Crown Power Amplifiers

Crown DCI2X1250 Two Channel 1250W @ 4Ω Analog Power Amplifier DriveCore Series

The DriveCore™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.

Features:

• TRUE RACK DENSITY – Power points of 300W or 600W in 2-/4-/8-channel configurations – all in a 2 Rack Unit form factor. More channels in one box allow smaller infrastructure rooms that can reduce operational costs while giving you the utmost in installation flexibility.

• DIRECT DRIVE CONSTANT VOLTAGE – Save money by using smaller gauge wiring to drive the speakers using either 70V rms or 100Vrms. With no need for a step-up transformer at the output, the DCi produces higher audio quality much more efficiently. 

• CHANNEL INDEPENDENT HI-Z/LOW-Z SELECTION – Drive either one or two speakers in low-Z mode, or literally hundreds of speakers in high-Z mode (70Vrms or 100Vrms). This means better design flexibility since DCi powers all loads on a channel-by-channel basis.

• BRIDGEABLE CHANNEL PAIRS – Unlike amps from other manufacturers, the DCi Series channels are bridgeable – even in 100Vrms mode – which means even more adaptability for higher power applications such as subwoofers.

• REMOTE ON/OFF INTERFACE – Save power by integrating the amplifier into a control system so you can easily turn it on and off.

• EFFICIENT COOLING DESIGN – Highly efficient internal cooling fans provide airflow to the most heat-generating parts. Incorporating the fans into the amplifier brick design maximizes cooling while minimizing wasted energy and noise.

• ADVANCED POWER FACTOR CORRECTION (PFC) UNIVERSAL POWER SUPPLY – The most advanced power supply in an installation amplifier delivers power more efficiently in almost any condition than anyone else, resulting in less power dissipated and less heat in your racks.

Crown XLI800 Two Channel, 300W @ 4Ω Power Stereo/ Parallel  Amplifier 

Powerful. Reliable. Affordable.

The XLI Series of power amplifiers from Crown® represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.

The four models in the series are the XLi800, XLi1500, XLi2500 and XLi3500. They are identical except for output power.

Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon® and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference.

With over six decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLI Series. They are a powerful argument for quality and value!

Specifications:

Frequency Response:       20 Hz - 20 kHz, +0/-1 dB (at 1 watt)

THD:                       <0.5%, 20 Hz - 20 kHz

Intermodulation Distortion: =/ <0.35% (60 Hz and 7 kHz at 4:1 from full rated ouput to -30 dB)

Slew Rate:   >10V/us

Voltage Gain: 29 dB

Damping Factor: (8 ohms, 10 Hz to 400 Hz) >200

Signal To Noise Ratio (A-weighted): >100 dB

Crosstalk (below rated power) 20 Hz to 1 kHz: -75 dB, -59 dB

Input Sensitivity: (for full rated power at 8 ohms) 0.775V or 1.4V

Input Impedance (nominal balanced, unbalanced): 20kΩ, 10kΩ

AC Line Voltage and Frequency Configurations Available: (+10%) 120V~60 Hz; 220V~50/60 Hz; 230-240V~50/60 Hz

Dimensions: 19" x 3.5" x 12.4" (48.3cm x 8.9cm x 31.5cm)

Weight: 25.1lbs (11.4kg)

IEC Power Connector: 15A

Features:

• Stereo/parallel/bridge-mono mode

• User selectable input sensitivity - 0.775V and 1.4V

• Electronically balanced RCA & XLR inputs; binding post and Speakon ® outputs

• Efficient forced-air cooling prevents excessive thermal buildup

• Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel

• Protection against shorts, no-load, on/off thumps and radio-frequency interference

Crown XLS1002 Two Channel 350W @ 4Ω Power Stereo Amplifier DriveCore 2 Series

Meet the new XLS DriveCore™ 2 Series

The next generation of XLS got a makeover with a sleek new look, a LCD display that is three times larger, and more DSP with higher capabilities. Like its predecessor, the new XLS is ultra-efficient with Crown’s patented DriveCore technology and can drive 2400W at 4Ω bridged with tons of headroom guaranteeing a clean, undistorted signal straight to your speakers. The XLS DriveCore 2 assures that you will be heard as you deliver a powerful, pure sound experience for any venue.

Features:

• Class D amp with Crown's ultra-efficient DriveCore technology weighs less than 11 lb (5 kg)

• Higher DSP capabilities: More control; has band pass filter per channel 

• Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues

• Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full power

• Set sleep mode after specified time without having to press a button

• Security setting disables menu buttons; menu locked/unlocked by entering combination

• System reset allows factory settings to be restored

• Remote power trigger

• Peakx™ Limiters provide maximum output while protecting your speakers

• XLR, 1/4", RCA inputs provide flexibility

• Integrated PureBand™ Crossover System for better performance and control

• Efficient forced-air fans prevent excessive thermal buildup 

----------------------------------------------------------------------------------------------------------------

Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998.  We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.   

Shipping --Items are well packed and shipped  USPS, UPS or  Freight Service.  Items purchased on Friday may not ship until Monday or until the projected processing period.  We are working hard to get your unit Built ( if needed), processed and shipped. Processing Times  do vary

Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.

Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches,  scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees & accessories or your return may be subject to a return handling charge.

Refunds are for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service/restocking fee. This item is now used and it would be unfair to resell to another customer as new. 

The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items,  electronic software downloads, demo gear, strings, computers, vacuum tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes & polishing cloths, software/sound ware, books, CDs, DVD's, vinyl records, and videos.

Crown XLS2002 Two Channel 650W @ 4Ω Power Stereo Amplifier DriveCore Series

Meet the new XLS DriveCore™ 2 Series

The next generation of XLS got a makeover with a sleek new look, a LCD display that is three times larger, and more DSP with higher capabilities. Like its predecessor, the new XLS is ultra-efficient with Crown’s patented DriveCore technology and can drive 2400W at 4Ω bridged with tons of headroom guaranteeing a clean, undistorted signal straight to your speakers. The XLS DriveCore 2 assures that you will be heard as you deliver a powerful, pure sound experience for any venue.

