Rane

Rane DR6 Digital Touchscreen Remote Control for Halogen Network Systems

The DR6 is a fully customizable touchscreen remote for the HAL family. It supports multiple pages or tabs, and any set of levels, toggles, selectors and/or commands. Drag, drop, and resize controls as desired. Ability to use custom background images and logos in full-color on the 7-inch LCD display.

Screw the included wall-mount bracket over U.S. (or international) electrical boxes, or flush-mount the DR6 with the bracket, and cut a 2” (5 cm) square hole in the wall to accommodate the cable.

Optional, on-screen User Access logins secure management pages from public or staff use, and a programmable ambient light sensor automatically dims the backlight. The Control Page Designer in Halogen allows the user to create one set of pages and use them in a web control design, DR6 display or both.

Features:
Fully customizable touchscreen controller
Electrical box or wall flush-mount options
Supports multiple pages or tabs and any set of levels, toggles, selectors and/or commands
Drag, drop and resize controls as desired
RANE RPI (Remote Power Injector - not included) required for use with HAL3s and legacy HAL multiprocessors

What's in the box
DR6
Wall-Mount Bracket
User Guide
Safety & Warranty Manual

Specifications:
Parameter                                     Specification                   Limit             Conditions / Comments
Display
Size                                              3.38" x 6"                                             8.6 x 15.5cm
Resolution                                    480 x 800 pixels
Color Depth                                 16-bit 131,071 colours
Ambient Light Sensitivity               Software configurable                            Adjust the sensitivity to ambient light changes
Touch Screen 
Size                                             3.42" x 6.10"                                          8.7 x 15.5cm
Type Resistive
Included Wall Plate Size                  4.41"H x 7.7"W                                      11.2 x 19.6cm
Included Mounting Screws               #6-32x¼" Torx T10 (qty 2)                    Secures DR6 to Wall Plate or DS1 desk stand
Included Wall Screws                      #6-20x1-¼" (qty 4)                               Drywall / cement anchors included
Included Electrical Box Screws         #6-32x7/8" (qty 4)                                Used to mount Wall Plate to an electrical                                                                                                                       box or RB1
RPI REMOTE POWER INJECTOR (INCLUDED)
Data Input Port                                 To the DR6                                          RJ-45 connector
Data Output Port                               Resistive                                              RJ-45 connector
Power                                               24 VDC @ 550mA               max
HAL to RPI to DR6 Distance               100 meters / 325 feet total   max           Shielded CAT5e cable or better
Power Requirement                          100 to 240V AC                                     50/60Hz, 18W max
Wiring Class 2                                  All                                                        RJ-45 connectors
Ambient Room Temperature              40 °C (104 °F)                                     Maximum external loading
RPI Unit: Size                                   1.78” H x 6.9” W x 2.79” D                   4.6 x 17.6 x 7cm
Weight                                            14.1 oz                                                400g
DR6 UNIT
Conformity                                      CE, FCC, CCSAUS
Size                                                5.0” H x 7.7” W x 0.76” D                      12.6 x 19.6 x 1.9cm
Weight                                            1 lb                                                      455g
Shipping: Weight (DR6 with RPI)       3 lb 3oz                                                1.47g
Size                                                2.2”H x 12.3”W x 10.3”D                       5.6 x 31.2 x 26.2cm
DS1 DESK STAND ACCESSORY
Size                                                4.5” H x 7.6” W x 4.6” D                        11.4 x 19.3 x 11.7cm
Weight                                             1 lb 1oz                                               480g
DS1 Shipping: Weight                        1 lb 5oz                                               600g
Size                                                5.4"H x 8.1"W x 6.1"D                            13.7 x 20.5 x 15.5cm
RB2 RACK BRACKET ACCESSORY
Size                                                5.2” H x 19” W x .4” D                           13.2 x 48.3 x 1cm
Speaker Mounting Bolt Circle Diameter   120mm (4.7”)                                  ±0.05” EIA 4” loudspeaker “standard”
Mechanically compatible speakers according to their data sheets:
1. Atlas FC-104 (tested and known to fit)
2. Lowell JR410 (untested but holes are properly placed)
3. Electro-Voice 205 (untested but holes are properly placed)
Weight                                            1 lb 6 oz                                                   613g
RB2 Shipping: Weight                       2 lb 4 oz                                                  1020g
Size                                                1.6” H x 21.5” W x 7.9” D                          4 x 55 x 20cm

Rane ZONE PAGER 6 Zone Tabletop Paging Station Dynamic Microphone

The RANE Zone Pager is a paging station that allows users to page up to (6) zones separately, to (2) groups of zones, and to all zones at the same time. Lights will indicate if the zone is READY or BUSY (already being paged by a higher-priority paging station) and when the chime has completed (if enabled).

