BSS

32_ccfdc652-d48f-4a54-b348-9cb7b52bc3cf__05564__37374.png,

BSS BLU805 Network Signal Processor w/ BLU link and AVB for Digital Audio System

$8,466.09

BSS BLU805 Network Signal Processor w/ BLU link and AVB for Digital Audio System

Ships Free!

The Soundweb London BLU-805 offers configurable I/O, configurable signal processing, Ethernet AVB audio and a high bandwidth, fault tolerant digital audio bus.

The BLU-805 has open architecture which is fully configurable through HiQnet™ Audio Architect. A rich palette of processing and logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment.

This processor features Ethernet AVB audio with primary and secondary ports for fault tolerance, with control through a separate Ethernet port.

The BLU-805 also features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber optic media converters can be used to increase the distance between devices to over 40km.

Four card slots facilitate many different device I/O configurations. Each slot can accommodate any of six available I/O cards, including the Analog Input Card, Analog Output Card, Digital Input Card, Digital Output Card, AEC Input Card, and Telephone Hybrid Card. Each card supports four channels.

Analog Input Cards provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Digital Input Cards and Digital Output Cards process AES/EBU and/or S/PDIF audio and offer a variety of clocking and syncing options. AEC Input Cards and Telephone Hybrid Cards facilitate specialized processing and interfacing primarily for teleconferencing applications. (Further information about the I/O cards can be found on dedicated datasheets)

Phantom Power, Sync, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. Device-specific information such as Device Name, Device Type, Firmware Version Number, Time, IP Address and Subnet Mask is available from the front panel display. A bi-directional locate function allows devices to be identified both from and within HiQnet Audio Architect.

12 Control Inputs and 6 Logic Outputs allow the BLU-805 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet Audio Architect.

The BLU-805 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution

Features

Four Input / Output Card Slots
Configurable Inputs / Outputs
Analog Inputs (with Phantom Power per Channel)
Analog Outputs
Digital Inputs (AES/EBU and S/PDIF)
Digital Outputs (AES/EBU and S/PDIF)
AEC Inputs (with Phantom Power per Channel)
Telephone Hybrid Card
Configurable Signal Processing
Rich Palette of Processing and Logic Objects
Ethernet AVB Audio
256 Channel, Low Latency, Fault Tolerant Digital Audio Bus
Clear Front Panel LED Indication
Informative Front Panel Display
Bi-Directional Locate Functionality
12 Control Inputs and 6 Logic Outputs for GPIO Integration
Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
HiQnet Device
Configuration, Control and Monitoring from HiQnet Audio Architect

Specifications

Chassis: 19" (single rack space)

Custom I/O (card based): yes

Analog Inputs: up to 16

Digital Inputs: up to 16

AEC Inputs: up to 16

Analog Outputs: up to 16

Digital Outputs: up to 16

Telephone Connection: up to 4

Max Inputs/Outputs: 16

Config: Software

LCD Display: yes

Logic Processing: yes

RS-232: yes

GPIO: yes

Signal Processing (MHz): 800

Cobranet: no

Dante: no

AVB: yes

SWL Digital Audio Bus: 256

----------------------------------------------------------------------------------------------------------------

Echotone Music LLC is an experienced long time E-commerce Audio & Musical instrument dealer since 1998. We take pride in selling quality gear for musicians, sound engineers, production companies and broadcast applications.

Shipping --Items are well packed and shipped USPS, UPS or Pallet Freight Service. Items purchased on Friday may not ship until Monday or until the projected processing period. We are working hard to get your unit Built ( if needed), processed and shipped.

Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.

Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches, scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees & accessories or your return may be subject to a return handling charge.

Refunds or for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.

The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, strings, reeds, computers, tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes & polishing cloths, software/soundware, books, CDs, DVD's, vinyl records, and videos.

Happy customers, that's music to our ears!

Read more →

32_b0ba25b1-e1f9-4570-996d-6c27f51f256f__10410__31487.jpg,

Sold out

BSS BLUCARD-OUT Analog Output Sound Card AES/EBU and S/PDIF audio signals

$320.00

BSS BLUCARD-OUT Analog Output Sound Card AES/EBU and S/PDIF audio signals

The Soundweb London Analog Output Card is designed to populate any of the four card slots on Soundweb London BLU-800, BLU-805, BLU-806, BLU-320, BLU-325, BLU-326, BLU-160, BLU-120, BLU-80, BLU-32 and BLU-16 devices. This analog card enables Soundweb London devices to send line level signals.

The Analog Output Card has two Combicon connectors which are used as follows:

Connector 1

Balanced / Unbalanced Audio, Channel 1 - Mic/Line

Balanced / Unbalanced Audio, Channel 2 - Mic/Line

Connector 2

Balanced / Unbalanced Audio, Channel 3 - Mic/Line

Balanced / Unbalanced Audio, Channel 4 - Mic/Line

Connector [Mic/Line Combicon] [Mic/Line Combicon]

Signal 4 3 2 1

Pin [S + -] [S + -] [S + -] [S + -]

Balanced Hot: to + Unbalanced Hot: to +

Cold: to - Link to Shield: to -

Shield: to S Shield: to S

Specifications

Analog Outputs: 4 line

Output Type: balanced/unbalanced

----------------------------------------------------------------------------------------------------------------

Echotone Music LLC is an experienced long time E-commerce Audio & Musical instrument dealer since 1998. We take pride in selling quality gear for musicians, sound engineers, production companies and broadcast applications.