Specifications

Sensitivity           1.4Vrms

Frequency Response   +0dB, -1dB

Signal to Noise           >103dB (at .775Vrms, 6dB lower)

Intermodulation Distortion < 0.3%

Damping Factor      > 200

THD              < 0.5%

Crosstalk   At 1kHz: > 85dB, At 20kHz: > 55dB

Dimensions   19" (48.3 cm) x 3.5" (8.9 cm) x 10.7" (21.2 cm)

Weight           10.8 lbs (4.9 kgs)

Features

• Class D amp with Crown's ultra-efficient DriveCore technology weighs less than 11 lb 

• Higher DSP capabilities: More control; has band pass filter per channel 

• Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues

• Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full power

• Set sleep mode after specified time without having to press a button

• Security setting disables menu buttons; menu locked/unlocked by entering combination

• System reset allows factory settings to be restored

• Remote power trigger

• Peakx™ Limiters provide maximum output while protecting your speakers

• XLR, 1/4", RCA inputs provide flexibility

• Integrated PureBand™ Crossover System for better performance and control

• Efficient forced-air fans prevent excessive thermal buildup 

Crown DCI4X600 4 Channel 600W Analog Power Amplifier Compact & Energy Efficient

The DriveCore™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.

Features

• TRUE RACK DENSITY – Power points of 300W or 600W in 2-/4-/8-channel configurations – all in a 2 Rack Unit form factor. More channels in one box allow smaller infrastructure rooms that can reduce operational costs while giving you the utmost in installation flexibility.

• DIRECT DRIVE CONSTANT VOLTAGE – Save money by using smaller gauge wiring to drive the speakers using either 70V rms or 100Vrms. With no need for a step-up transformer at the output, the DCi produces higher audio quality much more efficiently. 

• CHANNEL INDEPENDENT HI-Z/LOW-Z SELECTION – Drive either one or two speakers in low-Z mode, or literally hundreds of speakers in high-Z mode (70Vrms or 100Vrms). This means better design flexibility since DCi powers all loads on a channel-by-channel basis.

• BRIDGEABLE CHANNEL PAIRS – Unlike amps from other manufacturers, the DCi Series channels are bridgeable – even in 100Vrms mode – which means even more adaptability for higher power applications such as subwoofers.

• REMOTE ON/OFF INTERFACE – Save power by integrating the amplifier into a control system so you can easily turn it on and off.

• EFFICIENT COOLING DESIGN – Highly efficient internal cooling fans provide airflow to the most heat-generating parts. Incorporating the fans into the amplifier brick design maximizes cooling while minimizing wasted energy and noise.

• ADVANCED POWER FACTOR CORRECTION (PFC) UNIVERSAL POWER SUPPLY – The most advanced power supply in an installation amplifier delivers power more efficiently in almost any condition than anyone else, resulting in less power dissipated and less heat in your racks.

Specifications

Frequency Response (8Ω, 20Hz - 20kHz): ±0.25dB

Signal To Noise Ratio (A-weighted): >108dB

Total Harmonic Distortion (at full rated power, 20Hz - 20kHz): 0.35%

Voltage Gain: 34dB

Damping Factor (20Hz to 100Hz): >1000

Input Impedance (nominal balanced, unbalanced): 10kΩ, 5kΩ

Maximum Input Level before Compression: +20dBu

Maximum Input Level before Clipping: +26dBu

Load Impedance (Stereo/Dual Mode): 2Ω - 16Ω; 70Vrms and 100Vrms

Load Impedance Bridge Mono: 4Ω - 16Ω; 140Vrms and 200Vrms

Cooling: Continuously variable speed forced air, front to back airflow

Maximum Fan Noise (re dBA SPL @ 1M): 45

Required AC Mains (±10%): 100V-240V ~ 50/60Hz

Power Connector: 15A IEC

Dimensions: 19" x 3.5" x 14.25" (48.3cm x 8.9cm x 35.63cm)

Weight: 20.1lbs (9.12kg)

Crown XTI1002 2 Channel 500W DSP Power Amplifier Crossover Limiter Rackmountable

There's no debate – when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat.

Input EQ

6 parametric filters per channel with adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving filters. This 8-filter EQ section can be bypassed.

Crossover Filters

Highpass and Lowpass per channel. Butterworth 6/12/18/24 dB per octave. Linkwitz-Riley 24/48 dB per Octave. Also includes ± 15 dB bandpass gain and polarity control.

Output EQ

8 parametric filters per channel with adjustable Q, ±15 dB boost/cut. This 8-filter EQ section can be bypassed.

Delay

For signal alignment of driver; 50 mS of total delay.

SubHarmonic Synth

Takes the low-frequency content of the input signal and "synthesizes" a new signal that is the same as the input signal but one octave lower. The new synthesized signal is then mixed with the original signal to create the effect. New: Users now have control over frequency, gain, and filter type.

Features

• Peakx Plus™ Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release

• Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning

• 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application

• New system monitoring provides software visibility of AC line voltage and power supply temperature

• Integrated cast-aluminum handles for easy handling and enhanced durability

• Locking power cord clip provides a secure connection between the amplifier and power cord

• Updated HiQnet System Architect™ control software

• Increased number of presets to a total of 50; 49 of which are user definable

Specifications

Channels: 2

Sensitivity: 1.4V

Rated Power Output (per channel): 700W 2Ω, 500W 4Ω, 275W 8Ω

Signal to Noise Ratio (below rated 1 kHz power at 8 ohms): 100 dB (A-weighted)

THD: < 0.5%

Frequency Response (at 1W, 20 Hz - 20 kHz): + 0 dB, -1 dB

Crosstalk (below rated power) 20 Hz to 1 kHz: >70 dB

Dimensions: 3.5" x 19" x 12.25"

Weight: 18.5 lbs (8.4 kg)

Shipping Weight: 21.5 lbs (9.8 kg)

IEC Power Connector: 15A

----------------------------------------------------------------------------------------------------------------

Echotone Music LLC is an experienced E-commerce Audio & Musical instrument dealer since 1998.  We take pride in selling quality gear for musicians, sound engineers, production companies and broadcast applications.   

Shipping --Items are well packed and shipped  USPS, UPS or Pallet Freight Service.  Items purchased on Friday may not ship until Monday or until the projected processing period.  We are working hard to get your unit Built ( if needed), processed and shipped.

Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.

Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches,  scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees & accessories or your return may be subject to a return handling charge.

