(585) 405-4375
contact@echotonemusic.net
Home / Speakers / Martin Audio
Martin Audio
Martin Audio XP12 12 Inch Compact Powered Two Way Portable Loudspeaker System
The XP12 is a compact, powered, two-way system designed by leading acoustic engineers. It can be used either as a stand- alone system, stage monitor or in conjunction with the XP118 powered subwoofer.
Featuring a 12” (300mm) LF drivers and a 1” (25mm) exit compression driver on an 80° x 50° rotatable horn, it is ideal for small to mid-size indoor venues requiring class-leading sound from a compact enclosure. The LF driver has a 2.5” (65mm) voice coil and powerful magnet system for the tightest bass response, while the HF compression driver utilizes a 1.75” (44mm) polyimide diaphragm for extended high-frequency response without distortion.
An onboard Class D amplifier module delivers 1000W LF + 300W HF peak output to the drivers and sophisticated DSP functions are controlled by a rotary interface and multi- function, easy-to-use colour screen on the rear panel. DSP features include crossover function, a three-channel mixer with three-band EQ on each input channel and selection of three voicing presets and operating modes for flexible usage without external processing. The LF and HF drivers are independently protected by RMS and peak limiters for longevity and consistency of performance.
The XP12 is road-ready. Constructed from durable plywood, it is fitted with a cloth-backed steel grille to protect the drivers from damage and dust ingress, while not impeding airflow at low frequencies. The enclosure has M8 inserts for eyebolt suspension and a pole-mount socket with a removable cap that maintains clean lines for install applications. It is finished in black textured hard-wearing paint as standard.
Features:
Compact self-powered, portable two-way system
1300W of Class D amplification
Global power supply with PFC (Power Factor Correction)
Onboard DSP with rotary control interface
Multi-function display for metering, control and function selection
Three-channel mixer
Three-band channel EQ, plus HPF (Ch1/2)
Independent LF and HF peak and RMS limiters
Three speaker mode and voicing presets
Bluetooth® control and streaming option
Durable plywood enclosure
User-rotatable 80° x 50° HF horn
Vertical and horizontal mounting options
Symmetrical multi-angle enclosure for PA or stage monitor use
Screw-free, cloth-backed steel grille
Integral ergonomic handles
Mounting options include pole-mount, wall bracket and flying inserts
Specifications:
ACOUSTICS
TYPE: Compact self-powered two-way system
FREQUENCY RESPONSE (5): 62Hz – 20kHz ±3dB, -10dB @ 50Hz
DRIVERS: LF: 12” (300mm)/2.5” (63.5mm) voice coil, ferrite motor system
HF: 1” (25mm) exit/1.7” (44mm) voice coil, polyimide dome compression driver
MAXIMUM SPL (9): 122dB continuous, 128dB peak
DISPERSION (-6DB): 80° H x 50° V (user-rotatable)
CROSSOVER: 2.3kHz active, 24dB/octave
MODULE AUDIO IN/OUT
INPUT CONNECTORS: 2 x female XLR/ 1⁄4” jack combo
MIC/LINE INPUT IMPEDANCE: 8 kΩ balanced
1⁄4” JACK TS INPUT IMPEDANCE: 1 MΩ unbalanced
MIX OUTPUT CONNECTOR: 1 x male XLR
MIX OUTPUT IMPEDANCE: 600Ω balanced
INTERNAL PROCESSING
INPUT CHANNEL EQ: 3-band on each channel plus HPF (Ch1/2)
SPEAKER EQ: 3 speaker mode/voicing presets
PROTECTION: LF and HF Peak and RMS limiting, amplifier thermal protection
AMPLIFIER MODULE
TYPE: 2 channel switch-mode, class D
PEAK OUTPUT POWER: 1300W total
1000W LF, 300W HF:
AVERAGE EFFICIENCY: 89%
COOLING: External convection cooled
MAXIMUM AMBIENT TEMPERATURE: 35°C (95°F) for full output
POWER SUPPLY
TYPE: Switch-mode, fixed frequency with PFC
AC INPUT OPERATING RANGE: 100-240V ~ AC, 50 - 60Hz
POWER FACTOR: > 0.98
NOMINAL POWER CONSUMPTION: 550W Max
MAINS CONNECTOR: 3-pin IEC
MECHANICAL
ENCLOSURE: Multi-angle birch/poplar ply
FINISH: Black textured paint
PROTECTIVE GRILLE: Black perforated steel with scrim cloth backing
FITTINGS: 17 x M8 inserts, pole-mount socket, 2 x pocket handle
DIMENSIONS: (W) 358mm x (H) 574mm x (D) 318mm
(W) 14.1in x (H) 22.6in x (D) 12.5in
WEIGHT: 18kg (40lbs)
Applications:
Portable Sound Reinforcement
Live Music Clubs
Nightclubs, Bars and Restaurants
Corporate AV
Hotels and Casinos
Mobile DJ’s
Weddings and Parties
How Installations
Rehearsal Studios
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Pro packed & shipped USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed & shipped. Processing times vary, 2-30 days
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids
Martin Audio X10 10 Inch Compact Passive Two Way Portable Loudspeaker System
The X10 is a high performance yet very compact two-way passive loudspeaker system which utilises a 10” (250mm)/2.5” (63mm) voice coil LF driver and a 1” (25mm) exit HF compression driver with a 1.4” (35mm) polyimide diaphragm. The rotatable 90° x 50° HF horn has equal horizontal and vertical mouth dimensions for directivity control in both planes.
It has a multitude of professional applications — from distributed sound reinforcement, HoW and AV events to frontfill/infill and use as an unobtrusive stage monitor. With a maximum SPL of 124dB @ 1m, it is uniquely placed to meet the foreground requirements of music bars and clubs that require upfront sound levels from a very compact enclosure. Use with a BlacklineX Series subwoofer will enable the X10 to operate as small dancefloor or sound reinforcement system that is remarkably powerful for its size, as well as being extremely portable.
The X10 is constructed from plywood and fitted with a screw-free steel grille, M8 inserts for wall brackets and eyebolt suspension, plus a pole-mount socket with a removable bung that maintains clean lines in install applications. Finished in black textured paint.
A full-range passive two-way system, the X10 may be used without a controller. However, the EQ and limiter functions of a controller such as the Martin Audio DX0.5 will maximize its capabilities. When used in conjunction with an X115, X118 or X210 subwoofer, crossover and EQ functions can be performed by the DX0.5.
Features:
Compact passive two-way system
Symmetrical multi-angle plywood enclosure
User-rotatable 90° x 50° horn
Vertical and horizontal orientation
Screw-free, cloth-backed perforated steel grille
Integral ergonomic handle
Pole-mount bung maintains clean lines
8Ω nominal impedance
Twin NL4 connectors
Flexible mounting options via M8 inserts
Specification:
TYPE: Compact, passive two-way system
FREQUENCY RESPONSE (5): 65Hz-20kHz ± 3dB, -10dB @ 55Hz
DRIVER: LF: 10” (250mm)/2.5” (63.5mm) voice coil, ferrite motor system
HF: 1” (25mm) exit/1.4” (35mm) voice coil, polyimide dome compression driver
RATED POWER (2): 250W AES, 1000W peak
SENSITIVITY (8): 94dB
MAXIMUM SPL (9): 118dB continuous, 124dB peak
NOMINAL IMPEDANCE: 8Ω
DISPERSION (-6DB): 90° H x 50° V (user-rotatable)
CROSSOVER: 2.4kHz passive
ENCLOSURE: Multi-angle birch/poplar ply
FINISH: Black textured paint
PROTECTIVE GRILLE: Black perforated steel with scrim cloth backing
CONNECTORS: 2 x NL4 type
PIN CONNECTIONS (INPUT): 1+/1-
PIN CONNECTIONS (LINK): 1+/- to 1+/-
FITTINGS: 19 x M8 inserts, pole-mount socket, 1 x bar handle
DIMENSIONS: (W) 324mm x (H) 522mm x (D) 289mm
(W) 12.8ins x (H) 20.6ins x (D) 11.4ins
WEIGHT: 14kg (30.9lbs)
ACCESSORIES: Wall bracket, eyebolts
Applications:
Portable sound reinforcement
Live music clubs
Bars and restaurants
Nightclubs
Unobtrusive stage monitoring
Corporate AV events and conferences
Weddings and parties
Main PA infill
Secondary stages at festivals
How, leisure centers and retail outlets
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Pro packed & shipped USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed & shipped. Processing times vary, 2-30 days
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids
Martin Audio X12 12 inch Compact Passive Two Way Portable Loudspeaker System
The Blackline X12 fulfils the requirement for a compact system that can deliver high sound levels — either as a stand-alone system or sup-plemented by a BlacklineX subwoofer. Featuring a 12” (300mm) LF driver unit and a 1” (25mm) exit compression driver on a user-rotatable horn, its 80° x 50° dispersion pattern is ideal for medium throw applications.
The Blackline X12 LF driver has a 2.5” (63mm) voice coil and a high BL motor, while the HF compression driver utilizes a 1.75” (44mm) poly-imide diaphragm for extended high frequency response. Use with a BlacklineX Series subwoofer will enable the X12 to operate as a dancefloor or sound reinforcement system that is remarkably powerful for its size, as well as being extremely portable.
The X12 is constructed from plywood and fitted with a screw-free steel grille, M8 inserts for wall brackets and eyebolt suspension, plus a pole-mount socket with a removable bung that maintains clean lines in install applications. Finished in black textured paint.
A full-range passive two-way system, the X12 may be used without a controller. However, the EQ and limiter functions of a controller such as the Martin Audio DX0.5 will maximize its capabilities. When used in conjunction with an X115, X118 or X210 subwoofer, crossover and EQ functions can be performed by the DX0.5.