Shipping --Items are well packed and shipped USPS, UPS or Pallet Freight Service. Items purchased on Friday may not ship until Monday or until the projected processing period. We are working hard to get your unit Built ( if needed), processed and shipped.

Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.

Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches, scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees & accessories or your return may be subject to a return handling charge.

Refunds or for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.

The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, strings, reeds, computers, tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes & polishing cloths, software/soundware, books, CDs, DVD's, vinyl records, and videos.

Happy customers, that's music to our ears!

Read more →

32_62e40aa3-3d8a-4560-8b7b-bc6837bd5188__23801__99910.png,

Sold out

BSS BLU806 Network Signal Processor w/ BLU link & Dante for Digital Audio System

$4,500.00

BSS BLU806 Network Signal Processor w/ BLU link & Dante for Digital Audio System

Ships Free!

The Soundweb London BLU-806 offers configurable I/O, configurable signal processing, Dante audio and a high bandwidth, fault tolerant digital audio bus.

The BLU-806 has open architecture which is fully configurable through HiQnet London Architect™. A rich palette of processing and logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment.

The BLU-806 features Dante audio. The BLU-806 is capable of simultaneously transmitting and receiving up to 64 channels of Dante audio (64 x 64). Primary and Secondary ports are provided for fault tolerance. Control is through a separate Ethernet port.

The BLU-806 also features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.

Four card slots facilitate many different device I/O configurations. Each slot can accommodate any of six available I/O cards, including the Analog Input Card, Analog Output Card, Digital Input Card, Digital Output Card, AEC Input Card, and Telephone Hybrid Card. Each card supports four channels.

Analog Input Cards provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Digital Input Cards and Digital Output Cards process AES/EBU and/or S/PDIF audio and offer a variety of clocking and syncing options. AEC Input Cards and Telephone Hybrid Cards facilitate specialized processing and interfacing primarily for teleconferencing applications.

Phantom Power, Sync, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. Device-specific information such as Device Name, Device Type, Firmware Version Number, Time, IP Address and Subnet Mask is available from the front panel display. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.

12 Control Inputs and 6 Logic Outputs allow the BLU-806 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect.

The BLU-806 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.

Features

Four Input / Output Card Slots
Configurable Inputs / Outputs
Analog Inputs (with Phantom Power per Channel)
Analog Outputs
Digital Inputs (AES/EBU and S/PDIF)
Digital Outputs (AES/EBU and S/PDIF)
AEC Inputs (with Phantom Power per Channel)
Telephone Hybrid Card
Configurable Signal Processing
Rich Palette of Processing and Logic Objects
AES67 and Dante Audio with support for Dante Domain Manager
256 Channel, Low Latency, Fault Tolerant Digital Audio Bus
Clear Front Panel LED Indication
Informative Front Panel Display
Bi-Directional Locate Functionality
12 Control Inputs and 6 Logic Outputs for GPIO Integration
Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
HiQnet Device
Configuration, Control and Monitoring from HiQnet Audio Architect
AES67 Compatible
EN 54-16 Compliant for life safety applications

Specifications

Chassis: 19" (single rack space)

Custom I/O (card based): yes

Analog Inputs: up to 16

Digital Inputs: up to 16

AEC Inputs: up to 16

Analog Outputs: up to 16

Digital Outputs: up to 16

Telephone Connection: up to 4

Max Inputs/Outputs: 16

Config: Software

LCD Display: yes

Logic Processing: yes

RS-232: yes

GPIO: yes

Signal Processing (MHz): 800

Cobranet: no

Dante: yes

AVB: no

SWL Digital Audio Bus: 256

----------------------------------------------------------------------------------------------------------------

Echotone Music LLC is an experienced long time E-commerce Audio & Musical instrument dealer since 1998. We take pride in selling quality gear for musicians, sound engineers, production companies and broadcast applications.

Shipping --Items are well packed and shipped USPS, UPS or Pallet Freight Service. Items purchased on Friday may not ship until Monday or until the projected processing period. We are working hard to get your unit Built ( if needed), processed and shipped.

Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.

Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches, scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees & accessories or your return may be subject to a return handling charge.

Refunds or for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.

The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, strings, reeds, computers, tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes & polishing cloths, software/soundware, books, CDs, DVD's, vinyl records, and videos.

Happy customers, that's music to our ears!

Read more →

32_a17724d6-482d-4403-97ee-541817fb8c0d__36394__47296.jpg,

Sold out

BSS BLUCARD-IN Analog Input Card for Microphone/Line Inputs Audio System

$320.00

BSS BLUCARD-IN Analog Input Card for Microphone/Line Inputs Audio System

Ships Free!

The Soundweb London Analog Input Card is designed to populate any of the four card slots on Soundweb London BLU-800, BLU-805, BLU-806, BLU-320, BLU-325, BLU-326, BLU-160, BLU-120, BLU-80, BLU-32 and BLU-16 devices. This analog card enables Soundweb London devices to receive microphone / line level signals.

The Soundweb London Analog Input Card offers Phantom Power, configurable per channel and software controlled analog gain in 6dB steps from 0dB to 48dB.