Refunds or for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new. 

The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items,  electronic software downloads, demo gear, strings, reeds, computers, tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes & polishing cloths, software/soundware, books, CDs, DVD's, vinyl records, and videos.

Happy customers, that's music to our ears!

Crown XLI1500 Two-channel 450W @ 4Ω Stereo/ Parallel Power Amplifier 

Powerful. Reliable. Affordable.

The XLI Series of power amplifiers from Crown® represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.

The four models in the series are the XLi800, XLi1500, XLi2500 and XLi3500. They are identical except for output power.

Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon® and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference.

With over six decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLI Series. They are a powerful argument for quality and value!

Specifications:

Frequency Response:       20 Hz - 20 kHz, +0/-1 dB (at 1 watt)

THD:                                      <0.5%, 20 Hz - 20 kHz

Intermodulation Distortion; =/ <0.35% (60 Hz and 7 kHz at 4:1 from full rated ouput to -30 dB)

Slew Rate:                         >10V/us

Voltage Gain:                          31 dB

Damping Factor:               (8 ohms, 10 Hz to 400 Hz) >200

Signal To Noise Ratio (A-weighted): >100 dB

Crosstalk (below rated power) 20 Hz to 1 kHz:    -75 dB, -59 dB

Input Sensitivity:       (for full rated power at 8 ohms) 0.775V or 1.4V

Input Impedance (nominal balanced, unbalanced) :  20kΩ, 10kΩ

AC Line Voltage and Frequency Configurations Available:    (+10%) 120V~60 Hz; 220V~50/60 Hz; 230-240V~50/60 Hz

Dimensions:      19" x 3.5" x 12.4" (48.3cm x 8.9cm x 31.5cm)

Weight:                  28lbs (12.7kg)

IEC Power Connector: 15A

Features:

• Stereo/parallel/bridge-mono mode

• User selectable input sensitivity - 0.775V and 1.4V

• Efficient forced-air cooling prevents excessive thermal buildup

• Electronically balanced RCA & XLR inputs; binding post and Speakon ® outputs

• Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel

• Protection against shorts, no-load, on/off thumps and radio-frequency interference

Crown XTI6002 Two-channel, 2100 watt 4Ω Stereo Power Amplifier 

Ships Free!

There's no debate – when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat.

Features

Peakx Plus™ Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release

Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning

3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application

New system monitoring provides software visibility of AC line voltage and power supply temperature

Integrated cast-aluminum handles for easy handling and enhanced durability

Locking power cord clip provides a secure connection between the amplifier and power cord

Updated HiQnet System Architect™ control software

Increased number of presets to a total of 50; 49 of which are user definable

Specifications

Channels 2

Sensitivity 1.4V

Rated Power Output (per channel) 3000W 2Ω, 2100W 4Ω, 1200W 8Ω

Signal to Noise Ratio (below rated 1 kHz power at 8 ohms) 103 dB (A-weighted)

THD < 0.5%

Frequency Response (at 1W, 20 Hz - 20 kHz) + 0 dB, -1 dB

Crosstalk (below rated power) 20 Hz to 1 kHz >70 dB

Dimensions 3.5" x 19" x 16.2"

Weight 24 lbs (10.9 kg)

Shipping Weight 30 lbs (13.6 kg)

IEC Power Connector 20A

Ships Direct to you by Authorized Dealer!  Always Fresh Stock!

Crown DCI4X300 DriveCore Analog Power Amplifier with Blue Link 4 Ch 300w 

6 Year Warranty!

Ships Free!

The new DriveCore install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology. This amplifier is EN 54-16 Compliant for life safety applications. 

Power Output Dual Mode all Channels Driven

2ohmn -150w

4ohm- 300w

8ohm-300w

16ohmn-300w

Bridged mode -All channels driven

4ohm -300w

8ohm-600w

16ohm-600w

Features

ANALOG & DIGITAL INPUTS – With digital audio transport via HARMAN’s proprietary BLU-Link, plus balanced analog inputs, DCi gives you a tremendous audio advantage – at a much lower cost. The priority input router allows you to specify a primary input, and if audio is lost the amp automatically switches to the other input.

NETWORK MONITORING & CONTROL – Better monitoring, control and audio manipulation with the HiQnet™ protocol that’s over standard TCP/IP. Remotely see how all networked DCi amplifiers are performing and control them as needed. In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers.

PROGRAMMABLE GENERAL PURPOSE INPUT/OUTPUT PORTS – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer.

DIGITAL SIGNAL PROCESSING – DSP capabilities include the following:

LevelMAX Limiters

Input/Output EQ

Delay

Matrix Mixer

Speaker Line Monitoring

EN 54-16 Compliant for Life Safety Applications - Part 16 of the European Union’s (EU) EN 54 standard for fire detection and alarm systems has a specific requirement for voice alarms, which output messages in the form of a voice message rather than a traditional siren. This amplifier is certified as part of an EN 54-16 VACIE*, meeting the stringent requirements of a life safety system to serve the needs of hospitality, large venue and other markets.

Specifications

Frequency Response (8Ω, 20Hz - 20kHz) ±0.25dB

BLU Link Input Signal to Noise Ratio (A-Weighted) >104dB

Total Harmonic Distortion (at full rated power, 20Hz - 20kHz) 0.35%

Voltage Gain 34dB

Damping Factor (20Hz to 100Hz) >1000

Input Impedance (nominal balanced, unbalanced) 10kΩ, 5kΩ

Maximum Input Level before Compression +20 dBu

Load Impedance (Stereo/Dual Mode) 2Ω - 16Ω; 70Vrms and 100Vrms

Load Impedance Bridge Mono 4Ω - 16Ω; 140Vrms and 200Vrms

Cooling Continuously variable speed forced air, front to back airflow

Maximum Fan Noise (re dBA SPL @ 1M) 45

Required AC Mains (±10%) 100V-240V ~ 50/60Hz

Power Connector 15A IEC

Dimensions 19" x 3.5" x 14.25" (48.3cm x 8.9cm x 35.63cm)

Weight 20.1lbs (9.12kg)

-----------------------------------------------------------------------------------------

Echo tone Music is a long time E-commerce Audio and Musical instrument dealer since 1998.  We take pride in selling quality gear for musicians, sound engineers and broadcast applications.   