Features:
Compact passive two-way system
Symmetrical multi-angle plywood enclosure
User-rotatable 80° x 50° horn
Vertical and horizontal orientation
Screw-free, cloth-backed perforated steel grille
Integral ergonomic handle
Pole-mount bung maintains clean lines
8Ω nominal impedance
Twin NL4 connectors
Flexible mounting options via M8 inserts
Specification:
TYPE: Compact, passive two-way system
FREQUENCY RESPONSE (5): 62Hz-20kHz ± 3dB, -10dB @ 50Hz
DRIVER: LF: 12” (300mm)/2.5” (63.5mm) voice coil, ferrite motor system
HF: 1” (25mm) exit/1.7” (44mm) voice coil, polyimide dome compression driver
RATED POWER (2): 300W AES, 1200W peak
SENSITIVITY (8): 97dB
MAXIMUM SPL (9): 122dB continuous, 128dB peak
NOMINAL IMPEDANCE: 8Ω
DISPERSION (-6DB): 80° H x 50° V (user-rotatable)
CROSSOVER: 2.3kHz passive
ENCLOSURE: Multi-angle birch/poplar ply
FINISH: Black textured paint
PROTECTIVE GRILLE: Black perforated steel with scrim cloth backing
CONNECTORS: 2 x NL4 type
PIN CONNECTIONS (INPUT): 1+/1-
PIN CONNECTIONS (LINK): 1+/- to 1+/-
FITTINGS: 20 x M8 inserts, pole-mount socket, 1 x bar handle
DIMENSIONS: (W) 358mm x (H) 574mm x (D) 337mm
(W) 14.1ins x (H) 22.6ins x (D) 13.7ins
WEIGHT: 17kg (37.5lbs)
ACCESSORIES: Wall bracket, eyebolts
Applications:
Portable sound reinforcement
Live music clubs
Bars and restaurants
Nightclubs
Unobtrusive stage monitoring
Corporate AV events and conferences
Weddings and parties
Main PA infill
Secondary stages at festivals
HoW, leisure centres and retail outlets
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Pro packed & shipped USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed & shipped. Processing times vary, 2-30 days
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids
Martin Audio CDD8B 8 Inch Ultra Compact two Way Passive Loudspeaker System
The CDD8 is an ultra-compact two-way passive loudspeaker system with an integrated 8” (200mm) LF/1” (25mm) exit HF Coaxial Differential Dispersion driver which can be easily rotated for horizontal or vertical orientation depending on venue design requirements. Its small size gives no indication of its high output capability. As a stand-alone loudspeaker, it has a multitude of applications and can also be incorporated as an infill loudspeaker in distributed systems using larger CDD models, such as the CDD12 and CDD15.
The Coaxial Differential Dispersion technology employed in the CDD8 delivers more consistent audience coverage than systems with fixed X° x Y° coverage patterns — projecting relatively more output to the rear of the audience, while having wide horizontal coverage close-up. Its innovative CDD driver achieves ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response associated with non-coaxial designs. Improving on conventional coaxial designs, which can suffer from high-frequency beaming, the driver features a static waveguide that merges seamlessly with the unique cone shape — maintaining the dispersion pattern out to very high frequencies.
The visually-distinctive enclosure can be used in either horizontal (landscape) or vertical (portrait) orientation, with rotation of the driver easily accomplished by removing the screw-free, protective grille. The curved shape of the enclosure allows it to be surface-mounted close to a wall or ceiling by means of optional wall and ceiling brackets.
Finished in black (RAL9005) or white (RAL9016) as standard, the CDD8 can be supplied in any RAL colour to order.
A full-range, passive two-way system, the CDD8 should be used with a compatible controller with appropriate limiter settings to provide system protection.
When used with the DX4.0 controller or an iKON amplifier, there are now enhanced DSP and FIR based pre-sets to deliver the absolute maximum performance and fidelity while limiter settings protect the integrity of the system.
Features:
Ultra-Compact, CDD™ passive two-way system
Coaxial Differential Dispersion™ technology
Elegant UPM Formi composite enclosure
User-rotatable coaxial drive unit
Vertical and horizontal mounting options
Screw-free perforated steel grille
8Ω nominal impedance
Discreet mounting accessories
Black or white standard color options
Specification
TYPE: Ultra-Compact, Coaxial Differential Dispersion passive two-way system
FREQUENCY RESPONSE (5): 70Hz-20kHz ± 3dB, -10dB @ 55Hz
DRIVER: LF: 8” (200mm)/2” (50mm) voice coil, long excursion, shared ferrite motor system with HF
HF: 1” (25mm) exit/1.4” (38mm) voice coil, polyimide dome compression driver
RATED POWER (2): 200W AES, 800W peak
SENSITIVITY (8): 94dB
MAXIMUM SPL (9): 117dB continuous, 123dB peak
NOMINAL IMPEDANCE: 8Ω
DISPERSION (-6DB): 110˚-80˚ horizontal, 60˚ vertical (user-rotatable)
CROSSOVER: 2.3kHz passive
ENCLOSURE: 14 litre, composite material
FINISH: Black textured paint
PROTECTIVE GRILLE: Black or white perforated steel with scrim cloth backing
CONNECTORS: Low profile 13A push-lock
PIN CONNECTIONS: Left to right: Input+, Input -, Link -, Link +
FITTINGS: 6 x M6 inserts for wall/ceiling brackets
DIMENSIONS: (W) 256mm x (H) 410mm x (D) 252mm
(W) 10.1ins x (H) 16.1ins x (D) 9.9ins
WEIGHT: 9.5kg (21lbs)
Applications:
Live Music Clubs and Bars
Nightclubs
Bars and Restaurants
Museums and AV Spaces
Convention Centers
Hotels
Retail Outlets
Leisure Centers
Houses of Worship
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Pro packed & shipped USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed & shipped. Processing times vary, 2-30 days
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids
Martin Audio CDD6B 6.5" Passive Ultra Compact Two Way Passive Loudspeaker System
The ultra-compact CDD6 is a two-way passive loudspeaker system designed to fulfil the requirement for full-frequency dynamic performance from a very small enclosure. Featuring a 6.5” (165mm) LF/1” (25mm) HF Coaxial Differential Dispersion driver, its extremely small size and sleek lines make it ideal for visibly-unobtrusive applications. It can also be used as a fill system in conjunction with larger CDD Series models and, with the addition of an SX subwoofer, can reproduce surprisingly high levels of music program.
The Coaxial Differential Dispersion technology employed in the CDD6 delivers more consistent audience coverage than systems with fixed X° x Y° coverage patterns — projecting relatively more output to the rear of the audience, while having wide horizontal coverage close-up. Its innovative CDD driver achieves ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response associated with non-coaxial designs. Improving on conventional coaxial designs, which can suffer from high-frequency beaming, the driver features a static waveguide that merges seamlessly with the unique cone shape — maintaining the dispersion pattern out to very high frequencies.
The visually-distinctive enclosure can be used in either horizontal (landscape) or vertical (portrait) orientation, with rotation of the driver easily accomplished by removing the screw-free, protective grille. The curved shape of the enclosure allows it to be surface-mounted close to a wall or ceiling by means of optional wall and ceiling brackets.
Finished in black (RAL9005) or white (RAL9016) as standard, the CDD6 can be supplied in any RAL colour to order.
A full-range, passive two-way system, the CDD6 should be used with a compatible controller with appropriate limiter settings to provide system protection.
When used with the DX4.0 controller or an iKON amplifier, there are now enhanced DSP and FIR based pre-sets to deliver the absolute maximum performance and fidelity while limiter settings protect the integrity of the system.
Features:
Ultra-Compact, CDD™ passive two-way system
Coaxial Differential Dispersion™ technology
Elegant UPM Formi composite enclosure
User-rotatable coaxial drive unit
Vertical and horizontal mounting options
Screw-free perforated steel grille
8Ω nominal impedance
Discreet mounting accessories
Black or white standard color options
Specification
TYPE: Ultra-Compact, Coaxial Differential Dispersion passive two-way system
FREQUENCY RESPONSE (5): 80Hz-20kHz ± 3dB, -10dB @ 70Hz
DRIVER: LF: 6.5” (165mm)/1.5” (38mm) voice coil, long excursion, ferrite motor system
HF: 1” (25mm) voice coil, fabric dome with neodymium motor system
RATED POWER (2): 150W AES, 600W peak
SENSITIVITY (8): 91dB
MAXIMUM SPL (9): 113dB continuous, 119dB peak
NOMINAL IMPEDANCE: 8Ω
DISPERSION (-6DB): 110˚-80˚ horizontal, 80˚ vertical (user-rotatable)
CROSSOVER: 2.5kHz passive
ENCLOSURE: 9 litre, composite material
FINISH: Black textured paint
PROTECTIVE GRILLE: Black or white perforated steel with scrim cloth backing
CONNECTORS: Low profile 13A push-lock
PIN CONNECTIONS: Left to right: Input+, Input -, Link -, Link +
FITTINGS: 4 x M6 inserts for wall/ceiling brackets
DIMENSIONS: (W) 210mm x (H) 325mm x (D) 210mm
(W) 8.3ins x (H) 12.8ins x (D) 8.3ins
WEIGHT: 5.69kg (12.54lbs)
Applications:
Bars and Restaurants
Museums and AV Spaces
Convention Centers
Hotels
Retail Outlets
Leisure Centers
Houses of Worship
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Pro packed & shipped USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed & shipped. Processing times vary, 2-30 days
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids
Martin Audio ACP-55T-B 5.25" Compact Passive Two Way Pendant Ceiling Speaker
As part of the ADORN commercial loudspeaker series, the ACP-55T is a compact, two-way pendant loudspeaker designed for background and foreground applications hat require premium performance and cost competitiveness in spaces with open ceiling architecture.