The Analog Input Card has two Combicon connectors which are used as follows:

Connector 1

Balanced / Unbalanced Audio, Channel 1 - Mic/Line

Balanced / Unbalanced Audio, Channel 2 - Mic/Line

Connector 2

Balanced / Unbalanced Audio, Channel 3 - Mic/Line

Balanced / Unbalanced Audio, Channel 4 - Mic/Line

Connector [Mic/Line Combicon] [Mic/Line Combicon]

Signal 4 3 2 1

Pin [S + -] [S + -] [S + -] [S + -]

Balanced Hot: to + Unbalanced Hot: to +

Cold: to - Link to Shield: to -

Shield: to S Shield: to S

Specifications

Analog Inputs: 4 mic/line

Input Type: balanced/unbalanced

Phantom Power: yes

----------------------------------------------------------------------------------------------------------------

Echotone Music LLC is an experienced long time E-commerce Audio & Musical instrument dealer since 1998. We take pride in selling quality gear for musicians, sound engineers, production companies and broadcast applications.

Shipping --Items are well packed and shipped USPS, UPS or Pallet Freight Service. Items purchased on Friday may not ship until Monday or until the projected processing period. We are working hard to get your unit Built ( if needed), processed and shipped.

Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.

Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches, scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees & accessories or your return may be subject to a return handling charge.

Refunds or for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.

The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, strings, reeds, computers, tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes & polishing cloths, software/soundware, books, CDs, DVD's, vinyl records, and videos.

Happy customers, that's music to our ears!

Read more →

32_ae2ec17a-a2f5-49de-a0c2-15491546f29e__09439__61773.png,

BSS BLU-160 Network Signal Processor with BLU link for Digital Audio System

$3,300.00

BSS BLU-160 Network Signal Processor with BLU link for Digital Audio System

Ships Free!

The Soundweb London BLU-160 offers configurable I/O, configurable signal processing and a high bandwidth, fault tolerant digital audio bus.

The BLU-160 has open architecture which is fully configurable through HiQnet™ Audio Architect. A rich palette of processing and logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment.

This processor features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber optic media converters can be used to increase the distance between devices to over 40km.

Four card slots facilitate many different device I/O configurations. Each slot can accommodate any of six available I/O cards, including the Analog Input Card, Analog Output Card, Digital Input Card, Digital Output Card, AEC Input Card, and Telephone Hybrid Card. Each card supports four channels.

Analog Input Cards provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Digital Input Cards and Digital Output Cards process AES/EBU and/or S/PDIF audio and offer a variety of clocking and syncing options. (Further information about the I/O cards can be found on dedicated datasheets)

Phantom Power, Sync, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. Device-specific information such as Device Name, Device Type, Firmware Version Number, Time, IP Address and Subnet Mask is available from the front panel display. A bi-directional locate function allows devices to be identified both from and within HiQnet Audio Architect.

12 Control Inputs and 6 Logic Outputs allow the BLU-160 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet Audio Architect.

The BLU-160 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.

This signal processor is EN 54-16 Compliant for life safety applications.

Features

Four Input / Output Card Slots
Configurable Inputs / Outputs
Analog Inputs (with Phantom Power per Channel)
Analog Outputs
Digital Inputs (AES/EBU and S/PDIF)
Digital Outputs (AES/EBU and S/PDIF)
AEC Inputs (with Phantom Power per Channel)
Telephone Hybrid Card
Configurable Signal Processing
Rich Palette of Processing and Logic Objects
256 Channel, Low Latency, Fault Tolerant Digital Audio Bus
Clear Front Panel LED Indication
Informative Front Panel Display
Bi-Directional Locate Functionality
12 Control Inputs and 6 Logic Outputs for GPIO Integration
Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
HiQnet Device
Configuration, Control and Monitoring from HiQnet Audio Architect
EN 54-16 Compliant for life safety

Specifications

Chassis: 19" (single rack space)

Custom I/O (card based): yes

Analog Inputs: up to 16

Digital Inputs: up to 16

AEC Inputs: up to 16

Analog Outputs: up to 16

Digital Outputs: up to 16

Telephone Connection: up to 4

Max Inputs/Outputs: 16

Config: Software

LCD Display: yes

Logic Processing: yes

RS-232: yes

GPIO: yes

Signal Processing (MHz): 800

Cobranet: no

SWL Digital Audio Bus: 256

AVB: no

Dante: no

----------------------------------------------------------------------------------------------------------------

Echotone Music LLC is an experienced long time E-commerce Audio & Musical instrument dealer since 1998. We take pride in selling quality gear for musicians, sound engineers, production companies and broadcast applications.

Shipping --Items are well packed and shipped USPS, UPS or Pallet Freight Service. Items purchased on Friday may not ship until Monday or until the projected processing period. We are working hard to get your unit Built ( if needed), processed and shipped.

Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.

Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches, scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees & accessories or your return may be subject to a return handling charge.

Refunds or for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.

The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, strings, reeds, computers, tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes & polishing cloths, software/soundware, books, CDs, DVD's, vinyl records, and videos.

Happy customers, that's music to our ears!

Read more →

32_ec2c9aa4-10d5-4eb8-ae54-fb8230178ea2__88726__08283.png,

BSS Soundweb London BLU-100 12X8 Network Signal Processor Blue Link 5yr Warranty

$2,100.00

BSS Soundweb Londen BLU-100 12X8 Network Signal Processor with Blue Link

Ships Free!