Shipping --Items are well packed and shipped  USPS, UPS or Pallet Freight Service.  Items purchased on Friday may not ship until Monday or until the projected processing period.  We are working hard to get your unit Built ( if needed), processed and shipped.

Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.

Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as belt-buckle or pick scratches, scuffs, dings or scrapes, screw mount marks or collateral materials. Items must also include all original packaging, manuals, warrantees and accessories or your return may be subject to a return handling charge.

If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new. 

The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items,  electronic software downloads, demo gear, strings, reeds, computers, tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, body jewelry, sheet music, cleaners, polishes and polishing cloths, software/soundware, books, CDs, DVD's, vinyl records, and videos.

Happy customers, that's music to our ears!

Crown DCI2X300 Pro 300w 2-channel Drive Core Install Network Amplifier

Ships free

Two-channel, 300W @ 4Ω Power Amplifier with BLU link, 70V/100V / EN 54-16 Compliant for Life Safety Applications

The new DriveCore install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology. This amplifier is EN 54-16 Compliant for life safety applications. 

Features

ANALOG & DIGITAL INPUTS – With digital audio transport via HARMAN’s proprietary BLU-Link, plus balanced analog inputs, DCi gives you a tremendous audio advantage – at a much lower cost. The priority input router allows you to specify a primary input, and if audio is lost the amp automatically switches to the other input.

NETWORK MONITORING & CONTROL – Better monitoring, control and audio manipulation with the HiQnet™ protocol that’s over standard TCP/IP. Remotely see how all networked DCi amplifiers are performing and control them as needed. In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers.

PROGRAMMABLE GENERAL PURPOSE INPUT/OUTPUT PORTS – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer.

DIGITAL SIGNAL PROCESSING – DSP capabilities include the following:

LevelMAX Limiters

Input/Output EQ

Delay

Matrix Mixer

Speaker Line Monitoring

EN 54-16 Compliant for Life Safety Applications - Part 16 of the European Union’s (EU) EN 54 standard for fire detection and alarm systems has a specific requirement for voice alarms, which output messages in the form of a voice message rather than a traditional siren. This amplifier is certified as part of an EN 54-16 VACIE*, meeting the stringent requirements of a life safety system to serve the needs of hospitality, large venue and other markets.

Dual Mode

2ohm-150w

4ohm-300w

8ohm-300w

16ohm-300w

70vRMS-300w

100VRMS-300W

Bridge Mode

4ohm-300w

8ohm-600w

16ohm-600

140VRMS-600w

200VRMS-600w

____________________________________________________________________________

Echo tone Music is a long time E-commerce Audio and Musical instrument dealer since 1998.  We take pride in selling quality gear for musicians, sound engineers and broadcast applications.   

Shipping --Items are well packed and shipped  USPS, FEDEX and UPS.  Items purchased on Friday may not ship until monday or until the projected processing period..  We want to get your item out as fast as we can.   

Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs. Refunds are for the product price only and will be less all shipping charges and 10% return Service Charge as we have to pay people to process and inspect all returns.

If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new. 

Happy customers, that's music to our ears!

Crown XLC2500 2 Channel 500 watt Cinema Power Amplifier 6yr Warranty

Ships Free!

The XLC2500 incorporate Crown’s proprietary DriveCore™ Technology, which significantly reduces the amplifiers’ size, while yielding much more energy efficient operation – without sacrificing performance. Compact, powerful and cost-effective, the XLC Series provides ease of installation, outstanding sound quality and the unwavering reliability inherent in every Crown product. These amplifiers are powerful, affordable options for both the cinema and install markets.

Features

Some important features for cinema applications:

XLC2500 500W per channel at 4-ohms

XLC Amplifiers are compatible with CXM2000 for monitor, fault detection and crossover functions

XLC Amplifiers are compatible with Crown Monitor System DSi-8M for monitor function

Power for 2-ohm, 4-ohm and 8-ohm outputs, supporting stereo and bridge outputs

Support parallel connection of cinema surround speaker

Indicators provide accurate diagnostics: Power, Signal, Clip and Fault

Volume control on rear panel of amplifiers

High performance, light weight

DriveCore  based amplifier – weighs less than 14lbs (6 kgs)

6 Year warranty on Register Crown Products

Some important features for install applications:

Minimal front panel control; block connectors and controls on back of amplifiers

High performance lightweight DriveCore based amplifier for audiophile quality and extremely high reliability

Configurable input operation for stereo and parallel and bridge modes

Configurable output operation for stereo and bridge modes

2 channel Power amplifier 

2ohm 775w

4ohm 500w

4ohm bridged 1550

8ohm 300w

8ohm bridged 1000w

Specifications

AC Line Voltage and Frequency Configurations Available (+/- 10%) 100VAC 50/60 Hz, 110VAC 60 Hz, 220 and 230~240VAC 50 Hz

Voltage Gain 35

Sensitivity 1.4V (for full rated power at 4 ohms)

Signal to Noise Ratio (ref. rated power, 8 ohms, 1 kHz) > 103 dB

THD <0.5%

Damping Factor (8 ohms, 10 Hz to 400 Hz) >200

Intermodulation Distortion (from full rated output to -30 dB) <0.3%

Frequency Response (at 1W, 20 Hz - 20 kHz) 0 dB

Crosstalk >85 dB (below rated 8 ohms power, at 1 kHz); >55 dB (below rated 8 ohms power, at 20 kHz)

Input Impedance (nominal) 20 kilohms balanced, 10 kilohms unbalanced

Load Impedance 2~8 ohms per channel in Stereo; 4~8 ohms in Bridge

Dimensions 19" x 3.5" x 8" (48.3cm x 8.9cm x 20.6cm)

Weight 8.3 lbs (3.75 kg)

Shipping Weight 10.7 lbs (4.85 kg)

IEC Power Connector 15A

Support/FAQs

----------------------------------------------------------------------------------------------------------------

Echotone Music LLC is an experienced  long time E-commerce Audio & Musical instrument dealer since 1998.  We take pride in selling quality gear for musicians, sound engineers, production companies and broadcast applications.   

Shipping --Items are well packed and shipped  USPS, UPS or Pallet Freight Service.  Items purchased on Friday may not ship until Monday or until the projected processing period.  We are working hard to get your unit Built ( if needed), processed and shipped.

Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.

Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches,  scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees & accessories or your return may be subject to a return handling charge.

Refunds or for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new. 

The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items,  electronic software downloads, demo gear, strings, reeds, computers, tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes & polishing cloths, software/soundware, books, CDs, DVD's, vinyl records, and videos.

Happy customers, that's music to our ears!

Crown DCI8X300 8 Channel Analog Power Amplifier 300W Remote Interface 100V

The DriveCore™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.

Features:

• TRUE RACK DENSITY – Power points of 300W or 600W in 2-/4-/8-channel configurations – all in a 2 Rack Unit form factor. More channels in one box allow smaller infrastructure rooms that can reduce operational costs while giving you the utmost in installation flexibility.

• DIRECT DRIVE CONSTANT VOLTAGE – Save money by using smaller gauge wiring to drive the speakers using either 70V rms or 100Vrms. With no need for a step-up transformer at the output, the DCi produces higher audio quality much more efficiently. 

• CHANNEL INDEPENDENT HI-Z/LOW-Z SELECTION – Drive either one or two speakers in low-Z mode, or literally hundreds of speakers in high-Z mode (70Vrms or 100Vrms). This means better design flexibility since DCi powers all loads on a channel-by-channel basis.

• BRIDGEABLE CHANNEL PAIRS – Unlike amps from other manufacturers, the DCi Series channels are bridgeable – even in 100Vrms mode – which means even more adaptability for higher power applications such as subwoofers.

• REMOTE ON/OFF INTERFACE – Save power by integrating the amplifier into a control system so you can easily turn it on and off.

• EFFICIENT COOLING DESIGN – Highly efficient internal cooling fans provide airflow to the most heat-generating parts. Incorporating the fans into the amplifier brick design maximizes cooling while minimizing wasted energy and noise.

• ADVANCED POWER FACTOR CORRECTION (PFC) UNIVERSAL POWER SUPPLY – The most advanced power supply in an installation amplifier delivers power more efficiently in almost any condition than anyone else, resulting in less power dissipated and less heat in your racks.

Specifications:

Output Channels: 8

Frequency Response (8Ω, 20Hz - 20kHz): ±0.25dB

Total Harmonic Distortion (at full rated power, 20Hz - 20kHz): 0.35%

Damping Factor (20Hz to 100Hz): >1000

Load Impedance (Stereo/Dual Mode): 2Ω - 16Ω; 70Vrms and 100Vrms

Load Impedance Bridge Mono: 4Ω - 16Ω; 140Vrms and 200Vrms

Cooling: Continuously variable speed forced air, front to back airflow

Maximum Fan Noise (re dBA SPL @ 1M): 47

Required AC Mains (±10%): 100V-240V ~ 50/60Hz

Power Connector: 15A IEC

Dimensions (W x H x D): 483 mm x 89 mm x 362 mm

                                19 in x 3.5 in x 14.25 in

Weight: 10.66 kg (23.5 lbs)

Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998.  We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.   

Shipping --Pro packed & shipped  USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed &  shipped. Processing times vary, 2-30  days

Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new. 

What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items,  electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids

Crown DCI2X600N Two Channel 600 Watts Drivecore Power Amplifier with BLU link

The DriveCore™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology. This amplifier is EN 54-16 Compliant for life safety applications.

Features:

• ANALOG & DIGITAL INPUTS – With digital audio transport via HARMAN’s proprietary BLU-Link, plus balanced analog inputs, DCi gives you a tremendous audio advantage – at a much lower cost. The priority input router allows you to specify a primary input, and if audio is lost the amp automatically switches to the other input.

• NETWORK MONITORING & CONTROL – Better monitoring, control and audio manipulation with the HiQnet™ protocol that’s over standard TCP/IP. Remotely see how all networked DCi amplifiers are performing and control them as needed. In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers.

• PROGRAMMABLE GENERAL PURPOSE INPUT/OUTPUT PORTS – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer.

• DIGITAL SIGNAL PROCESSING – DSP capabilities include the following:

LevelMAX Limiters
Input/Output EQ
Crossover
Delay
Matrix Mixer
Speaker Line Monitoring

• EN 54-16 Compliant for Life Safety Applications - Part 16 of the European Union’s (EU) EN 54 standard for fire detection and alarm systems has a specific requirement for voice alarms, which output messages in the form of a voice message rather than a traditional siren. This amplifier is certified as part of an EN 54-16 VACIE*, meeting the stringent requirements of a life safety system to serve the needs of hospitality, large venue and other markets.

Specifications:

Output Channels: 2

Frequency Response (8Ω, 20Hz - 20kHz): ±0.25dB

Total Harmonic Distortion (at full rated power, 20Hz - 20kHz): 0.35%

Damping Factor (20Hz to 100Hz): >1000

Load Impedance (Stereo/Dual Mode): 2Ω - 16Ω; 70Vrms and 100Vrms

Load Impedance Bridge Mono: 4Ω - 16Ω; 140Vrms and 200Vrms

Cooling: Continuously variable speed forced air, front to back airflow

Maximum Fan Noise (re dBA SPL @ 1M): 45

Required AC Mains (±10%): 100V-240V ~ 50/60Hz

Power Connector: 15A IEC

Dimensions (W x H x D): 483 mm x 89 mm x 362 mm

19 in x 3.5 in x 14.25 in

Weight: 8.53 kg (18.8 lbs)

Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998.  We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.   

Shipping --Pro packed & shipped  USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed &  shipped. Processing times vary, 2-30  days

Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new. 

What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items,  electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids

Crown DCI2X600 Two Channel 600 Watts Drivecore Analog Power Amplifier 4 Ohms

The DriveCore™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.

Features:

• TRUE RACK DENSITY – Power points of 300W or 600W in 2-/4-/8-channel configurations – all in a 2 Rack Unit form factor. More channels in one box allow smaller infrastructure rooms that can reduce operational costs while giving you the utmost in installation flexibility.

• DIRECT DRIVE CONSTANT VOLTAGE – Save money by using smaller gauge wiring to drive the speakers using either 70V rms or 100Vrms. With no need for a step-up transformer at the output, the DCi produces higher audio quality much more efficiently. 