The ACP-55T brings full-frequency response, consistent coverage and intelligibility to a wide range of architectural environments — from hotel atriums and exhibition spaces to retail outlets, bars and restaurants.
Comprising a 5.25” (135mm) LF driver and a 0.75” (19mm) silk-dome tweeter, the ACP-55T produces 109dB peak output at 1 metre and delivers superb sound quality for both music and speech reproduction. Its stylish pendant enclosure is equipped with a single-point mounting system plus provision for attaching a safety cable.
The consistent and wide 150° conical coverage of the ACP-55T reduces the number of speakers required for even coverage — leading to a reduction in installation cost.
It incorporates a high-quality transformer for 70V/100V line operation, with transformer taps selected by a rotary switch at the top of the pendant enclosure. The switch also provides for 16-ohm low impedance operation — enabling four or more speakers to be driven in parallel from a single amplifier channel. For full-bandwidth protection, the low and high- frequency sections are individually protected against overload by auto-resetting thermal fuses.
The grille is bezel-less for a clean look, its bayonet fitting is easy to remove without the use of tools and finished in white or black to match ADORN on-wall loudspeakers and may also be painted to blend with any décor.
Features:
High performance two-way pendant speaker
5.25” (135mm) LF driver and 0.75” (19mm) HF dome tweeter
Wide 150° conical coverage pattern reduces speaker count required for even coverage
70V/100V multi-tap line transformer or 16-ohm low-impedance operation
Low and high-frequency overload protection
Quick release, bezel-less grille
UL94V-0 rated baffle and enclosure
5-year warranty
Specification:
TYPE: Passive two-way pendant speaker, ported bass reflex
FREQUENCY RESPONSE (1): 98Hz-20kHz ± 3dB
-10dB @ 56Hz
DRIVERS :
LF: 5.25” /1” high-temp voice coil, coated paper cone, rubber surround, ferrite motor, pressed steel chassis
HF: 0.75” silk dome, neodymium motor
RATED POWER (2): 50W AES, 200W peak
RECOMMENDED AMPLIFIER: VIA2004 (for low-impedance operation)
SENSITIVITY(4): 86dB / 1W(4V) / 1m (full space)
MAXIMUM SPL (9): 109dB peak
NOMINAL IMPEDANCE: 16Ω
DISPERSION (-6DB): 150° conical up to 7kHz
CROSSOVER: 3kHz passive (LF and HF auto-resetting fuses
TRANSFORMER TAPS:
70V: 30w / 15w / 7.5w / 3.75w
100V: 30w / 15w / 7.5w
RECOMMENDED HIGH-PASS FILTER: 60Hz 24dB/oct
ENCLOSURE: UL 94V-0 rated ABS baffle and enclosure
FINISH: Black
GRILLE: Perforated steel, powder-coated, bayonet fitting
CONNECTORS: Ceramic connector (in and link)
DIMENSIONS: (OD) 246mm x (D) 238mm
(OD) 9.7in x (D) 9.35in
WEIGHT: 3.46kg (7.62lbs)
Applications:
Retail outlets
Cafes, bars and restaurants
Museums and Houses of Worship
Hotels, casinos and concourses
Exhibition spaces and convention centers
Transportation facilities
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Pro packed & shipped USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed & shipped. Processing times vary, 2-30 days
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids
Martin Audio WB10/12B Wall Bracket For Blackline X XP and CDD Loudspeaker
WALL BRACKET FOR BLACKLINE X10, X12 AND XP12, CDD10, CDD12 AND CDD-LIVE12
Features:
Vertical and horiztonal tilt and pan
Weatherised for outdoor installation
Available in black (WB10/12B)
Technical Specifications
WEIGHT 1.26kgs
MATERIAL Weatherized polyester powder coated steel
Contents
1 x WB10/12
4 x M8x20 counter-sunk socket head
Martin Audio X8 8" Ultra Compact Passive Two Way System Portable Loudspeaker
The Blackline X8 is an ultra-compact passive two-way system with an 8” (200mm)/2” (50mm) voice coil LF driver and a 1” (25mm) HF driver mounted on a 90° x 50° horn which can be easily rotated for horizontal or vertical orientation, depending on venue requirements. Its very small size gives no indication of its high output capability.
As a stand-alone loudspeaker, it has a multitude of professional applications — from distributed sound reinforcement, HoW and AV events to frontfill/infill and use as a micro stage monitor. Complemented by a BlacklineX subwoofer, it is the ideal, simple-to-use system for portable applications and installations which call for an unobtrusive system that can deliver pristine sound over short and medium throw distances.
The Blackline X8 is constructed from plywood and fitted with a screw-free steel grille, M8 inserts for wall brackets and eyebolt suspension, plus a pole-mount socket with a removable bung that maintains clean lines in install applications. Finished in black textured paint.
A full-range passive two-way system, the X8 may be used without a controller. However, the EQ and limiter functions of a controller such as the Martin Audio DX0.5 will maximize its capabilities. When used in conjunction with an X115, X118 or X210 subwoofer, crossover and EQ functions can be performed by the DX0.5.
Features:
Ultra-Compact passive two-way system
Symmetrical multi-angle plywood enclosure
User-rotatable 90° x 50° horn
Vertical and horizontal orientation
Screw-free, cloth-backed perforated steel grille
Integral ergonomic handle
Pole-mount bung maintains clean lines
8Ω nominal impedance
Twin NL4 connectors
Flexible mounting options via M8 inserts
Specification
TYPE: Ultra-Compact, passive two-way system
FREQUENCY RESPONSE (5): 70Hz-20kHz ± 3dB, -10dB @ 60Hz
DRIVER: LF: 8” (200mm)/2” (50mm) voice coil, ferrite motor system
HF: 1” (25mm) exit/1” (25mm) voice coil, polyimide dome compression driver
RATED POWER (2): 200W AES, 800W peak
SENSITIVITY (8): 92dB
MAXIMUM SPL (9): 115dB continuous, 121dB peak
NOMINAL IMPEDANCE: 8Ω
DISPERSION (-6DB): 90° H x 50° V (user-rotatable)
CROSSOVER: 2.9kHz passive
ENCLOSURE: Multi-angle birch/poplar ply
FINISH: Black textured paint
PROTECTIVE GRILLE: Black perforated steel with scrim cloth backing
CONNECTORS: 2 x NL4 type
PIN CONNECTIONS (INPUT): 1+/1-
PIN CONNECTIONS (LINK): 1+/- to 1+/-
FITTINGS: 13 x M8, 6 x M6 inserts, pole-mount socket, 1 x pocket handle
DIMENSIONS: (W) 257mm x (H) 422mm x (D) 243mm
(W) 10.1ins x (H) 16.6ins x (D) 9.6ins
WEIGHT: 8kg (17.6lbs)
ACCESSORIES: Wall bracket, eyebolts
Applications:
Portable sound reinforcement
Live music clubs
Bars and restaurants
Nightclubs
Unobtrusive stage monitoring
Corporate AV events and conferences
Weddings and parties
Main PA infill
Secondary stages at festivals
HoW, leisure centers and retail outlets
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Pro packed & shipped USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed & shipped. Processing times vary, 2-30 days
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids
Martin Audio CDDY12W Yoke Assembly for CDD12 Loudspeaker Installation White
Yoke assembly white for CDD12 Loudspeaker installations, Vertical and horizontal tilt and weatherized for outdoor installation.
Features:
Vertical and horizontal tilt and pan
Weatherized for outdoor installation
Available in White (CDDY12W-WR)
Specifications:
WEIGHT 5.46kgs (12lbs)
MATERIAL Weatherized polyester powder coated steel
Applications:
Installation of CDD12 loudspeakers
Contents:
1 x CDD12 yoke
2 x CDD12 yoke arms
4 x M8 threaded spacers
2 x M12 nyloc nut
2 x M12 plastic washer
2 x M12 flat washer
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Pro packed & shipped USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed & shipped. Processing times vary, 2-30 days
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids
Martin Audio SX118 18" Inches Passive Direct Radiating Subwoofer Loudspeaker
The SX118 is a compact, high performance subwoofer that extends the low frequency operating range of the system to 47Hz and provides exceptional low frequency output for such a compact enclosure.
SX118 features a long-excursion 18” (460mm)/4” (100 mm) voice coil driver with a water-resistant cone and triple roll surround in a compact reflex enclosure.
The design of the 18” driver maximizes output while minimizing power compression and distortion, and the four reflex ports have a large frontal area to reduce turbulent air noise at very high levels. The enclosure is constructed from multi-laminate birch ply, finished with a durable polyurea coating and equipped with a Zintec grille, twin grab handles, skids, flying inserts for installation and a threaded pole socket for pole-mounting point source loudspeakers or up to 4 WPM enclosures as a simple plug-and-play system.
The product is supplied as standard without cabinet wheels, but they are available as an accessory.
By adding the input board cover accessory, SX118 is fully weather resistant and suitable for permanent outdoor usage.