The Soundweb London BLU-100 offers a fixed configuration of 12 inputs and 8 outputs, configurable signal processing and a high bandwidth, fault tolerant digital audio bus.

The BLU-100 has open architecture which is fully configurable through HiQnet™ Audio Architect. A rich palette of processing and logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment.

This processor features a low latency, fault tolerant digital audio bus of 48 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.

The BLU-100 is compatible with the entire Soundweb London family and its 48 channel digital audio bus represents channels 1-48 of the larger 256 channel digital audio bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120 and BLU-BOB devices.

Analog Inputs provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel.

Phantom Power, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. A bi-directional locate function allows devices to be identified both from and within HiQnet Audio Architect.

12 Control Inputs and 6 Logic Outputs allow the BLU-100 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet Audio Architect.

The BLU-100 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.

Features

12 Analog Inputs (with 48v Phantom Power per Channel)

8 Analog Outputs

Configurable Signal Processing

Rich Palette of Processing and Logic Objects

48 Channel, Low Latency, Fault Tolerant Digital Audio Bus

Clear Front Panel LED Indication

Bi-Directional Locate Functionality

12 Control Inputs and 6 Logic Outputs for GPIO Integration

Soundweb London Interface Kit for Third Party Control System Integration (Documentation)

HiQnet Device

Configuration, Control and Monitoring from HiQnet Audio Architect

Specifications

Chassis 19" (single rack space)

Custom I/O (card based) no

Analog Inputs 12

Digital Inputs 0

AEC Inputs 0

Analog Outputs 8

Digital Outputs 0

Telephone Connection 0

Max Inputs/Outputs fixed

Config Software

LCD Display no

Logic Processing yes

RS-232 yes

GPIO yes

Signal Processing (MHz) 400

Cobranet no

SWL Digital Audio Bus 48

AVB no

Dante no

----------------------------------------------------------------------------------------------------------------

Echotone Music LLC is an experienced long time E-commerce Audio & Musical instrument dealer since 1998. We take pride in selling quality gear for musicians, sound engineers, production companies and broadcast applications.

Shipping --Items are well packed and shipped USPS, UPS or Pallet Freight Service. Items purchased on Friday may not ship until Monday or until the projected processing period. We are working hard to get your unit Built ( if needed), processed and shipped.

Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.

Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as belt-buckle or pick scratches, scuffs, dings or scrapes, screw mount marks or collateral materials. Items must also include all original packaging, manuals, warrantees and accessories or your return may be subject to a return handling charge.

If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.

The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, strings, reeds, computers, tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, body jewelry, sheet music, cleaners, polishes and polishing cloths, software/soundware, books, CDs, DVD's, vinyl records, and videos.

Happy customers, that's music to our ears!

Read more →

32_a442690e-5292-4ebd-bc16-bafb70035834__93215__66445.jpg,

Sold out

BSS BLU-8-V2-BLK Programmable Zone Controller for Amplifiers Audio System

$1,020.00

BSS BLU-8-V2-BLK Programmable Zone Controller for Amplifiers Audio System

Ships Free!

The BLU-8v2 is a HiQnet compatible programmable zone controller capable of controlling a single zone, four zones or eight zones in different modes of operation. A simple control surface and informative visual feedback ensure that non-technical users can be confident in making changes to an integrated AV system.

The BLU-8v2 shares the same feature set and appearance as the original BLU-8 but benefits from a significant hardware upgrade. Under the surface, the BLU-8v2 has much in common with the rack-mount Soundweb London devices and this revised hardware design offers considerable enhancement to networking functionality. The BLU-8v2 is available in black.

Specifications

Chassis: 3-Gang US

Control In: Ethernet

Display: 9-segment LED meter, RGB LEDs

Power Over Ethernet (PoE): yes

Config: Software

Controls: two rotary encoders, five push buttons

----------------------------------------------------------------------------------------------------------------

Echotone Music LLC is an experienced long time E-commerce Audio & Musical instrument dealer since 1998. We take pride in selling quality gear for musicians, sound engineers, production companies and broadcast applications.

Shipping --Items are well packed and shipped USPS, UPS or Pallet Freight Service. Items purchased on Friday may not ship until Monday or until the projected processing period. We are working hard to get your unit Built ( if needed), processed and shipped.

Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.

Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches, scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees & accessories or your return may be subject to a return handling charge.

Refunds or for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.

The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, strings, reeds, computers, tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes & polishing cloths, software/soundware, books, CDs, DVD's, vinyl records, and videos.

Happy customers, that's music to our ears!

Read more →

32_f3dce506-ef9f-4573-9ec3-9e69143ea7c6__59581__85825.jpg,

Sold out

BSS EC-4BBLKUS Ethernet Wall Controller w/ 4 Buttons for Amplifier Sound System

$390.00

BSS EC-4BBLKUS Ethernet Wall Controller w/ 4 Buttons for Amplifier Sound System

Ships Free!

The Soundweb Contrio EC-4B is an Ethernet wall controller for use in Harman HiQnet systems. The EC-4B can control and monitor parameters within BSS Audio Soundweb London and other HiQnet devices, including Crown DCi series amplifiers. The EC-4B is available in black, and in single-gang US Decora form factor. The EC-4B contains a single Ethernet port for configuration, control, monitoring, and power via PoE. The EC-4B is configured via simple drag-and-drop operations within the software application HiQnet Audio Architect.