• CHANNEL INDEPENDENT HI-Z/LOW-Z SELECTION – Drive either one or two speakers in low-Z mode, or literally hundreds of speakers in high-Z mode (70Vrms or 100Vrms). This means better design flexibility since DCi powers all loads on a channel-by-channel basis.

• BRIDGEABLE CHANNEL PAIRS – Unlike amps from other manufacturers, the DCi Series channels are bridgeable – even in 100Vrms mode – which means even more adaptability for higher power applications such as subwoofers.

• REMOTE ON/OFF INTERFACE – Save power by integrating the amplifier into a control system so you can easily turn it on and off.

• EFFICIENT COOLING DESIGN – Highly efficient internal cooling fans provide airflow to the most heat-generating parts. Incorporating the fans into the amplifier brick design maximizes cooling while minimizing wasted energy and noise.

• ADVANCED POWER FACTOR CORRECTION (PFC) UNIVERSAL POWER SUPPLY – The most advanced power supply in an installation amplifier delivers power more efficiently in almost any condition than anyone else, resulting in less power dissipated and less heat in your racks.

Specifications:

Output Channels: 2

Frequency Response (8Ω, 20Hz - 20kHz): ±0.25dB

Total Harmonic Distortion (at full rated power, 20Hz - 20kHz): 0.35%

Damping Factor (20Hz to 100Hz): >1000

Load Impedance (Stereo/Dual Mode): 2Ω - 16Ω; 70Vrms and 100Vrms

Load Impedance Bridge Mono: 4Ω - 16Ω; 140Vrms and 200Vrms

Cooling: Continuously variable speed forced air, front to back airflow

Maximum Fan Noise (re dBA SPL @ 1M): 45

Required AC Mains (±10%): 100V-240V ~ 50/60Hz

Power Connector: 15A IEC

Dimensions (W x H x D): 483 mm x 89 mm x 362 mm

19 in x 3.5 in x 14.25 in

Weight: 8.53 kg (18.8 lbs)

Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998.  We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.   

Shipping --Pro packed & shipped  USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed &  shipped. Processing times vary, 2-30  days

Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new. 

What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items,  electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids

Crown XLI2500 Series Two Channel 750 Watts Audio Power Amplifier 4 Ohms

The XLI Series of power amplifiers from Crown® represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.

The four models in the series are the XLi800, XLi1500, XLi2500 and XLi3500. They are identical except for output power.

Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon® and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference.

With over six decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLI Series. They are a powerful argument for quality and value!

Features:

• Stereo/parallel/bridge-mono mode

• User selectable input sensitivity - 0.775V and 1.4V

• Efficient forced-air cooling prevents excessive thermal buildup

• Electronically balanced RCA & XLR inputs; binding post and Speakon ® outputs

• Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel

• Protection against shorts, no-load, on/off thumps and radio-frequency interference

Specifications:

Frequency Response: 20 Hz - 20 kHz, +0/-1 dB (at 1 watt)

THD: <0.5%, 20 Hz - 20 kHz

Intermodulation Distortion: =/ <0.35% (60 Hz and 7 kHz at 4:1 from full rated output to -30 dB)

Slew Rate: >10V/us

Voltage Gain: 33 dB

Damping Factor: (8 ohms, 10 Hz to 400 Hz) >200

Signal To Noise Ratio (A-weighted): >100 dB

Crosstalk (below rated power) 20 Hz to 1 kHz: -75 dB, -59 dB

Input Sensitivity: (for full rated power at 8 ohms) 0.775V or 1.4V

Input Impedance (nominal balanced, unbalanced): 20kΩ, 10kΩ

AC Line Voltage and Frequency Configurations Available: (+10%) 120V~60 Hz; 220V~50/60 Hz; 230-240V~50/60 Hz

Dimensions: 19" x 3.5" x 12.4" (48.3cm x 8.9cm x 31.5cm)

Weight: 29.7lbs (13.5kg)

IEC Power Connector: 15A

Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998.  We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.   

Shipping --Pro packed & shipped  USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed &  shipped. Processing times vary, 2-30  days

Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new. 

What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items,  electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids

Crown IT4X3500HDB HD Series 4 Channel Power Amplifier 4000 Watts at 4 Ohm USB

The I-Tech 4x3500HD amplifier is the industry's first high-powered tour sound amplifier featuring four inputs, Analog, AES3, and CobraNet™, fully routable to any one of 4 outputs.  Each channel features a complete compliment of OMNIDRIVEHD™ Processing, including the acclaimed LevelMAX™ Limiter Suite, and support for linear phase FIR filters as used in the latest JBL V5 loudspeaker tunings.  Combine that with Crown's patented Class-I technology delivering uncompromising power output across all four channels, and it's easy to see why the I-Tech 4x3500HD is the flagship tour sound amplifier from Crown.

Features-

More Flexibility

• True Ethernet backbone – fast, reliable and scalable

• Color LCD provides users with diagnostics and presets for easy setup

• Includes SLM (Sweep Load Monitoring) with system-level diagnostics

• Front panel USB connector transfers presets to/from a USB drive to the amp’s DSP

• New software interface based on customer feedback manages presets, provides easier system-level changes, and includes a configuration wizard

• The only product available with analog, AES, CobraNet®, HiQnet™ and Ethernet connectivity

No Compromise

• BSS OMNIDRIVEHD™ DSP processing with industry leading IIR filters and linear phase FIR filters

• High common-mode rejection eliminates hum and RFI on input cables

• Professional-grade connectors for all inputs and outputs

• Full power-supply voltage is always available, allowing instantaneous power on demand

• Quality-graded components let you safely drive the amplifier harder

• More total capacitance provides tremendous energy reserves for power bursts

No Comparison

• The only tour sound amplifier that provides four routable inputs to any output (analog, AES, VDrive,or CobraNet)

• LevelMAX™ peak voltage and RMS power limiters communicate with each other, resulting in smooth and accurate response, better sound

• Sixth generation patented Class-I (BCA®) circuitry couples power efficiently to the load and provides low AC current draw

• Global Power Supply; universal AC input accepts 100-240VAC, 50/60 Hz (±15%)

Specifications-

Channels-      4 inputs, 4 outputs (Analog, AES 3, VDrive, CobraNet)

Sensitivity-   Adjustable in 0.1dB increments from 1.28Vrms to 8Vrms

Damping Factor-     >5000

Signal to Noise Ratio-        ≥108dB

THD (full rated power, 20 Hz - 20 kHz)- 0.35%

Frequency Response-        ±0.25dB

Intermodulation Distortion (from 0 dB down to -40 dB)-   0.06%

Crosstalk-      >80dB

Common Mode Rejection-          >80dB typical

Power Connector-  32A PowerCON

Dimension (HxWxD)-       

89mm x 483mm x 431mm

3.5in x 19in x 16.9in

Net Weight- 13.2kg (29lbs)

Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998.  We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.   