Features:
Compact, direct radiating subwoofer
18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet, waterproof cone
High output capability
Tour-grade plywood enclosure with flying inserts
Specification:
TYPE: Compact, direct radiating subwoofer
FREQUENCY RESPONSE (1): 47Hz – 150Hz ±3dB,
-10dB @ 41Hz
DRIVER: 18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet, waterproof cone
RATED POWER (2): 1000W AES, 4000W peak
SENSITIVITY (10): 102dB
MAXIMUM SPL (9): 138dB peak
NOMINAL IMPEDANCE: 8Ω
DISPERSION (-6DB): Omnidirectional/or Cardioid (paired)
ENCLOSURE: Multi-laminate birch/poplar ply
FINISH: Durable Polyurea Coating
PROTECTIVE GRILLE: Black perforated Zintec
CONNECTORS: 2 x NL4 type
PIN CONNECTIONS (INPUT): LF: +1, -1 Link through: +2, -2
PINS CONNECTIONS (LINK): LF: +1, -1 Link through: +2, -2
FITTINGS: Two skids on base, with mating channels on top
M20 top-mounted thread plate for pole mounting
16 x M10 mounting points
2 x bar handles, 1 on each side
4 x fittings for optional transit cover
16 x M8 inserts for optional castors
DIMENSIONS (INCL SKIDS): (W) 600mm x (H) 509mm x (D) 632mm
(760mm including castors)
(W) 24in x (H) 20.36in x (D) 25.26in
(30.38in including castors)
WEIGHT: 43.5kg (96lbs) w/o castors 47kg (104lbs) with castors
Applications:
Touring sound reinforcement for small and medium-size venues
Fixed installations in concert halls, theatres, ballrooms and HoW
Sports stadium, arena installations & corporate AV events
Outdoor restaurant, bar and hotel entertainment areas
Concourses and Theme Parks
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Pro packed & shipped USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed & shipped. Processing times vary, 2-30 days
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids
Martin Audio XP15 15" Self Powered Two Way Portable Loudspeaker System Bluetooth
The XP15 is a self-powered two-way system designed by leading acoustic engineers for indoor portable applications and installations that require powerful performance from a single portable loudspeaker.
Featuring a 15” (380mm)/3” (75mm) voice coil LF drive unit, and a 1” (25mm) exit HF compression driver with a 1.75” (44mm) polyimide diaphragm. With an accurately-defined 80° x 50° coverage pattern, it combines very high output capability with exceptional sonic performance and low frequency impact.
Its Class D amplifier module delivers 1000W LF + 300W HF peak output to the drivers, which are independently protected by RMS and peak limiters. Onboard DSP functions are controlled by a rotary encoder interface and multi-function, easy-to-use colour display on the rear panel. DSP features include crossover function, a three-channel mixer with three- band EQ on each input channel and a choice of three voicing presets and operating modes for flexible operation without external processing.
The symmetrical, multi-angle enclosure is manufactured from birch and poplar plywood and finished in textured black paint. It is fitted with M8 inserts for eyebolt suspension plus a pole-mount socket with a removable cap. Its cloth-backed protective steel grille is a spring-fit into the sides of the enclosure for easy access to rotate the HF horn.
Features:
High output, self-powered, portable two-way system
1300W of Class D amplification
Global power supply with PFC (Power Factor Correction)
Onboard DSP with rotary control interface
Multi-function display for metering, control and function selection, Three-channel mixer
Three-band channel EQ, plus HPF (Ch1/2)
Independent LF and HF peak and RMS limiters
Three speaker mode and voicing presets
Bluetooth® control and streaming option
Durable plywood enclosure
User-rotatable 80° x 50° HF horn
Vertical and horizontal mounting options
Symmetrical multi-angle enclosure for PA or stage monitor use
Screw-free, cloth-backed steel grille
Integral ergonomic handles
Mounting options include pole-mount and flying inserts
Specification:
ACOUSTICS
TYPE: High output, self-powered two-way system
FREQUENCY RESPONSE (5): 55Hz – 20kHz ±3dB -10dB @ 45Hz
DRIVERS: LF: 15” (380mm)/3” (75mm) voice coil ferrite motor system
HF: 1” (25mm) exit/1.7” (44mm) voice coil, polyimide dome compression driver
MAXIMUM SPL (9): 125dB continuous / 131dB peak
DISPERSION: 80° H x 50° V (user-rotatable)
CROSSOVER: 2kHz active, 24dB/octave
MODULE AUDIO IN/OUT
INPUT CONNECTORS: 2 x female XLR/ 1⁄4” jack combo
MIC/LINE INPUT IMPEDANCE: 8 kΩ balanced
1⁄4” JACK TS INPUT IMPEDANCE: 1 MΩ unbalanced
MIX OUTPUT CONNECTOR: 1 x male XLR
MIX OUTPUT IMPEDANCE: 600Ω balanced
INTERNAL PROCESSING
INPUT CHANNEL EQ: 3-band on each channel plus HPF (Ch1/2)
SPEAKER EQ: 3 speaker mode/voicing presets
PROTECTION: LF and HF Peak and RMS limiting, amplifier thermal protection
AMPLIFIER MODULE
TYPE: 2 channel switch-mode, class D
PEAK OUTPUT POWER: 1300W total
1000W LF, 300W HF
AVERAGE EFFICIENCY: 89%
COOLING: External convection cooled
MAXIMUM AMBIENT TEMPERATURE: 35°C (95°F) for full output
POWER SUPPLY
TYPE: Switch-mode, fixed frequency with PFC
AC INPUT OPERATING RANGE: 100-240V ~ AC, 50 - 60Hz
POWER FACTOR: > 0.98
NOMINAL POWER CONSUMPTION: 550W Max
MAINS CONNECTOR: 3-pin IEC
MECHANICAL
ENCLOSURE: Multi-angle birch/poplar ply
FINISH: Black textured paint
PROTECTIVE GRILLE: Black perforated steel with scrim cloth backing
FITTINGS: 13 x M8 inserts, pole-mount socket, 2 x pocket handles
DIMENSIONS: (W) 427mm x (H) 690mm x (D) 407mm
(W) 16.8in x (H) 27.2 x (D) 16.0in
WEIGHT: 26kg (57lbs)
Applications:
Portable Sound Reinforcement
Live Music Clubs
Nightclubs, Bars and Restaurants
Corporate AV
Hotels and Casinos
Mobile DJ’s
Weddings and Parties
HoW Installations
Rehearsal Studios
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Pro packed & shipped USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed & shipped. Processing times vary, 2-30 days
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids
Martin Audio CDD8W 8" Ultra Compact Two Way Passive Portable Loudspeaker System
The CDD8 is an ultra-compact two-way passive loudspeaker system with an integrated 8” (200mm) LF/1” (25mm) exit HF Coaxial Differential Dispersion driver which can be easily rotated for horizontal or vertical orientation depending on venue design requirements. Its small size gives no indication of its high output capability. As a stand-alone loudspeaker, it has a multitude of applications and can also be incorporated as an infill loudspeaker in distributed systems using larger CDD models, such as the CDD12 and CDD15.
The Coaxial Differential Dispersion technology employed in the CDD8 delivers more consistent audience coverage than systems with fixed X° x Y° coverage patterns — projecting relatively more output to the rear of the audience, while having wide horizontal coverage close-up. Its innovative CDD driver achieves ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response associated with non-coaxial designs. Improving on conventional coaxial designs, which can suffer from high-frequency beaming, the driver features a static waveguide that merges seamlessly with the unique cone shape — maintaining the dispersion pattern out to very high frequencies.
The visually-distinctive enclosure can be used in either horizontal (landscape) or vertical (portrait) orientation, with rotation of the driver easily accomplished by removing the screw-free, protective grille. The curved shape of the enclosure allows it to be surface-mounted close to a wall or ceiling by means of optional wall and ceiling brackets.
Finished in black (RAL9005) or white (RAL9016) as standard, the CDD8 can be supplied in any RAL colour to order.
A full-range, passive two-way system, the CDD8 should be used with a compatible controller with appropriate limiter settings to provide system protection.
When used with the DX4.0 controller or an iKON amplifier, there are now enhanced DSP and FIR based pre-sets to deliver the absolute maximum performance and fidelity while limiter settings protect the integrity of the system.
Features:
Ultra-Compact, CDD™ passive two-way system
Coaxial Differential Dispersion™ technology
Elegant UPM Formi composite enclosure
User-rotatable coaxial drive unit
Vertical and horizontal mounting options
Screw-free perforated steel grille
8Ω nominal impedance
Discreet mounting accessories
White standard color options
Specification
TYPE: Ultra-Compact, Coaxial Differential Dispersion passive two-way system
FREQUENCY RESPONSE (5): 70Hz-20kHz ± 3dB, -10dB @ 55Hz
DRIVER: LF: 8” (200mm)/2” (50mm) voice coil, long excursion, shared ferrite motor system with HF
HF: 1” (25mm) exit/1.4” (38mm) voice coil, polyimide dome compression driver
RATED POWER (2): 200W AES, 800W peak
SENSITIVITY (8): 94dB
MAXIMUM SPL (9): 117dB continuous, 123dB peak
NOMINAL IMPEDANCE: 8Ω
DISPERSION (-6DB): 110˚-80˚ horizontal, 60˚ vertical (user-rotatable)
CROSSOVER: 2.3kHz passive
ENCLOSURE: 14 litre, composite material
FINISH: White textured paint
PROTECTIVE GRILLE: Black or white perforated steel with scrim cloth backing
CONNECTORS: Low profile 13A push-lock
PIN CONNECTIONS: Left to right: Input+, Input -, Link -, Link +
FITTINGS: 6 x M6 inserts for wall/ceiling brackets
DIMENSIONS: (W) 256mm x (H) 410mm x (D) 252mm
(W) 10.1ins x (H) 16.1ins x (D) 9.9ins
WEIGHT: 9.5kg (21lbs)
Applications:
Live Music Clubs and Bars
Nightclubs
Bars and Restaurants
Museums and AV Spaces
Convention Centers
Hotels
Retail Outlets
Leisure Centers
Houses of Worship
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Pro packed & shipped USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed & shipped. Processing times vary, 2-30 days
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids
Martin Audio CDDY10B Yoke Assembly For CDD10 Loudspeaker Installations
Yoke assembly for CDD10 Loudspeaker installation, Vertical and horizontal tilt and pan and weatherized for outdoor installation.