The EC-4B contains four buttons and one LCD screen. The buttons and LCD screen are multi-color backlit, capable of eight different colors with adjustable intensity.

The four buttons can be pressed for binary parameter control (e.g. mute), preset recall, or source selection.

The LCD screen has a screen resolution of 64x128 pixels, and can display custom text.

The EC-4B supports ‘sleep’ functionality. After a specified amount of time with no user input, the EC-4B can turn off all LEDs. This is useful to avoid distraction in a dimly lit environment. Any user interaction will ‘wake up’ the controller.

The EC-4B can be remotely locked and unlocked via other control systems. The EC-4B can be locally unlocked via a four-digit PIN entry on the buttons.

Features

Ethernet Wall Controller
Compatible with BSS Audio Soundweb London, Crown DCi, and other HiQnet devices
Available in Black
Available in US Decora
Single-Gang Size
PoE (Power Over Ethernet)
Configured within Audio Architect via Drag-and-Drop
4 Programmable Buttons (Multicolored)
1 Programmable 64x128 Pixel LCD (Multicolored)
Sleep Function
Security: Remote Lock/Unlock and Local Unlock via PIN Entry

----------------------------------------------------------------------------------------------------------------

Echotone Music LLC is an experienced long time E-commerce Audio & Musical instrument dealer since 1998. We take pride in selling quality gear for musicians, sound engineers, production companies and broadcast applications.

Shipping --Items are well packed and shipped USPS, UPS or Pallet Freight Service. Items purchased on Friday may not ship until Monday or until the projected processing period. We are working hard to get your unit Built ( if needed), processed and shipped.

Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.

Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches, scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees & accessories or your return may be subject to a return handling charge.

Refunds or for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.

The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, strings, reeds, computers, tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes & polishing cloths, software/soundware, books, CDs, DVD's, vinyl records, and videos.

Happy customers, that's music to our ears!

Read more →

BSS BSSEC8BV-WHT-M Ethernet Wall Controller with 8 Buttons and Volume Control

$585.00

BSS BSSEC8BV-WHT-M Ethernet Wall Controller with 8 Buttons and Volume Control

The Soundweb Contrio EC-8BV is an Ethernet wall controller for use in Harman HiQnet systems. The EC-8BV can control and monitor parameters within BSS Audio Soundweb London and other HiQnet devices, including Crown DCi series amplifiers.
The EC-8BV is available in white, and in dual-gang US Decora or dual-gang EU form factor. The EC-8BV contains a single Ethernet port for configuration, control, monitoring, and power via PoE. The EC-8BV is configured via simple drag-and-drop operations within the software application HiQnet Audio Architect.

The EC-8BV contains one push/rotary encoder, one encoder ring, eight buttons, and two LCD screens. The buttons, encoder ring, and LCD screens are multi-color backlit, capable of eight different colors with adjustable intensity.

The push/rotary encoder can be rotated for continuous parameter control (e.g. volume). The push/rotary encoder can also be pressed for binary parameter control (e.g. mute) or preset recall.

The encoder ring can display a bouncing audio meter. When the push/rotary encoder is rotated, the encoder ring can temporarily display a volume setting. When the push/rotary encoder is pressed, the encoder ring can temporarily display a binary parameter setting (e.g. red/green for muted/unmuted status).

The eight buttons can be pressed for binary parameter control (e.g. mute), preset recall, or source selection.

The two LCD screens each have a screen resolution of 64x128 pixels, and can each display custom text.

The EC-8BV supports ‘sleep’ functionality. After a specified amount of time with no user input, the EC-8BV can turn off all LEDs. This is useful to avoid distraction in a dimly lit environment. Any user interaction will ‘wake up’ the controller.

The EC-8BV can be remotely locked and unlocked via other control systems. The EC-8BV can be locally unlocked via a four-digit PIN entry on the buttons.

The EC-8BV supports multiple modes of operation. This allows the push/rotary encoder, encoder ring, and certain buttons to be reassigned dynamically to different parameters based on which buttons are selected.

Features:
Ethernet Wall Controller
Compatible with BSS Audio Soundweb London, Crown DCi, and other HiQnet devices
Available in White
Available in US Decora or EU Version
Dual-Gang Size
PoE (Power Over Ethernet)
Configured within Audio Architect via Drag-and-Drop
1 Programmable Push/Rotary Encoder
1 Programmable Encoder Ring (Multicolored)
8 Programmable Buttons (Multicolored)
2 Programmable 64x128 Pixel LCDs (Multicolored)
Sleep Function
Security: Remote Lock/Unlock and Local Unlock via PIN Entry
Multiple Modes of Operation

Read more →

BSS BSSEC4BV-BLK-M Ethernet Wall Controller with 4 Buttons and Volume Control

$445.00

BSS BSSEC4BV-BLK-M Ethernet Wall Controller with 4 Buttons and Volume Control

The Soundweb Contrio EC-4BV is an Ethernet wall controller for use in Harman HiQnet systems. The EC-4BV can control and monitor parameters within BSS Audio Soundweb London and other HiQnet devices, including Crown DCi series amplifiers.
The EC-4BV is available in black, and in single-gang US Decora or single-gang EU form factor. The EC-4BV contains a single Ethernet port for configuration, control, monitoring, and power via PoE. The EC-4BV is configured via simple drag-and-drop operations within the software application HiQnet Audio Architect.