Shipping -Pro packed & shipped  USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed &  shipped. Processing times vary, 2-30  days

Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new. 

What products can not be returned? - International Sales Clearance items, Custom Builds, Road Cases, DT12 items, items identified as non-returnable, discontinued items, used or NOS items,  electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, turntable cartridges, fog fluid

Crown DCI4X1250 4 Channel 1250 Watts at 4Ω Power Amplifier with BLU Link

The DriveCore™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.

Features-

• ANALOG & DIGITAL INPUTS – With digital audio transport via HARMAN’s proprietary BLU-Link, plus balanced analog inputs, DCi gives you a tremendous audio advantage – at a much lower cost. The priority input router allows you to specify a primary input, and if audio is lost the amp automatically switches to the other input.

• NETWORK MONITORING & CONTROL – Better monitoring, control and audio manipulation with the HiQnet™ protocol that’s over standard TCP/IP. Remotely see how all networked DCi amplifiers are performing and control them as needed. In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers.

• PROGRAMMABLE GENERAL PURPOSE INPUT/OUTPUT PORTS – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer.

• DIGITAL SIGNAL PROCESSING – DSP capabilities include the following-

• LevelMAX Limiters

• Input/Output EQ

• Crossover

• Delay

• Matrix Mixer

• Speaker Line Monitoring

Specifications-

Output Channels-   4

Frequency Response (8Ω, 20Hz - 20kHz)-       ±0.25dB

Total Harmonic Distortion (at full rated power, 20Hz - 20kHz)-    0.35%

Damping Factor (20Hz to 100Hz)-         >1500

Load Impedance (Stereo/Dual Mode)- 2Ω - 16Ω; 70Vrms and 100Vrms

Load Impedance Bridge Mono-  4Ω - 16Ω; 140Vrms and 200Vrms

Cooling-         Continuously variable speed forced air, front to back airflow

Maximum Fan Noise (re dBA SPL @ 1M)-       47

Required AC Mains (±10%)-        100V-240V ~ 50/60Hz

Power Connector-  20A IEC

Dimensions (W x H x D)-  

483 mm x 89 mm x 432 mm

19 in x 3.5 in x 17 in

Weight-         13.60 kg (30 lbs)

Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998.  We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.   

Shipping -Pro packed & shipped  USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed &  shipped. Processing times vary, 2-30  days

Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new. 

What products can not be returned? - International Sales Clearance items, Custom Builds, Road Cases, DT12 items, items identified as non-returnable, discontinued items, used or NOS items,  electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, turntable cartridges, fog fluid

Crown CDI4000 2 Channel CDi Series Power Amplifier 1200 Watts at 4Ω DSP USB

The 2 RU rack-mountable Crown Audio CDi 4000 is a rugged, lightweight commercial power amplifier designed for dual-channel or bridge-mono operation in installed audio applications such as restaurants, retail stores, warehouses, offices, and more. The CDi 4000 provides accurate, uncolored sound with low distortion for excellent music and vocal reproduction. It delivers 1200W per channel at 4 Ohms, and supports multiple low-impedance configurations, as well as 70V and 140V constant-voltage systems.

Features-

• Extremely versatile; rated for 2-, 4-, 8-ohm loads and 70V and 140V outputs.

• Switch-mode universal power supply.

• Intuitive front-panel LCD screen for quick, easy configuration.

• Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting.

• Up to 20 user defined DSP presets are available.

Specifications-

Channels-      2

Sensitivity (for full rated power at 8 ohms)-   1.4V

Rated Power Output (per channel @ 4 ohms)-          1200W Stereo

Signal to Noise Ratio (below rated 1 kHz power at 8 ohms)-         100 dB (A-weighted)

THD-   < 0.5%

Damping Factor (20 Hz to 400 Hz)-       > 500

Frequency Response (at 1W, 20 Hz - 20 kHz)- + 0 dB, -1 dB

Crosstalk (below rated power) 20 Hz to 1 kHz-          >70 dB

Input Impedance (nominal)-       20k ohms balanced, 10k ohms unbalanced

Dimensions- 3.5" x 19" x 12.25"

Weight-         22.0 lbs

IEC Power Connector-       15A

Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998.  We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.   

Shipping -Pro packed & shipped  USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed &  shipped. Processing times vary, 2-30  days

Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new. 

What products can not be returned? - International Sales Clearance items, Custom Builds, Road Cases, DT12 items, items identified as non-returnable, discontinued items, used or NOS items,  electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, turntable cartridges, fog fluid

Crown XTI2002 2 Channel 800 Watts at 4Ω Series Power Amplifier with DSP

The Crown XTi 2002 Power Amplifier delivers up to 475W per channel at 8 ohms and is an ideal solution for sound reinforcement, nightclub installation, bands, theaters, DJ applications and much more. The XTi 2002 offers highly accurate sound reproduction with very low distortion, perfect for music or voice playback.

There's no debate – when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat

Features-

• Peakx Plus™ Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release

• Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning

• 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application

• New system monitoring provides software visibility of AC line voltage and power supply temperature

• Integrated cast-aluminum handles for easy handling and enhanced durability

• Locking power cord clip provides a secure connection between the amplifier and power cord

• Updated HiQnet System Architect™ control software

• Increased number of presets to a total of 50; 49 of which are user definable

Specifications-

Channels-      2

Sensitivity-   1.4V

Rated Power Output (per channel)-      1000W 2Ω, 800W 4Ω, 475W 8Ω

Signal to Noise Ratio (below rated 1 kHz power at 8 ohms)-         100 dB (A-weighted)

THD-   < 0.5%

Frequency Response (at 1W, 20 Hz - 20 kHz)- + 0 dB, -1 dB

Crosstalk (below rated power) 20 Hz to 1 kHz-          >70 dB

Dimensions- 3.5" x 19" x 12.25"

Weight-         18.5 lbs (8.4 kg)

Shipping Weight-    21.5 lbs (9.8 kg)

IEC Power Connector-       15A

Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998.  We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.   