Features
Vertical and horizontal tilt and pan
Weatherized for outdoor installation
Available in black (CDDY10B-WR)
Technical Specifications
WEIGHT 4.05kgs (8.9lbs)
MATERIAL Weatherized polyester powder coated steel
Applications
Installation of CDD10 loudspeakers
Contents
1 x CDD10 yoke
2 x CDD10 yoke arms
4 x M8 threaded spacers
2 x M12 nyloc nut
2 x M12 plastic washer
2 x M12 flat washer
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Pro packed & shipped USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed & shipped. Processing times vary, 2-30 days
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids
Martin Audio CDDCB6/8B Ceiling Bracket for CDD6 & CDD8 Loudspeaker Installations
The CDDCB6/8B Ceiling Bracket in Black is suitable for suspending your CDD6 and CDD8 speakers from the ceiling.
FEATURES:
Suitable for the Martin Audio CDD6 and CDD8 speakers
A sturdy metal bracket
Both versions have a polyester powdered coating
This version is finished in Jet Black
Sold and priced per bracket
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Pro packed & shipped USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed & shipped. Processing times vary, 2-30 days
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids
Martin Audio SX110 10 Inch Ultra compact Passive Slimline Subwoofer Loudspeaker
The SX110 is an slimline subwoofer designed for applications that call for increased impact and low frequency performance in a visually unobtrusive enclosure. Its very small size makes it perfectly suited to installed sound applications where space is limited such as under banquette seating.
The SX110 features a 10” (250mm)/2” (50mm) voice coil driver and generously sized low frequency port for reduced air noise. An ideal subwoofer to augment the bass output of ADORN Series or small CDD loudspeakers, it can be used on the ground or flown using integral M8 inserts.
The SX110 enclosure is constructed from plywood and finished in black or white textured paint as standard. An impact-resistant perforated steel grille protects the drivers, and rubber feet on the base resist movement.
When used with Martin Audio full-range systems, crossover and EQ functions can be performed by the DX0.5 or DX4.0 system controller
Features:
Slimline direct-radiator subwoofer
1 x 10” (250mm) driver with 2” (50mm) voice coil
Large port for reduced air noise
Perforated steel grille
8Ω nominal impedance
M8 flying inserts
Specification
TYPE: Slimline, direct radiating subwoofer
FREQUENCY RESPONSE (1): 50Hz-150Hz ± 3dB,
-10dB @ 42Hz
DRIVER: 1 x 10” (250mm)/2” (50mm) voice coil, long excursion, ferrite magnet
RATED POWER (2): 250W AES, 1000W peak
RECOMMENDED AMPLIFIER: VIA 2502
SENSITIVITY (10): 97dB
MAXIMUM SPL (9): 121dB continuous, 127dB peak (half space)
NOMINAL IMPEDANCE: 8Ω
DISPERSION (-6DB): Omnidirectional
CROSSOVER: 80-120Hz active
ENCLOSURE: Plywood
FINISH: White
PROTECTIVE GRILLE: Perforated steel
CONNECTORS: 2 x NL4 type
PIN CONNECTIONS (INPUT): +1, -1 Link through: +2, -2
PINS CONNECTIONS (LINK): +1, -1 Link through: +2, -2
FITTINGS: 12 x M8 inserts
DIMENSIONS (INCL FEET): (W) 417mm x (H) 297mm x (D) 415mm
(W) 16.4ins x (H) 11.7ins x (D) 16.3ins
WEIGHT: 12kg (26.5lbs)
Applications:
Retail outlets
Cafes, bars and restaurants
Museums and Houses of Worship
Fitness clubs
Educational facilities
Hotels and convention centers
** it can be used on the ground or flown using integral M8 inserts
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Pro packed & shipped USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed & shipped. Processing times vary, 2-30 days
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids
Martin Audio X218B Dual Driver 2 x 18" Passive Subwoofer Loudspeaker System
The Blackline X218 is a dual-driver, high performance subwoofer for use with BlacklineX Series full-range loudspeakers. With an operating range of 42Hz-200Hz + 3dB, it produces high output levels with low distortion and can be used singly or stacked horizontally. It features dual 18” (460mm)/4” (100mm) voice coil, long-excursion drivers in a reflex enclosure with eight large ports that reduce air turbulence at high output levels.
The X218 enclosure is constructed from plywood and finished in black textured paint.
For added versatility in deployment, the X218 is fitted with a 35mm pole-mount socket for mounting BlacklineX full-range enclosures, and integral M10 inserts provide for eyebolt suspension of a single enclosure. Ergonomic handles assist ease of handling and the drivers are protected by a perforated steel grille. Rubber feet on the base of the X218 resist movement and align with recesses in the top surface for stable horizontal stacking. Feet are also provided on one side of the enclosure for vertical operation of a single cabinet.
The X218 is supplied as standard without castors, which are available as an accessory pack.
When used with BlacklineX Series full-range systems, crossover and EQ functions can be performed by the DX0.5 or DX4.0 system controllers or by a Martin Audio amplifier with onboard DSP.
Features:
Dual-driver, direct radiator subwoofer
2 x 18” (460mm) drivers with 4” (100mm) voice coils
Durable plywood enclosure
Large ports for reduced air noise
Powder coated, perforated steel grille
Integral ergonomic handles
35mm pole-mount socket
Feet for vertical or horizonal operation
Rebate recesses for stable horizontal stacking
M10 flying inserts
Specification
TYPE: Dual-driver, direct radiating subwoofer
FREQUENCY RESPONSE (5): 42Hz-200Hz ± 3dB, -10dB @ 33Hz
DRIVER: 18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet
RATED POWER (2): 1600W AES, 6400W peak
SENSITIVITY (8): 106dB
MAXIMUM SPL (9): 141dB peak (half space)
NOMINAL IMPEDANCE: 4Ω
DISPERSION (-6DB): Omnidirectional
CROSSOVER: 80-120Hz active
ENCLOSURE: Birch/poplar ply
FINISH: Black textured paint
PROTECTIVE GRILLE: Black perforated steel
CONNECTORS: 2 x NL4 type
PIN CONNECTIONS (INPUT): 1+ 1- Link Through 2+ 2-
PIN CONNECTIONS (LINK): 1+ 1- Link Through 2+ 2-
FITTINGS: 12 x M10 inserts, pole-mount socket
DIMENSIONS: (W) 1049mm x (H) 587mm x (D) 727mm
(W) 41.3ins x (H) 23.1ins x (D) 28.6ins
WEIGHT: 88kg (194lbs)
Applications:
Portable sound reinforcement
Live music clubs
Bars and restaurants
Nightclubs
Corporate AV events and conferences
Weddings and parties
Secondary stages at festivals
HoW, leisure centers and retail outlets
***This is a freight shipped item to a business or Venue with Loading dock. If you don't have one and need liftgate delivery you will be invoiced an an additional $89 for that service. Contact us prior to purchase if this is the case.
Martin Audio CDDY10W Yoke Assembly For CDD10 Loudspeaker Installations
Yoke assembly for CDD10 Loudspeaker installation, Vertical and horizontal tilt and pan and weatherized for outdoor installation.
Features
Vertical and horizontal tilt and pan
Weatherized for outdoor installation
Available in White (CDDY10W-WR)
Technical Specifications
WEIGHT 4.05kgs (8.9lbs)
MATERIAL Weatherized polyester powder coated steel
Applications
Installation of CDD10 loudspeakers
Contents
1 x CDD10 yoke
2 x CDD10 yoke arms
4 x M8 threaded spacers
2 x M12 nyloc nut
2 x M12 plastic washer
2 x M12 flat washer
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Pro packed & shipped USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed & shipped. Processing times vary, 2-30 days
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids
Martin Audio A55TW 5.25 Inch Ultra Compact Passive Two Way On Wall Loudspeaker
The ADORN A55 is a two-way passive speaker with an elegant design that is perfect for architectural environments that require high-fidelity sound from an unobtrusive, ultra-compact enclosure. It brings class-leading performance, reliability and value to a wide range of commercial sound applications — from retail outlets, bars and restaurants to corporate offices and convention centres.
The A55 is the perfect choice for background and foreground systems which require superior performance. Its Martin Audio signature sound characteristic also provides a seamless sonic transition within a multi-zoned complex using larger Martin Audio systems such as CDD or BlacklineX.
Comprising a 5.25” (135mm) LF driver and a 0.75” (19mm) silk-dome HF driver on a 110° x 80° horn, it handles 50W AES, 200W peak and can produce 113dB peak output at 1 metre. It has a smooth frequency response and strong bass reproduction that extends down to 65Hz.
With a nominal impedance of 16 ohms, multiple speakers can be driven in parallel from a single channel of a low impedance amplifier, such as the Martin Audio VIA2004, thereby maximising efficiency and minimising cost. For full-bandwidth protection, the low and high-frequency sections are individually protected against overload.
Available in black or white as standard, it can be readily painted to match any décor, and can be wall-mounted vertically or horizontally using the wall bracket supplied. In addition, for general outdoor use the cabinet only requires the additional waterproof connector cover.
The VIA2004 amplifier in combination with a Martin Audio DX0.5 controller will be perfect partners for small scale efficient installations, or with the DX4.0 controller for larger more complex installations, which could then also be managed by Martin Audio’s VU-NET control software platform.