The EC-4BV contains one push/rotary encoder, one encoder ring, four buttons, and one LCD screen. The buttons, encoder ring, and LCD screen are multi-color backlit, capable of eight different colors with adjustable intensity.

The push/rotary encoder can be rotated for continuous parameter control (e.g. volume). The push/rotary encoder can also be pressed for binary parameter control (e.g. mute) or preset recall.
The encoder ring can display a bouncing audio meter. When the push/rotary encoder is rotated, the encoder ring can temporarily display a volume setting. When the push/rotary encoder is pressed, the encoder ring can temporarily display a binary parameter setting (e.g. red/green for muted/unmuted status).

The four buttons can be pressed for binary parameter control (e.g. mute), preset recall, or source selection.

The LCD screen has a screen resolution of 64x128 pixels, and can display custom text.

The EC-4BV supports ‘sleep’ functionality. After a specified amount of time with no user input, the EC-4BV can turn off all LEDs. This is useful to avoid distraction in a dimly lit environment. Any user interaction will ‘wake up’ the controller.

The EC-4BV can be remotely locked and unlocked via other control systems. The EC-4BV can be locally unlocked via a four-digit PIN entry on the buttons.

The EC-4BV supports multiple modes of operation. This allows the push/rotary encoder and encoder ring to be reassigned dynamically to different parameters based on which buttons are selected.

Features:
Ethernet Wall Controller
Compatible with BSS Audio Soundweb London, Crown DCi, and other HiQnet devices
Available in Black
Available in US Decora or EU Version
Single-Gang Size
PoE (Power Over Ethernet)
Configured within Audio Architect via Drag-and-Drop
1 Programmable Push/Rotary Encoder
1 Programmable Encoder Ring (Multicolored)
4 Programmable Buttons (Multicolored)
1 Programmable 64x128 Pixel LCD (Multicolored)
Sleep Function
Security: Remote Lock/Unlock and Local Unlock via PIN Entry
Multiple Modes of Operation

Read more →

BSS BSSEC4BV-WHT-M Ethernet Wall Controller with 4 Buttons and Volume Control

$445.00

BSS BSSEC4BV-WHT-M Ethernet Wall Controller with 4 Buttons and Volume Control

The Soundweb Contrio EC-4BV is an Ethernet wall controller for use in Harman HiQnet systems. The EC-4BV can control and monitor parameters within BSS Audio Soundweb London and other HiQnet devices, including Crown DCi series amplifiers.
The EC-4BV is available in white, and in single-gang US Decora or single-gang EU form factor. The EC-4BV contains a single Ethernet port for configuration, control, monitoring, and power via PoE. The EC-4BV is configured via simple drag-and-drop operations within the software application HiQnet Audio Architect.

The EC-4BV contains one push/rotary encoder, one encoder ring, four buttons, and one LCD screen. The buttons, encoder ring, and LCD screen are multi-color backlit, capable of eight different colors with adjustable intensity.

The push/rotary encoder can be rotated for continuous parameter control (e.g. volume). The push/rotary encoder can also be pressed for binary parameter control (e.g. mute) or preset recall.
The encoder ring can display a bouncing audio meter. When the push/rotary encoder is rotated, the encoder ring can temporarily display a volume setting. When the push/rotary encoder is pressed, the encoder ring can temporarily display a binary parameter setting (e.g. red/green for muted/unmuted status).

The four buttons can be pressed for binary parameter control (e.g. mute), preset recall, or source selection.

The LCD screen has a screen resolution of 64x128 pixels, and can display custom text.

The EC-4BV supports ‘sleep’ functionality. After a specified amount of time with no user input, the EC-4BV can turn off all LEDs. This is useful to avoid distraction in a dimly lit environment. Any user interaction will ‘wake up’ the controller.

The EC-4BV can be remotely locked and unlocked via other control systems. The EC-4BV can be locally unlocked via a four-digit PIN entry on the buttons.

The EC-4BV supports multiple modes of operation. This allows the push/rotary encoder and encoder ring to be reassigned dynamically to different parameters based on which buttons are selected.

Features:
Ethernet Wall Controller
Compatible with BSS Audio Soundweb London, Crown DCi, and other HiQnet devices
Available in White
Available in US Decora or EU Version
Single-Gang Size
PoE (Power Over Ethernet)
Configured within Audio Architect via Drag-and-Drop
1 Programmable Push/Rotary Encoder
1 Programmable Encoder Ring (Multicolored)
4 Programmable Buttons (Multicolored)
1 Programmable 64x128 Pixel LCD (Multicolored)
Sleep Function
Security: Remote Lock/Unlock and Local Unlock via PIN Entry
Multiple Modes of Operation

Read more →

Sold out

BSS BSSRACKSHELF1UFX 1U Rack Mount Kit for BLU-BIB and BLU-BOB

$135.00

BSS BSSRACKSHELF1UFX 1U Rack Mount Kit for BLU-BIB and BLU-BOB

The BSS Audio 1U Rack-Mount Kit allows up to two half-rack Soundweb London devices—BLU-BIB and BLU-BOB1—to be mounted on a shelf occupying a single rack space.