Zone Pager accepts an included dynamic gooseneck microphone via a 3-pin XLR connector. The microphone input supplies 24V phantom power for condenser microphones. The Zone Pager is connected to a RANE DSP with a Cat5e (or better) cable on a local run up to 500ft (150m) away from the equipment rack.

Zone Pager is perfect for use in bar/lounge restaurants, meeting rooms, schools, house of worship, and smaller venues where multiple paging zones are needed.

Features:
Six-zone smart paging station
Two programmable group buttons
Gooseneck dynamic microphone included
Powered by any Rane DSP commercial processor via RJ-45
+24V phantom power and 13dB pad

What's in the Box:
Zone Pager
Microphone
Quick Start Guide
Safety & Warranty Manual

Specifications:
Frequency Response: 20Hz - 20kHz
Mic Input Impedance: 1.1kΩ
Max Input Level: Condenser mic max input -1dBu
Dynamic mic max input: -13dBu
Current Draw: 0.10 amps
Phantom Power: 24VDC
Connectors: RAD port RJ45 connector
Microphone: XLRF 3-pin
Gooseneck Microphone: Element Dynamic
Polar Pattern: Super-cardioid
Frequency Response: 100Hz - 15kHz
Sensitivity: -56dBv/pa (1.6mv/pa)
Max SPL: 135dB (THD ≤ 1% @ 1kHz)
Environmental: Operating temperature 32 - 104° F (0 - 40° C)
Dimensions
(width x depth x height): 7.9” x 2.2” x 6.4”           200 x 55 x 162mm
Weight: 1.7 lbs (0.776kg)

Rane DANTEX Interface Plug In Card for Terminal 1010X Processor

The DANTEx is an optional plug-in card for the Rane Terminal 1010x that allows system designers to integrate a Terminal 1010x processor with Dante-equipped microphones, amplifiers, breakout boxes, mixing consoles and other supported devices. It provides 32 inputs and 32 outputs of Dante digital audio with supported samples rates of 44.1kHz, 48kHz, 88.2kHz and 96kHz. Built-in sample rate conversion (SRC) converts the Dante sample rate to the fixed 48kHz sample rate required by the Terminal 1010x.

The Dante interface is managed using Audinate’s Dante Controller software. Dante controller is a free software application that enables the user to route and configure devices on a Dante network.

Features:
Provides 32 x 32 Dante™ connectivity for RANE Terminal 1010x
Supports 44.1kHz – 96kHz sample rates for connected devices
Built-in 48kHz sample rate converter (SRC)

What's in the Box
Installation Guide
Safety & Warranty Manual

Specifications:
Audinate Brooklyn II card
Dual-port Gigabit Ethernet switch
32 x 32 channel count @ 44.1kHz - 96kHz
Sample-rate conversion (SRC) for all incoming and outgoing signals
Operating Temperature: 0° - 45 C° (32° - 113° F)
Dimensions (height x width x depth): 0.9” x 5.19” x 3.37”   (22.86 x 131.83 x 85.60mm)

Rane DRZH Wall Mounted Digital Remote Level Control with Source Selector

The DRZH is a wall-mounted digital remote (DR) for use with all Rane multiprocessors, including the new Zonetech audio processor. The DRZH features source selection and level control through the use of a single knob. It has a sleek black glass design, and the OLED display is easy to read in any environment. Connect the DRZH to RANE DSP with a Cat5e (or better) cable for a local run up to 1000 ft (300m) away from the equipment rack.
Each DRZH may be installed onto a standard U.S. 1-gang electrical box.

Features:
Zonetech – Halogen Remote Audio Device
Level control
Source selection

What's in the box
DRZH
Mounting Screws
Safety & Warranty Manual
User Guide

Specifications:
Display:
1.1” x 0.6” / 26.7 x 15.5mm (width x height)
1.2” / 30.9mm (diagonal)
128 x 64 pixel resolution
Monochrome, white on black
Connectors: (1) Ethernet/RJ45 port
Power Connection: Ethernet/RJ45 port
Voltage: 24V
Consumption: 1.2W
Dimensions: (width x depth x height) 3.0” x 2.0” x 4.7” 75 x 50 x 120mm
Weight: 0.3 lb. 150g