation.

Features:
• Doors and removable panels lock to keep your gear safe.
• Easy for you to mount on a wall.
• Ensures proper airflow to safeguard your equipment against overheating.
• Flat packed for efficient shipping.
• Lets you decide how many openings you need for your cables and antennas.
• Provides you with easy access to the front and rear of your devices.
• Secures and protects 9U of your rack-mount audio components.

Specifications:
• Construction: Steel
• Depth: 17.72"
• Finish: Black Powder Coating
• Height: 19.85"
• Length: 21.65"
• Rack Mounting Holes: #10-32
• Rack Space: 9U
• Usable Depth (Rail to Rail): 14"

On-Stage LS7805QIK Power Crank Up Lighting Stand with Clamp Arms

An efficient way to erect and dismantle sturdy portable lighting, our LS7805QIK Power Crank-Up Lighting Stand adjusts in height up to 11', providing support for tall, complex lighting configurations. For ergonomic set up and teardown, this stand raises and lowers heavy light rigs via a crank system that can be operated manually or with the aid of a power drill. The u-mount Lighting Arms can be positioned up, down, and around the stand in unlimited configurations and the braceless design leaves unobstructed space for mounting PAR cans. The top T-bar mounts six PAR cans while the two side bars each mount three PAR cans, and hardware is included for mounting all 12 fixtures. The wide base with nonslip feet provides exceptional stability and load balance for reliable performance even on irregular surfaces. To facilitate storage and transportation, the light bars detach and the tripod base folds flat.

Features:
• Crank can be operated manually or with the aid of a power drill for extra assistance
• Crank handle folds down when not in use
• Crank system supplies leverage for safely raising and lowering lighting
• Efficient clamp-on lighting arms reduce set up and teardown time

Specifications:
• Application: 12 Par Lighting Stand
• Base Spread: 54"
• Color: Black
• Construction: Aluminum and steel
• Height Adj.: 54" - 132"
• Weight Capacity: 80 lbs.

On-Stage RKD6000 6U Wall Mount Rack Cabinet Locking Doors Black

Protect and organize your rack-mount components by mounting them in the sturdy RKD6000 6U Wall-Mount Knock-Down Rack. The built-in rails accept standard #10-32 rack screws and there's room inside for 6U of standard 19-inch audio rack gear. This enclosed rack cabinet not only keeps gear safely inside but it also keeps unwanted intruders out. And that's not the only way it safeguards your gear. Eight vents on the top, front, and sides promote proper airflow to ensure that your equipment doesn't overheat. A lockable front door and two lockable removable panels on the sides enable you to easily access the front and rear of your devices to run cables and adjust settings. The side panels feature spring-loaded releases that hold them in place, leaving it up to you whether you'd like to lock them or not. For ease of setup and installation, the rear panel is also removable via four screws. Perforated port knockouts on the top and rear panels let you decide how many openings you need for your particular cable and antenna system. If you don't knock them out, they'll remain closed for maximum equipment enclosure. Keyhole hangers on the rear panel enable stable mounting of the rack on a wall, perfect for commercial sound installations, conference rooms, and recording studios. Optional feet are included if you wish to place the rack on a desk, workstation, or shelf. Or, if you find that you need to move your rack frequently, optional casters can be purchased separately. When the rack is parked for storage, presentations, performance, or recording, locks on the casters keep it firmly and safely in place. The case is constructed of steel for strength and stability to ensure reliable support for your equipment. Durably finished in classic black, the rack looks great, resists chips and scratches, and blends into your conference, livestream, stage, or studio setup to add to a professional presentation. When not in use, the frame can be disassembled for compact storage and efficient transportation.

Features:
• Doors and removable panels lock to keep your gear safe.
• Easy for you to mount on a wall.
• Ensures proper airflow to safeguard your equipment against overheating.
• Flat packed for efficient shipping.
• Lets you decide how many openings you need for your cables and antennas.
• Provides you with easy access to the front and rear of your devices.
• Secures and protects 6U of your rack-mount audio components.