The 1U Rack-Mount Kit can accommodate one BLU-BIB device, one BLU-BOB1 device, two BLU-BIB devices, two BLU-BOB1 devices, or one of each device. With each device offering eight channels of analog I/O expansion, the 1U Rack-Mount Kit allows for higher I/O density (16 channels) in a single rack space.

For instances in which only one I/O expander is mounted, the included half-rack blanking plate can be used to fill the blank space in the front of the rack.

Features:
Accommodates Two BLU-BIB / BLU-BOB1 Devices in One Rack Space
Half-Rack Blanking Plate for Unused Space (included)
Mounting Screws for Securing Devices to Shelf (included)

Read more →

Sold out

BSS BSSECV-BLK-M Ethernet Wall Controller with Volume Control

$300.00

BSS BSSECV-BLK-M Ethernet Wall Controller with Volume Control

The Soundweb Contrio EC-V is an Ethernet wall controller for use in Harman HiQnet systems. The EC-V can control and monitor parameters within BSS Audio Soundweb London and other HiQnet devices, including Crown DCi series amplifiers. The EC-V is available in black, and in single-gang US Decora or single-gang EU form factor. The EC-V contains a single Ethernet port for configuration, control, monitoring, and power via PoE. The EC-V is configured via simple drag-and-drop operations within the software application HiQnet Audio Architect.

The EC-V contains one push/rotary encoder and one encoder ring. The encoder ring is multi-color backlit, capable of eight different colors with adjustable intensity.

The push/rotary encoder can be rotated for continuous parameter control (e.g. volume). The push/rotary encoder can also be pressed for binary parameter control (e.g. mute) or preset recall.

The encoder ring can display a bouncing audio meter. When the push/rotary encoder is rotated, the encoder ring can temporarily display a volume setting. When the push/rotary encoder is pressed, the encoder ring can temporarily display a binary parameter setting (e.g. red/green for muted/unmuted status).

The EC-V supports ‘sleep’ functionality. After a specified amount of time with no user input, the EC-V can turn off all LEDs. This is useful to avoid distraction in a dimly lit environment. Any user interaction will ‘wake up’ the controller.

The EC-V can be remotely locked and unlocked via other control systems.

Features:
Ethernet Wall Controller
Compatible with BSS Audio Soundweb London, Crown DCi, and other HiQnet devices
Available in Black
Available in US Decora or EU Version
Single-Gang Size
PoE (Power Over Ethernet)
Configured within Audio Architect via Drag-and-Drop
1 Programmable Push/Rotary Encoder
1 Programmable Encoder Ring (Multicolor)
Sleep Function
Security: Remote Lock/Unlock

Read more →

Sold out

BSS BSSBLUDIGITALOUT-M 4 Digital Output Card for Soundweb London Chassis

$320.00

BSS BSSBLUDIGITALOUT-M 4 Digital Output Card for Soundweb London Chassis

The Soundweb London Digital Output card is designed to populate any of the four card slots on Soundweb London BLU-800, BLU-805, BLU-806, BLU-320, BLU-325, BLU-326, BLU-160, BLU-120, BLU-80, BLU-32 and BLU-16 devices. These digital cards enable Soundweb London devices to receive AES/EBU and S/PDIF audio signals.

The Digital Output Card can be configured in the following ways:
2 Stereo AES/EBU Signals
1 Stereo AES/EBU signal / 1 Stereo S/PDIF Signal
2 Stereo S/PDIF Signals

The Digital Output Card has two Combicon connectors which are used as follows:
Connector 1
Stereo Audio, Channels 1 and 2 - AES/EBU / S/PDIF
Stereo Audio, Channels 3 and 4 - AES/EBU / S/PDIF
Connector 2*
Clock Input - High Impedance
Clock Input - 75R Terminated

* active clock selected within HiQnet London Architect

Connector [Clock Input] [Audio Output]
Signal 3&4 1&2 3&4 1&2
Pin [S + -] [S + -] [S + -] [S + -]

Clock Input Positive: to + AES/EBU Positive: to + S/PDIF Signal: to +
Negative: to - Negative: to - Signal Ground: to -
nil or -: to S Shield: to S Shield*: to S
* Short "S" to "-" for unshielded cable

Specifications:
Digital Outputs 4
Digital Output Type AES/EBU and S/PDIF
Word Sync Input yes

Read more →

Sold out

BSS BSSBLU-DANFX Dante AES67 to BLU link Bridge Networked Audio System

$1,400.00

BSS BSSBLU-DANFX Dante AES67 to BLU link Bridge Networked Audio System The Soundweb London BLU-DA offers Dante / AES67 audio and BLU link. This means that the BLU-DA can be used to ‘add’ Dante / AES67 to one or more BLU link devices. The BLU-DA is configurable through HiQnet™ Audio Architect. A rich palette of logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment. The BLU-DA features Dante and AES67 audio. The BLU-DA is capable of simultaneously transmitting and receiving up to 64 channels of Dante or AES67 audio (64 x 64). Primary and Secondary ports are provided for fault tolerance. Control is through a separate Ethernet port. The BLU-DA also includes support for Dante 4.0 firmware for integration with Dante Domain Manager. The BLU-DA also features BLU link, a low latency, fault tolerant digital audio bus of 256 channels, which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km. A bi-directional locate function allows devices to be identified both from and within HiQnet Audio Architect. The BLU-DA and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution. This signal processor is EN 54-16 Compliant for life safety applications. Features:AES67 and Dante Audio with support for Dante Domain ManagerBLU link – 256 Channel, Low Latency, Fault Tolerant Digital Audio Bus‘Add’ Dante / AES67 to one or more BLU link devicesClear Front Panel LED IndicationBi-Directional Locate FunctionalityHiQnet DeviceConfiguration, Control and Monitoring from HiQnet Audio Architect1RU, Half-Rack DeviceAES67 CompatibleEN 54-16 Compliant for life safety applications Specifications:Chassis: Half rack (single space, half-width)Dante: yesSWL Digital Audio Bus: 256RS-232: yes