The Martin Audio SX110 subwoofer will extend the bandwidth of ADORN on-wall speakers and is ideal for foreground music applications which require increased impact and low frequency performance.
Features:
Contemporary, unobtrusive design
High output capability
High fidelity sound
Low and high-frequency overload protection
Vertical or horizontal orientation
Wide 110° x 80° coverage
Wall bracket included
5-year warranty
Specification
TYPE: Ultra-Compact passive two-way system, front ported bass reflex
FREQUENCY RESPONSE (1): 90Hz-17kHz ± 3dB
-10dB @ 65
DRIVERS : LF: 5.25” /1” high-temp voice coil, coated paper, cone, rubber surround, ferrite motor, pressed steel chassis
HF: 0.75” silk dome, neodymium motor
RATED POWER (2): 50W AES, 200W peak
RECOMMENDED AMPLIFIER: VIA2004
SENSITIVITY(4): 90dB/1W/1m
MAXIMUM SPL (9): 113dB peak
NOMINAL IMPEDANCE: 16Ω
DISPERSION (-6DB): 110° H x 80° V
CROSSOVER: 3.5kHz passive (LF and HF auto-resetting fuses)
RECOMMENDED HIGH-PASS FILTER: 60Hz 24dB/oct
ENCLOSURE: ABS, UL 94V-0 rated
FINISH: White
GRILLE: Perforated steel
CONNECTORS: Push terminals
FITTINGS: Wall bracket included
DIMENSIONS EXCL. BRACKET:
(W) 152mm x (H) 245mm x (D) 140mm
(W) 6in x (H) 9.6in x (D) 5.5in
WEIGHT: 2.21kg (4.9lbs)
Applications:
Retail outlets
Cafes, bars and restaurant chains
Hotels and convention centers
Educational facilities
Corporate offices
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Pro packed & shipped USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed & shipped. Processing times vary, 2-30 days
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids
Martin Audio A55W 5 Inch Compact Passive Two Way On Wall Loudspeaker System
The ADORN A55 is a two-way passive speaker with an elegant design that is perfect for architectural environments that require high-fidelity sound from an unobtrusive, ultra-compact enclosure. It brings class-leading performance, reliability and value to a wide range of commercial sound applications — from retail outlets, bars and restaurants to corporate offices and convention centres.
The A55 is the perfect choice for background and foreground systems which require superior performance. Its Martin Audio signature sound characteristic also provides a seamless sonic transition within a multi-zoned complex using larger Martin Audio systems such as CDD or BlacklineX.
Comprising a 5.25” (135mm) LF driver and a 0.75” (19mm) silk-dome HF driver on a 110° x 80° horn, it handles 50W AES, 200W peak and can produce 113dB peak output at 1 meter. It has a smooth frequency response and strong bass reproduction that extends down to 65Hz.
With a nominal impedance of 16 ohms, multiple speakers can be driven in parallel from a single channel of a low impedance amplifier, such as the Martin Audio VIA2004, thereby maximizing efficiency and minimizing cost. For full-bandwidth protection, the low and high-frequency sections are individually protected against overload.
Available in black or white as standard, it can be readily painted to match any décor, and can be wall-mounted vertically or horizontally using the wall bracket supplied. In addition, for general outdoor use the cabinet only requires the additional waterproof connector cover.
The VIA2004 amplifier in combination with a Martin Audio DX0.5 controller will be perfect partners for small scale efficient installations, or with the DX4.0 controller for larger more complex installations, which could then also be managed by Martin Audio’s VU-NET control software platform.
The Martin Audio SX110 subwoofer will extend the bandwidth of ADORN on-wall speakers and is ideal for foreground music applications which require increased impact and low frequency performance.
Features
Contemporary, unobtrusive design
High output capability
High fidelity sound
Low and high-frequency overload protection
Vertical or horizontal orientation
Wide 110° x 80° coverage
Wall bracket included
5-year warranty
Specification
TYPE: Ultra-Compact passive two-way system, front ported bass reflex
FREQUENCY RESPONSE (1): 90Hz-17kHz ± 3dB
-10dB @ 65
DRIVERS : LF: 5.25” /1” high-temp voice coil, coated paper, cone, rubber surround, ferrite motor, pressed steel chassis
HF: 0.75” silk dome, neodymium motor
RATED POWER (2): 50W AES, 200W peak
RECOMMENDED AMPLIFIER: VIA2004
SENSITIVITY(4): 90dB/1W/1m
MAXIMUM SPL (9): 113dB peak
NOMINAL IMPEDANCE: 16Ω
DISPERSION (-6DB): 110° H x 80° V
CROSSOVER: 3.5kHz passive (LF and HF auto-resetting fuses)
RECOMMENDED HIGH-PASS FILTER: 60Hz 24dB/oct
ENCLOSURE: ABS, UL 94V-0 rated
FINISH: White
GRILLE: Perforated steel
CONNECTORS: Push terminals
FITTINGS: Wall bracket included
DIMENSIONS EXCL. BRACKET: (W) 152mm x (H) 245mm x (D) 140mm
(W) 6in x (H) 9.6in x (D) 5.5in
WEIGHT: 2.21kg (4.9lbs)
Applications
Retail outlets
Cafes, bars and restaurant chains
Hotels and convention centers
Educational facilities
Corporate offices
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Pro packed & shipped USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed & shipped. Processing times vary, 2-30 days
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids
Martin Audio CDDCB5W-WR Ceiling Bracket for CDD5 Loudspeaker Installation
CEILING BRACKET FOR CDD5 Loudspeaker Vertical tilt and Weatherized for outdoor installation
Features:
Vertical tilt
Weatherized for outdoor installation
Available in White (CDDCB5W-WR)
Technical Specifications
WEIGHT 0.41kgs
MATERIAL Weatherized polyester powder coated steel
Applications
Installation of CDD5
Contents
1 x CDDCB5
4 x M5x16 CSK socket head
4 x M5 Nyloc
4 x M5 washer
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Pro packed & shipped USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed & shipped. Processing times vary, 2-30 days
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids
Martin Audio WB10/12W Wall Bracket for X10 X12 XP12 CDD10 CDD12 & Live 12 Speaker
WALL BRACKET FOR BLACKLINE X10, X12 AND XP12, CDD10, CDD12 AND CDD-LIVE12
Features:
Vertical and horizontal tilt and pan
Weatherized for outdoor installation
Available in White (WB10/12W)
Technical Specifications
WEIGHT 1.26kgs
MATERIAL Weatherized polyester powder coated steel
Applications:
Installation of Blackline X10, X12 and XP12, CDD10, CDD12
and CDD-LIVE12
Contents:
1 x WB10/12
4 x M8x20 counter-sunk socket head
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Pro packed & shipped USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed & shipped. Processing times vary, 2-30 days
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids
Martin Audio LE200 15 Inch Passive Two Way Bi Amp Stage Monitor Loudspeaker
Combining very high output capability with Martin Audio’s signature sonic performance and consistent coverage, the LE200 is the ultimate, everyday professional monitor. Its Coaxial Differential Dispersion drive unit comprises a powerful 15” (380mm)/3” (75mm) voice coil LF driver and a 1.4” (35mm) exit HF compression driver with a 3” (75mm) pure titanium diaphragm.
Utilizing Coaxial Differential Dispersion technology, the LE200’s horizontal coverage varies from 100° directly over the monitor, narrowing to 60° further back. This maintains the sound level and balance independent of distance from the monitor and produces a consistent near-rectangular coverage plane at head-height.
The LE200 enclosure is constructed from durable plywood, features integral ergonomic handles, and is finished with a hard-wearing, black textured paint. A strong, perforated steel grille with an acoustically transparent cloth backing provides protection for the Coaxial Differential Dispersion driver, while moulded feet prevent movement onstage and protect against scratches to the base of the monitor.
Switchable between bi-amp and passive operation, the LE200 incorporates an internal 1.6kHz passive crossover and four NL4 connectors located to suit a variety of user requirements. Compact and easy to manoeuvre, its exceptional performance, high output and consistent coverage makes the LE200 the definitive, affordable professional monitor for a wide range of applications.