Shipping -Pro packed & shipped  USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed &  shipped. Processing times vary, 2-30  days

Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new. 

What products can not be returned? - International Sales Clearance items, Custom Builds, Road Cases, DT12 items, items identified as non-returnable, discontinued items, used or NOS items,  electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, turntable cartridges, fog fluid

Crown XLI3500 2 Channel Audio Stereo Power Amplifier 1350 Watts at 4ohm

The XLI Series of power amplifiers from Crown® represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.

Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon® and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference.

With over six decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLI Series. They are a powerful argument for quality and value!

Features-

• Stereo/parallel/bridge-mono mode

• User selectable input sensitivity - 0.775V and 1.4V

• Efficient forced-air cooling prevents excessive thermal buildup

• Electronically balanced RCA & XLR inputs; binding post and Speakon outputs

• Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel

• Protection against shorts, no-load, on/off thumps and radio-frequency interference

Specifications-

Frequency Response-        20 Hz - 20 kHz, +0/-1 dB (at 1 watt)

THD-   <0.5%, 20 Hz - 20 kHz

Intermodulation Distortion-       =/ <0.35% (60 Hz and 7 kHz at 4-1 from full rated ouput to -30 dB)

Slew Rate-    >10V/us

Voltage Gain-           36 dB

Damping Factor-     (8 ohms, 10 Hz to 400 Hz) >200

Signal To Noise Ratio (A-weighted)-      >100 dB

Crosstalk (below rated power) 20 Hz to 1 kHz-          -75 dB, -59 dB

Input Sensitivity-    (for full rated power at 8 ohms) 0.775V or 1.4V

Input Impedance (nominal balanced, unbalanced)- 20kΩ, 10kΩ

AC Line Voltage and Frequency Configurations Available-  (+10%) 120V~60 Hz; 220V~50/60 Hz; 230-240V~50/60 Hz

Dimensions- 19" x 3.5" x 14.4" (48.3cm x 8.9cm x 36.6cm)

Weight-         43lbs (19.5kg)

IEC Power Connector-       15A

Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998.  We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.   

Shipping -Pro packed & shipped  USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed &  shipped. Processing times vary, 2-30  days

Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new. 

What products can not be returned? - International Sales Clearance items, Custom Builds, Road Cases, DT12 items, items identified as non-returnable, discontinued items, used or NOS items,  electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, turntable cartridges, fog fluid

Crown XTI4002 2 Channel Stereo Power Amplifier 1200 Watts at 4Ω with DSP

There's no debate – when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat.

Features-

• Peakx Plus™ Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release

• Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning

• 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application

• New system monitoring provides software visibility of AC line voltage and power supply temperature

• Integrated cast-aluminum handles for easy handling and enhanced durability

• Locking power cord clip provides a secure connection between the amplifier and power cord

• Updated HiQnet System Architect™ control software

• Increased number of presets to a total of 50; 49 of which are user definable

Specifications-

Channels-      2

Sensitivity-   1.4V

Rated Power Output (per channel)-      1600W 2Ω, 1200W 4Ω, 650W 8Ω

Signal to Noise Ratio (below rated 1 kHz power at 8 ohms)-         100 dB (A-weighted)

THD-   < 0.5%

Frequency Response (at 1W, 20 Hz - 20 kHz)- + 0 dB, -1 dB

Crosstalk (below rated power) 20 Hz to 1 kHz-          >70 dB

Dimensions- 3.5" x 19" x 12.25"

Weight-         18.5 lbs (8.4 kg)

Shipping Weight-    21.5 lbs (9.8 kg)

IEC Power Connector-       15A

Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998.  We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.   

Shipping -Pro packed & shipped  USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed &  shipped. Processing times vary, 2-30  days

Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new. 

What products can not be returned? - International Sales Clearance items, Custom Builds, Road Cases, DT12 items, items identified as non-returnable, discontinued items, used or NOS items,  electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, turntable cartridges, fog fluid

Crown XLS1502 2 Channel DriveCore Stereo Power Amplifier 525 Watts at 4Ω

The Crown XLS 1502 Stereo Power Amplifier The next generation of XLS got a makeover with a sleek new look, a LCD display that is three times larger, and more DSP with higher capabilities. Like its predecessor, the new XLS is ultra-efficient with Crown’s patented DriveCore technology and can drive 2400W at 4Ω bridged with tons of headroom guaranteeing a clean, undistorted signal straight to your speakers. The XLS DriveCore 2 assures that you will be heard as you deliver a powerful, pure sound experience for any venue.

Features-

• Class D amp with Crown's ultra-efficient DriveCore technology weighs less than 11 lb

• Higher DSP capabilities- More control; has band pass filter per channel

• Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues

• Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full power

• Set sleep mode after specified time without having to press a button

• Security setting disables menu buttons; menu locked/unlocked by entering combination

• System reset allows factory settings to be restored

• Remote power trigger

• Peakx™ Limiters provide maximum output while protecting your speakers

• XLR, 1/4", RCA inputs provide flexibility

• Integrated PureBand™ Crossover System for better performance and control

• Efficient forced-air fans prevent excessive thermal buildup

Specifications-

Sensitivity-   1.4Vrms

Frequency Response-        +0dB, -1dB

Signal to Noise-       >103dB (at .775Vrms, 6dB lower)

Intermodulation Distortion-       < 0.3%

Damping Factor-     > 200

THD-   < 0.5%

Crosstalk-      At 1kHz- > 85dB, At 20kHz- > 55dB

Dimensions- 19" (48.3 cm) x 3.5" (8.9 cm) x 7.7" (19.6 cm)

Weight-         8.6 lbs (3.9 kgs)

Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998.  We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.   

Shipping -Pro packed & shipped  USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed &  shipped. Processing times vary, 2-30  days

Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new. 

What products can not be returned? - International Sales Clearance items, Custom Builds, Road Cases, DT12 items, items identified as non-returnable, discontinued items, used or NOS items,  electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, turntable cartridges, fog fluid