Specifications:
• Construction: Steel
• Depth: 17.72"
• Finish: Black Powder Coating
• Height: 14.57"
• Length: 21.65"
• Rack Mounting Holes: #10-32
• Rack Space: 6U
• Usable Depth (Rail to Rail): 14"

On-Stage DRS9000 Snare Drum Rack Adjustable Stand

Securely store up to five snare drums and create an attractive drum display with our DRS9000 Snare Drum Rack. Five pairs of support arms made of heavy-duty steel each hold up 18 lb to ensure reliable equipment support. The horizontal space between the support arms adjusts to safely hold any size drum up to 16" in diameter. The vertical space between the crossbars adjusts to fit various snare heights to accommodate a wide range of drum combinations. Squeeze-to-release handles enable efficient positioning of the support arms, making easy to add new drums or change the order of an existing drum collection. Unused crossbars and support arms can be removed for a clean, organized look and reattached as needed. Rubber sleeves and end caps on each support arm protect drum finishes and stabilize the drums to prevent rattling and ringing. Two smooth-rolling casters and a handlebar provide handcart-style mobility for ease of relocating the rack.

Features:
• 22 height adjustment slots enable many configurations to accommodate a wide range of snare collections
• Casters and a handlebar provide handcart-style mobility for ease of relocating the rack
• Rubber sleeves and end caps on the support arms stabilize drums to prevent ringing and rattling
• Securely stores and provides convenient access to five snare drums
• Space between support arms adjusts from 3" to 16" to safely fit any size snare up to 16" in diameter
• Support arms and crossbars are removable for a clean look regardless of the number of drums on display
• Vertical drum orientation ensures drums are quiet when not in use

Specifications:
• Base Dimensions: 18" x 21.25"
• Crossbar Height Adjustment Slots: 22
• Max Drum Size: Fits drums up to 16" in diameter
• Rack Dimensions: 50.5" (H) x 21.25" (Width) x 23" (Depth)
• Support Arm Width Adjustment: 3"-16"
• Total Weight Capacity: 100 lbs. (90 combined on the crossbars plus 10 lbs. on the frame for hanging accessories)
• Tubing Diameter: 25 mm
• Weight Capacity Per Crossbar with Support Arms: 18 lbs.

On-Stage MIX-400 V2 Mobile Mixer Stand with Casters

Our MIX-400 Mobile Equipment Stand provides sturdy, easy-to-move access to mixing or performance gear. The side rails and front bumper adjust to hold equipment of various sizes firmly in place. Adjustable height and tilt angle enable positioning of the device for comfortable operation. Heavy-duty construction and five base legs deliver balance and stability to reliably support gear. For ease of movement and precise placement, the base rolls on casters that can lock for stationary use. Features a headphone hanging rack for storage of headphones or cables. To simply storage and transportation, the stand disassembles into three pieces.

Features:
• Disassembles into three pieces for ease of storage and transportation
• Headphone-handing rack securely stores up to four sets of headphones
• Height adjusts to a comfortable level for controlling devices while sitting or standing
• Stand moves easily on its rolling base and locking casters hold it safely
• Support arms flip to provide either front bumpers or brackets for mounting 1U rack gear
• Wide, heavy-duty base delivers balance and stability for dependable equipment support

Specifications:
• Application: Holds mixers, small-mid size audio gear, and 1U rack mount units
• Base Spread: 23"
• Construction: Steel, plastic
• Height Adjustment: 28"-38"
• Platform Length Adj.: 12"-15.5"
• Platform Width Adj.: 14..5"-21.5"
• Weight Capacity: 88 lbs.

On-Stage WSR7500B 12 Space Rack Cabinet with Casters Black

Protect and organize rack-mount components with our WSR7500B Rack Cabinet. This cabinet provides 12 rack spaces in a sturdy all-metal frame that securely supports a full load of gear. Great for use on its own, this versatile cabinet also forms a desktop extension when used in conjunction with our WS7500B Workstation and WSC7500B Workstation Corner Accessory.

Features:
• 12-space rack organizes and protects rack-mount components
• Rolls on removeable casters for ease of positioning and two casters lock to hold it safely in place
• Serves as a standalone rack or an extension of our WS7500 Workstation or WSC7500 Corner Accessory

Specifications:
• Application: 12 Space Rack Cabinet
• Color: Black
• Construction: Laminated Wood and Steel
• Dimensions: 30" wide x 23.8" deep
• Height with Casters: 30.5"
• Height with Feet: 29" - 30"
• Included: 4 removable casters - 1 pair locking
• Product Type: Workstation
• Weight Capacity: 175 lbs.