Features:
Compact, two-way stage monitor
Coaxial ‘point-source’ performance
Differential Dispersion™ technology for consistent coverage
Defined, near-rectangular coverage plane at head-height
Switchable active/passive operation
Low-profile plywood enclosure
M8 rigging inserts
Multiple connectors for flexible deployment
Specification
TYPE: Two-way, bi-amp/passive Coaxial Differential Dispersion
FREQUENCY RESPONSE (5): 68Hz-18kHz ± 3dB,
-10dB @ 50Hz
DRIVERS : LF: 15” (380mm)/3” (75mm) voice coil, long excursion, shared ferrite motor system with HF
HF: 1.4” (32mm) exit/3” (75mm) voice coil, titanium dome compression driver
RATED POWER (2): 400W AES, 1600W peak
SENSITIVITY (8) LF: 100dB, HF: 103dB
Passive: 100dB
MAXIMUM SPL (9): 133dB peak
NOMINAL IMPEDANCE: LF/FR: 8Ω
HF: 8Ω
DISPERSION (-6DB): 100°-60° horizontal, 60° vertical
CROSSOVER: 1.2kHz active/passive (switchable)
ENCLOSURE: Birch/poplar ply
FINISH: Black textured paint
PROTECTIVE GRILLE: Black perforated steel with scrim cloth backing
BAFFLE ANGLE: 30˚
CONNECTORS: 4 x NL4 type
PIN CONNECTIONS: LF/FR: 1+/-
HF: 2+/-
FITTINGS: 2 x pocket handles
Protective rubber feet on base and sides
4 x M8 inserts
DIMENSIONS: (W) 610mm x (H) 364mm x (D) 562mm
(W) 24.0ins x (H) 14.3ins x (D) 22.1ins
DIMENSIONS INCL FEET: (W) 616mm x (H) 367mm x (D) 562mm
(W) 24.2ins x (H) 14.4ins x (D) 22.1ins
WEIGHT: 26kg (57.3lbs)
Applications:
Stage monitor
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Pro packed & shipped USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed & shipped. Processing times vary, 2-30 days
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids
Martin Audio SXTC118 Transits Cover For SXP118 Loudspeaker System
Transits cover SXP118 Loudspeaker Tour-grade Cut-outs for easy access to handles and protects loudspeakers in transit
Features:
Tour-grade transit covers
Cut-outs for easy access to handles
Custom fit to specific loudspeakers
Protects loudspeakers in transit
Protective locatable grille board with VELCRO® Brand straps*
Elasticated corners to accommodate optional wheels*
*SX Series only
Applications:
Touring and transport of SXP118 Loudspeaker
Contents:
1 x transit cover
Technical Specifications
MATERIAL PVC backed Nylon, felt padding
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Pro packed & shipped USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed & shipped. Processing times vary, 2-30 days
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids
Martin Audio XE300 12" Two Way Bi amp Passive Compact Stage Monitor Loudspeaker
The XE300 is the definitive, high-performance compact monitor. It features a high-specification 12” (300mm) LF /1.4” exit HF Coaxial Differential Dispersion driver to deliver perfect sound over the artist’s listening plane. The LF driver section has a 3” (75mm) voice coil and efficient motor with an aluminum demodulating ring to minimize distortion, while the HF driver utilizes a 1.4” (35mm) exit HF compression driver with a 3” (75mm) pure titanium diaphragm.
Its unique Coaxial Differential Dispersion technology produces a horizontal coverage pattern which varies from 60° when the performer is directly over the monitor, narrowing to 30° further back. This narrowing delivers a near-rectangular coverage plane at head-height to maintain the sound level and balance independent of distance from the monitor.
The XE300 enclosure is constructed from multi-laminate birch ply, with integral ergonomic handles and finished with a hard-wearing paint. A strong, perforated steel grille with an acoustically transparent cloth backing provides protection for the Coaxial Differential Dispersion driver, while moulded feet on the base prevent movement onstage with additional rubber feet on the side panels providing added protection if the monitor is upended when carrying.
Frontal reflex ports couple with the floor to increase LF output and inbuilt risers can be used to increase the monitoring angle for longer-throw applications.
XE Series monitors are designed as a complete system with the iK42 4-channel Class D Amplifier, offering a unique combination of power and audio performance seamlessly combined with advanced DSP, proprietary VU-NET™ software control and Dante™ digital audio networking. State of the art components and a finely optimised design results in generous power reserves that ensures pristine sound quality is maintained even under the most extreme conditions. As well as maximising the capability of the monitor, this ensures that the monitor engineer and artist can be confident that they will experience this same high level of consistent performance from an XE monitor anywhere in the world.
Features:
Very high-SPL, compact two-way stage monitor
Coaxial ‘point source’ performance
Differential Dispersion™ technology for consistent coverage
Defined, rectangular coverage plane at head-height
Complete system with iK42 for consistent high performance
Visually-appealing, low-profile plywood enclosures
Built-in risers for steeper monitor angle when required
Side panel rubber feet for extra protection when up-ended
Easy to carry and manoeuvre
M8 rigging inserts
Applications:
Stage monitor
Specification
TYPE: Two-way, bi-amp/passive, Coaxial Differential Dispersion Stage Monitor
FREQUENCY RESPONSE (5): 67Hz-18kHz ± 3dB,
-10dB @ 55Hz
DRIVERS : LF: 12” (300mm)/3” (75mm) voice coil, dual-gap neodymium motor system
HF: 1.4” (35mm) exit/3” (75mm) voice coil, titanium dome compression driver
RATED POWER (2): LF: 350W AES, 1400W peak
HF: 80W AES, 320W peak
MAXIMUM SPL (9): Bi-amp: 140dB peak. Passive: 139dB peak
SYSTEM AMPLIFIER: iKON® iK42
NOMINAL IMPEDANCE: LF/FR: 6Ω
HF: 8Ω
DISPERSION (-6DB): 60-30° horizontal, 90° vertical
CROSSOVER: 1.1kHz
ENCLOSURE: Birch/beech ply and hardwood
FINISH: Textured black paint
PROTECTIVE GRILLE: Black perforated steel with scrim cloth backing
BAFFLE ANGLE: 27.5° (40° with risers)
CONNECTORS: 4 x NL4 type
PIN CONNECTIONS: LF/FR: 1+/-, HF: 2+/-
FITTINGS: 2 x pocket handles
Protective rubber feet on base and sides
Built-in risers
4 x M8 inserts
DIMENSIONS: (W) 550mm x (H) 290mm x (D) 470mm
(W) 21.7ins x (H) 11.4ins x (D) 18.5ins
DIMENSIONS INCL FEET: (W) 556mm x (H) 293mm) x (D) 470mm
(W) 21.9ins x (H) 11.5ins x (D) 18.5ins
WEIGHT: 19kg (41.9lbs)
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Pro packed & shipped USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed & shipped. Processing times vary, 2-30 days
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids
Martin Audio ASF20048 Universal Bracket Assembly Loudspeaker CDD-LIVE15 and XD15
The Martin Audio ASF20048 is for CDD-LIVE15 and XD15 Loudspeaker Universal Bracket Assembly. You can use this bracket with a scaffold clamp or with the ASF20045 pole mount adaptor. It can be used for flown applications either in Vertical and horizontal tilt and pan mode.
Features:
Weatherized for outdoor use
Vertical and horizontal tilt and pan
Specifications:
Weight: 6lbs
Material: Weatherized polyester powder coat steel
Includes:
ASF20048 Universal Bracket
(4) M10 washer
(2) M10 Nylon washer
(2) M8 x 35mm Csk Screw
XD universal Bracket extension block
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Pro packed & shipped USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed & shipped. Processing times vary, 2-30 days
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids
Martin Audio CDD6BTX-WR 6" Two Way Passive Micro Loudspeaker 70/100V Transformer
The CDD6TX-WR is a weatherized two-way passive micro speaker incorporating a 70V/100V line transformer and designed for discreet positioning in architectural installations — including bars, museums, foyers, concourses, exhibition centers and HoW as well as outdoor applications where it will be subject to changing environmental conditions, but sheltered from direct exposure to the elements. It can reproduce surprisingly high levels of music program and can also be used as a fill system in conjunction with larger CDD Series. It features a 6.5” (165mm) LF/1” (25mm) HF Coaxial Differential Dispersion driver inside an elegant UPM Formi composite enclosure with a dual cable gland for easy daisy-chaining of cabinets without the need for external breakout boxes.
The Coaxial Differential Dispersion technology employed in the CD6TX-WR delivers more consistent audience coverage than systems with fixed X° x Y° coverage patterns — projecting relatively more output to the rear of the audience to distribute sound evenly front-to-back, while having wide horizontal coverage close-up. Its innovative CDD driver achieves ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response in the crossover region associated with non-coaxial designs. Improving on conventional coaxial designs, which can suffer from high-frequency beaming, the driver features a static waveguide that merges seamlessly with the unique cone shape — maintaining the dispersion pattern out to very high frequencies.
The visually-distinctive enclosure can be used in either horizontal (landscape) or vertical (portrait) orientation, with rotation of the driver easily accomplished by removing the screw-free, protective grille. The curved shape of the enclosure allows it to be surface-mounted close to a wall or ceiling by means of the supplied omni-directional bracket or an optional close-mount ceiling bracket.
CDD6TX-WR features a water and particle resistant grille made from zinc plated mild steel with powder coated finish and is suitable for operating temperatures between -20°C to +70°C and environmentally tested to meet IP54 .
Finished in black (RAL9005) or white (RAL9016) as standard, with any RAL color to order. A full-range, passive two-way system, the CDD6TX-WR should be used with a compatible controller with appropriate limiter settings to provide system protection.
When used with the DX4.0 controller or an iKON amplifier, there are now enhanced DSP and FIR based pre-sets to deliver the absolute maximum performance and fidelity while limiter settings protect the integrity of the system.
Features:
Ultra-Compact, CDD™ passive two-way system
Coaxial Differential Dispersion™ technology
Elegant UPM Formi composite enclosure
Outdoor operation when sheltered from direct exposure to elements
Operating temperature -20°C to +70°C
Environmentally tested to meet IP54
User-rotatable coaxial drive unit
Vertical and horizontal mounting options
Screw-free water and particle resistant grille
8Ω nominal impedance
Discreet weatherized mounting accessories
White standard color options
70V/100V line transformer
Applications:
Bars and Restaurants
Museums and AV spaces
Convention Centres
Hotels
Retail Outlets
Leisure Centers
Houses of Worship
Outdoor Restaurants, Bars, Hotel areas
Nearfield Systems in Outdoor Stadia
Transport Hubs
Concourses and Theme Parks
Specification:
TYPE: Ultra-Compact, Coaxial Differential Dispersion passive two-way system
FREQUENCY RESPONSE (5): 80Hz-20kHz ±
-10dB @ 70Hz
DRIVER: LF: 6.5” (165mm)/1.5” (38mm) voice coil, long excursion, ferrite motor system
HF: 1” (25mm) voice coil, fabric dome with neodymium motor system
RATED POWER (2): 150W AES, 600W peak
TRANSFORMER SETTINGS: 100V line: 12.5W, 25W, 50W
70V line: 6.5W, 12.5W, 25W, 50W
SENSITIVITY (8): 91dB
MAXIMUM SPL (9): 113dB continuous, 119dB peak
6.2W=99dB, 12.5W=102dB, 25W=105dB, 50W=108dB.