Read more →

Sold out

BSS BSSBLUDIGITALIN-M 4 Digital Input Card for Soundweb London Chassis

$320.00

BSS BSSBLUDIGITALIN-M 4 Digital Input Card for Soundweb London Chassis

The Soundweb London Digital Input card is designed to populate any of the four card slots on Soundweb London BLU-800, BLU-805, BLU-806, BLU-320, BLU-325, BLU-326, BLU-160, BLU-120, BLU-80, BLU-32 and BLU-16 devices. These digital cards enable Soundweb London devices to receive AES/EBU and S/PDIF audio signals.

The Digital Input Card can be configured in the following ways:
2 Stereo AES/EBU Signals
1 Stereo AES/EBU signal / 1 Stereo S/PDIF Signal
2 Stereo S/PDIF Signals

The Digital Input Card has two Combicon connectors which are used as follows:
Connector 1
Stereo Audio, Channels 1 and 2 - AES/EBU
Stereo Audio, Channels 3 and 4 - AES/EBU
Connector 2
Stereo Audio, Channels 1 and 2 - S/PDIF
Stereo Audio, Channels 3 and 4 - S/PDIF

Connector [S/PDIF Combicon] [AES/EBU Combicon]
Signal 4 3 2 1
Pin [S + -] [S + -] [S + -] [S + -]

Balanced Positive: to + Unbalanced Signal: to +
Negative: to - Signal Ground: to -
Shield: to S Shield*: to S
* Short "S" to "-" for unshielded cable

Read more →

Sold out

BSS Audio BSSBLU-BOB1-M 8ch Expander Break Out Box

$1,075.00

BSS Audio BSSBLU-BOB1-M 8ch Expander Break Out Box

The BLU-BOB1 output channels are easily configured by six DIP switches located on the rear of the device, which select consecutive channels in groups of eight. This simple configuration allows selection of any 8-channel range from the 256 channels available on the digital audio bus. Output channel assignments are configured by DIP switch selection only. The BLU-BOB1 is not configured by HiQnet™ Audio Architect.

The 8 analog line level outputs utilize the same terminal block connectors as the other members of the Soundweb London family.

Signal present and power status are clearly displayed by front panel LED indicators.

Two chassis styles are available, the first (BLU-BOB1) is a half rack width, desk or wall mounted version and the second (BLU-BOB2) is a 19” single rack space version with mounting ears for equipment racks. Front panel indication and rear panel connections are identical on both versions.

The BLU-BOB1 break-out box output expanders are powered by a 12V DC adapter which is included with the devices.

The BLU-BOB1 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.

Features
8 Analog Audio Outputs
Standard Terminal Block Connectors for Analog Audio Connections
DIP Switches for Channel Range Selection
256 Channel, Low Latency, Fault Tolerant Digital Audio Bus
Clear Front Panel LED Indication
12VDC External Power included
Terminal Block Connectors for Power Connection
Half Rack Width, Desk Mount or Wall Mount Chassis

Te chn i c al S p e c ifi c at io ns:

Front Panel LED Indicators: Signal present per output, and Power
Analog Outputs: 8 electronically balanced on Phoenix/Combicon
removable screw connectors
Maximum Output Level: +19dBu
Frequency Response: 20Hz-20KHz (+0.5dB/-1dB)
THD: <0.01% 20Hz to 20KHz, +10dBu output
Dynamic Range: 108dB typical, 22Hz-22KHz unweighted
Crosstalk: <-75dB
D/A Latency: 28/Fs [0.58ms@48K, 0.29ms@96K]
Digital Audio Bus:
Connectors: 2 x RJ45 Ethernet connectors
Maximum Cable Length: 100m/300ft on Category 5e cable between devices
Maximum Number of Nodes: 60
Latency Per Node: 4/Fs [0.08ms@48K, 0.04ms@96K]
Power and Dimensions:
Mains Voltage: 12V DC external power supply included
AC Power Input to Adapter: 19W
BTU Rating: <65 BTU/hr
Operating Temperature Range: 5 (41) to 35 (95) degrees C (degrees F)
Dimensions BLU-BOB1 (H(U) x W x D): 1.65” x 8.63” x 7.75” (42mm x 219mm x 197mm)
Dimensions BLU-BOB2 (H(U) x W x D): 1.75” x 19” x 7.75” (45mm x 483mm x 197mm)
Weight BLU-BOB1: 2.96 lbs / 1.34 kg
Weight BLU-BOB2: 5.13 lbs / 2.33 kg

Read more →

BBS BSSBLU160M-US Networked Signal Processor with BLU Link Chassis HiQnet Device

$3,300.00

BBS BSSBLU160M-US Networked Signal Processor with BLU Link Chassis HiQnet Device