NOMINAL IMPEDANCE 8Ω
DISPERSION (-6DB): 110°-80° horizontal, 80° vertical (user-rotatable)
CROSSOVER: 2.5kHz passive
ENCLOSURE: 9 litre, composite material
FINISH: White as standard
PROTECTIVE GRILLE: Zinc plated mild steel with powder coated finish and weatherised backing
ENVIRONMENTAL: Rated at IP54
CONNECTORS: Low profile 13A push-lock, weatherproof input panel cover with dual cable glands
PIN CONNECTIONS: Left to right: Input+, Input -, Link -, Link +
FITTINGS: 4 x M6 inserts for wall/ceiling brackets
DIMENSIONS: (W) 210mm x (H) 325mm x (D) 210mm
(W) 8.3ins x (H) 12.8ins x (D) 8.3ins
WEIGHT: 6.77kg (14.93lbs)
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Pro packed & shipped USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed & shipped. Processing times vary, 2-30 days
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids
Martin Audio CDDCB6/8W Ceiling Bracket for CDD6 CDD8 LIVE8 Speaker Installation
Ceiling bracket for CDD6, CDD8 AND CDD-LIVE8 Loudspeaker Installation. Vertical tilt and weatherized for outdoor.
Features:
Vertical tilt
Weatherized for outdoor installation
White (CDDCB6/8W-WR)
Applications:
Installation of CDD6, CDD8 and CDD-LIVE8
Contents
1 x CDDCB6/8
4 x M6x20 CSK socket head
Specifications:
WEIGHT: 1.52kgs
MATERIAL: Weatherized polyester powder coated steel
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Pro packed & shipped USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed & shipped. Processing times vary, 2-30 days
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids
Martin Audio CDDLTC15 Transits Cover for CDD live 15 Loudspeaker system
Transits Cover for CDD live 15 Loudspeaker. Cut-outs for easy access to handles Protects loudspeakers in transit.
Features:
Tour-grade transit covers
Cut-outs for easy access to handles
Custom fit to specific loudspeakers
Protects loudspeakers in transit
Protective locatable grille board with VELCRO® Brand straps*
Applications:
Touring and transport of CDD-LIVE 15
Contents:
1 x transit cover
Specifications:
MATERIAL PVC backed Nylon, felt padding
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Pro packed & shipped USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed & shipped. Processing times vary, 2-30 days
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids
Martin Audio A40TB 4 Inch Ultra Compact Two Way Passive Loudspeaker System
The ADORN A40 is a two-way passive speaker with an elegant design that is perfect for architectural environments that require high-fidelity sound from an unobtrusive, ultra-compact enclosure. It brings class-leading performance, reliability and value to a wide range of commercial sound applications — from retail outlets, bars and restaurants to corporate offices and convention centres.
The A40 is the perfect choice for background and foreground systems which require superior performance. Its Martin Audio signature sound characteristic also provides a seamless sonic transition within a multi-zoned complex using larger Martin Audio systems such as CDD or BlacklineX.
Comprising a 4” (100mm) LF driver and a 0.75” (19mm) silk-dome HF driver on a 110° x 80° horn, it handles 40W AES, 160W peak and can produce 109dB peak output at 1 metre. It has a smooth frequency response and strong bass reproduction that extends down to 70Hz.
With a nominal impedance of 16 ohms, multiple speakers can be driven in parallel from a single channel of a low impedance amplifier, such as the Martin Audio VIA2004, thereby maximising efficiency and minimising cost. For full-bandwidth protection, the low and high-frequency sections are individually protected against overload.
Available in black or white as standard, it can be readily painted to match any décor, and can be wall-mounted vertically or horizontally using the wall bracket supplied. In addition, for general outdoor use the cabinet only requires the additional waterproof connector cover.
The VIA2004 amplifier in combination with a Martin Audio DX0.5 controller will be perfect partners for small scale efficient installations, or with the DX4.0 controller for larger more complex installations, which could then also be managed by Martin Audio’s VU-NET control software platform.
The Martin Audio SX110 subwoofer will extend the bandwidth of ADORN on-wall speakers and is ideal for foreground music applications which require increased impact and low frequency performance.
Features:
Contemporary, unobtrusive design
High output capability
High fidelity sound
Low and high-frequency overload protection
Vertical or horizontal orientation
Wide 110° x 80° coverage
Wall bracket included
5-year warranty
Applications:
Retail outlets
Cafes, bars and restaurant chains
Hotels and convention centers
Educational facilities
Corporate offices
Specification:
TYPE: Ultra-Compact passive two-way system, front ported bass reflex
FREQUENCY RESPONSE (1): 98Hz-17kHz ± 3dB
-10dB @ 70Hz
DRIVERS: LF: 4” /1” high-temp voice coil, coated paper cone, rubber surround ferrite motor, pressed steel chassis
HF: 0.75” silk dome, neodymium motor
RATED POWER (2): 40W AES, 160W peak
RECOMMENDED AMPLIFIER: VIA2004
SENSITIVITY(4): 87dB/1W/1m
MAXIMUM SPL (9): 109dB peak
NOMINAL IMPEDANCE: 16Ω
DISPERSION (-6DB): 110° H x 80° V
CROSSOVER: 3.5kHz passive (LF and HF auto-resetting fuses)
RECOMMENDED HIGH-PASS FILTER: 60Hz 24dB/oct
ENCLOSURE: ABS, UL 94V-0 rated
FINISH: Black
GRILLE: Perforated steel
CONNECTORS: Push terminals
FITTINGS: Wall bracket included
DIMENSIONS EXCL. BRACKET: (W) 124mm x (H) 200mm x (D) 114mm
(W) 4.9in x (H) 7.9in x (D) 4.5in
WEIGHT: 1.75kg (3.9lbs)
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Pro packed & shipped USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed & shipped. Processing times vary, 2-30 days
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids
Martin Audio CDD6W 6.5 Inch Ultra Compact Two Way Passive Loudspeaker System
The ultra-compact CDD6 is a two-way passive loudspeaker system designed to fulfil the requirement for full-frequency dynamic performance from a very small enclosure. Featuring a 6.5” (165mm) LF/1” (25mm) HF Coaxial Differential Dispersion driver, its extremely small size and sleek lines make it ideal for visibly-unobtrusive applications. It can also be used as a fill system in conjunction with larger CDD Series models and, with the addition of an SX subwoofer, can reproduce surprisingly high levels of music program.
The Coaxial Differential Dispersion technology employed in the CDD6 delivers more consistent audience coverage than systems with fixed X° x Y° coverage patterns — projecting relatively more output to the rear of the audience, while having wide horizontal coverage close-up. Its innovative CDD driver achieves ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response associated with non-coaxial designs. Improving on conventional coaxial designs, which can suffer from high-frequency beaming, the driver features a static waveguide that merges seamlessly with the unique cone shape — maintaining the dispersion pattern out to very high frequencies.
The visually-distinctive enclosure can be used in either horizontal (landscape) or vertical (portrait) orientation, with rotation of the driver easily accomplished by removing the screw-free, protective grille. The curved shape of the enclosure allows it to be surface-mounted close to a wall or ceiling by means of optional wall and ceiling brackets.
Finished in black (RAL9005) or white (RAL9016) as standard, the CDD6 can be supplied in any RAL colour to order.
A full-range, passive two-way system, the CDD6 should be used with a compatible controller with appropriate limiter settings to provide system protection.
When used with the DX4.0 controller or an iKON amplifier, there are now enhanced DSP and FIR based pre-sets to deliver the absolute maximum performance and fidelity while limiter settings protect the integrity of the system.
Features:
Ultra-Compact, CDD™ passive two-way system
Coaxial Differential Dispersion™ technology
Elegant UPM Formi composite enclosure
User-rotatable coaxial drive unit
Vertical and horizontal mounting options
Screw-free perforated steel grille
8Ω nominal impedance
Discreet mounting accessories
White standard color options
Specification:
TYPE: Ultra-Compact, Coaxial Differential Dispersion passive two-way system
FREQUENCY RESPONSE (5): 80Hz-20kHz ± 3dB, -10dB @ 70Hz
DRIVER: LF: 6.5” (165mm)/1.5” (38mm) voice coil, long excursion, ferrite motor system
HF: 1” (25mm) voice coil, fabric dome with neodymium motor system
RATED POWER (2): 150W AES, 600W peak
SENSITIVITY (8): 91dB
MAXIMUM SPL (9): 113dB continuous, 119dB peak
NOMINAL IMPEDANCE: 8Ω
DISPERSION (-6DB): 110˚-80˚ horizontal, 80˚ vertical (user-rotatable)
CROSSOVER: 2.5kHz passive
ENCLOSURE: 9 litre, composite material
FINISH: white textured paint
PROTECTIVE GRILLE: Wwhite perforated steel with scrim cloth backing
CONNECTORS: Low profile 13A push-lock
PIN CONNECTIONS: Left to right: Input+, Input -, Link -, Link +
FITTINGS: 4 x M6 inserts for wall/ceiling brackets
DIMENSIONS: (W) 210mm x (H) 325mm x (D) 210mm
(W) 8.3ins x (H) 12.8ins x (D) 8.3ins
WEIGHT: 5.69kg (12.54lbs)
Applications:
Bars and Restaurants
Museums and AV Spaces
Convention Centres
Hotels
Retail Outlets
Leisure Centers
Houses of Worship
Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.
Shipping --Pro packed & shipped USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed & shipped. Processing times vary, 2-30 days
Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new.
What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids