AVIOM

Aviom D400 A Net Distributor for Analog Input Modules or Digital Console Cards

Like the D800 family of A-Net Distributors, the D400 provide robust, reliable connectivity, delivering power and high fidelity digital audio to your Aviom Personal Mixers—at an unbeatable price.

The D400 can be used with A640, A360, A320, and A-16II Personal Mixers in any combination.

The D400 A-Net Distributors provide the link between the personal mixing system's inputs and the Personal Mixers, providing DC power and a copy of the A-Net digital audio stream to your Aviom Personal Mixers, utilizing standard Cat-5e cables.

There are two versions of the D400 product. The standard D400 has an Aviom A-Net input, perfect for using with Aviom's analog input modules or digital console cards from Aviom or our third party partners.

Connecting to Analog or Digital Consoles
For personal mixing systems that use one or more analog input modules (AN-16/i v.2, AN-16/i-M, or legacy AN-16/i) or an A-Net console card (such as the Y1 A-Net Card for Yamaha digital consoles), use the standard D400 with the Aviom A-Net input.

With one Pro16 A-Net In and eight powered A-Net Outs, you can provide power and audio for up to eight Aviom Personal Mixers. And the D400 includes an unpowered A-Net Out as well, perfect for connecting additional A-Net Distributors for systems with more than eight Personal Mixers. Learn more about expanding...

Specifications:
A-Net Out to Personal Mixers:
Eight RJ45 connectors, powered;
Compatible with A640, A360, A320, and A-16II Personal Mixers
A-Net Out:
Pro16e A-Net;
RJ45 connector, unpowered
Supports system expansion and the A-16II, A320, and A360 Personal Mixers
LEDs: Power On (red); Network Sync (green)
Stereo Link:
Two 8-position DIP switch blocks (1-16, 17-32)
Output Voltage for Personal Mixers:
24VDC, 0.5 amp;
Transmitted over the Cat-5e cable
A-Net Cables:
Front Panel Connections: Shielded Cat-5e (or better) cable must be used to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits.
Unshielded Cat-5e cable may be used on all other network connections
Power Supply: Internal, IEC connector
Input Voltage: 100-120 VAC or 200-240 VAC (with selector switch); 50-60Hz @220 W max
AC Fuse Types:
115V range: T2.5AL/250V, slow-acting
230V range: T1.25AL/250V; slow-acting
Dimensions: 19" (482.6 mm) wide x 7.25" (182 mm) deep; 2U, 3.5" (88.9 mm) high
Weight: 12.0 lbs (5.44 kg)

D400 A-Net Distributor Specifications
A-Net Input:
Pro16e Aviom A-Net;
RJ45 connector
A-Net Offset Base Slot: 3-position DIP switch selects the starting channel that Personal Mixers will receive from the network (1, 17, 33, or 49)

Aviom A320 A-Net Personal Mixer with 32-Channel Mix Engine 16 Mono or Stereo

The A320 Personal Mixer gives performing and recording musicians simple, intuitive control over their monitor mixes. The A320 gives musicians the ability to get clear, musical monitor mixes every time they play.

Ideal for use with in-ear monitors and headphones, the A320 gives musicians powerful control over their mix, while also preserving the simplicity required for use while performing. The A320 is compatible with all existing and legacy Aviom personal mixing systems and can be used simultaneously with the A640, A360, and/or A-16II Personal Mixers.

Made for the musician
Musicians are not engineers, and mixing while playing music or singing is very different than just mixing. That's why the A320 is designed with such a clean user interface. No clutter. No menus. Just quick access to the mixing controls you need.

Simple to its core
The A320 doesn't have a lot of bells and whistles. By design. Because when you're focused on playing music, bells and whistles can just get in the way. That's why the A320 gives musicians the controls that matter most for adjusting their monitor mix and keeps the rest out of the way.

Stereo clarity in every channel
Each of the 16 mix channels on the A320 can host a mono or a stereo source. That means you can preserve the fidelity of your stereo instruments and submixes from the console without giving up another mix source in your personal mixer. And that translates directly into clearer, more natural sounding monitor and cue mixes.

Rich, vibrant sound quality, especially with in-ears
The A320's master tone filters are easy to use—even if you don't know a thing about EQ—and they'll help your in-ear monitors sound their best, no matter what type of music you play.

Rugged and reliable
From the enduring simplicity of the mechanical design to the elegant efficiency of the embedded software, the A320 is built to work when you need it to work and to withstand the abuses of life on stage and in the studio.

Consistency night after night
The A320 includes space for eight mix presets, so you can save your favorite mixes and get reliable results in your monitors every time you play.

The A320 Personal Mixer is also available in a bundle with a set of MEE Audio M6 Pro IEMs. These great sounding single-driver earbuds feature a detachable, replaceable cord and come with an assortment of flexible ear tips that reduce outside noise and allow you to easily find the most comfortable fit for your ears. Each set also includes custom-engraved metal faceplates and a protective case.

Features:
16 mono or stereo sources
32-channel mix engine
Per-channel volume and Stereo Placement
Eight customizable mix presets
Three-band master tone controls optimized for in-ear monitors
Per-channel solo and mute
Compatible with existing Aviom personal mixing systems

Technical Specifications:
Audio Output: 1/4" TRS stereo, headphone or line level
Stereo Mix Output, Headphone/Line:
Tip: Audio Left;
Ring: Audio Right;
Sleeve: Ground
A-Net I/O:
1 A-Net In, RJ45 connector;
Supports Pro16 (16-channel) and Pro16e (32-channel)
D/A Conversion 44.1/48kHz, 24-bit
Stereo Operation:
Stereo Link, per channel pair;
Set at the input module;
Variable pan per mono channel or pan/spread per stereo channel pair
Headphone Output: 275 mW per side into 50 Ohms (both sides driven)
Output Impedance: 5 Ohms
Freq. Response: 3Hz-22kHz +0.2dB/-3dB at 50 Ohms
THD +N: < 0.003%
Output Voltage for Personal Mixers:
24VDC, 0.5 amp
Transmitted over the Cat-5e cable
Signal to Noise (unweighted): -106dB (measured with zero data into all channels)
Latency: 0.880 msec (measured from analog input to analog output)
Pro16e A-Net:
Use Cat-5e (or better) cable;
Maximum 400 ft (122 m) between devices;
Supports Power Over A-Net
Cat-5 cable: Use shielded Cat-5e (or better) cable to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits.
Power:
24 VDC, 0.5 amp;
Power is supplied over the Cat-5 cable when connected to an Aviom
A-Net Distributor (required)
Dimensions: 10.26" (260.6 mm) wide x 6.14" (155.95 mm) deep x 1.91" (48.51 mm) high
Weight: 1.3 lb. (0.59 kg)
Options: MT-1a Mic Stand Mount

Aviom D800-DANTE A Net Distributor w/ A Net Bridge Input and Dante Interface

D800-Dante A-Net Distributors provide the link between the Dante network, input module, or console card and the Personal Mixers, providing power and a copy of the digital audio stream to your Aviom Personal Mixers, utilizing standard cables.

Both units also integrate additional advanced options for delivering high-channel-count audio streams to your Personal Mixers, streamlining connections between A640 and A360 Personal Mixers and transmitters for wireless in-ear monitors.

D800-Dante can be used with A640*, A360, A320, and A-16II Personal Mixers in any combination.

the D800-Dante do an unglamorous but important job: get power and audio to your Personal Mixers. Set-up is a breeze, with no IP addressing, routing, or switch managing to worry about, so you can get set up and start mixing in no time, without a lot of hassle.

With the D800-Dante, you can run your Dante network at 44.1/48kHz, 88.2/96kHz, or 176.4/192kHz. At higher sample rates, the D800-Dante converts the audio data to 48kHz for distribution to the Aviom Personal Mixers (and other A-Net devices).

If you need more than eight Personal Mixers, the D800-Dante include an A-Net Out port on the rear panel—perfect for sending the incoming audio stream (regardless of its original source) on to additional A-Net Distributors. Learn more about expanding your system.

D800-Dante manage communication between A360 Personal Mixers and supported iOS devices, allowing users to run the A360 Display™ app alongside their A360.

Features:

• Distributes power and audio to up to eight A360,

• A320, A-16II, and A-16R Personal Mixers

• One Pro16e A-Net In supports A-Net Bridge input from up to four synchronous Pro16 A-Net streams

• Network Mix Back for streamlined connections to wireless IEM transmitters

• Ethernet support for iOS devices over Wi-Fi

• One Pro16e A-Net Out for thru connections

• Heavy-duty locking connectors for all audio connections

• Direct connectivity to a Dante™ audio network

• Support for up to 64 Dante network channels

Specifications:
A-Net to/from Personal Mixers (front panel): Eight locking RJ45 connectors, powered; Compatible with A-16II, A320, and A360 Personal Mixers; 2-position switch (I/II) accommodates A-16II and A320 (I) and the bidirectional A360 Personal Mixer (II)
A-Net In or A-Net Bridge In: Accepts Pro16 or Pro16e A-Net; one locking RJ45 connector
A-Net Out (rear panel): Pro16e A-Net; one locking RJ45 connector, unpowered Supports system expansion and the A-16II, A320, and A360 Personal Mixers
A-Net Mixes Out: Pro16e A-Net; One locking RJ45 connector, unpowered; Provides up to 16 channels (8 stereo pairs) of Network Mix Back™ data from up to eight A360 Personal Mixers
Ethernet: One RJ45 connector; for iOS A360 Display support
LEDs: Power On (red); Sync (green)
USB: Used for firmware updates
A-Net Cables: Front Panel Connections: Shielded Cat-5e (or better) cable must be used to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits. Unshielded Cat-5e cable may be used on all rear panel connections
Output Voltage for Personal Mixers: 24VDC, 0.5 amp Transmitted over the Cat-5e cable
Power Supply: Internal, universal switching type, IEC connector
Input Voltage: 100-240VAC, 50-60Hz, 300W Fuse - 250VAC~ T4AL
Dimensions: 19" (482.6 mm) wide x 14.25" (362 mm) deep; 2U, 3.5" (88.9 mm) high
Weight: 12.0 lbs (5.44 kg)

Aviom MT-1A Microphone Stand Mount for A640 A320 A360 A-16II A-16CS Mixer

The MT-1a attaches with three screws to the bottom of an A640 Personal Mixer, A360 Personal Mixer, A320 Personal Mixer, A-16II Personal Mixer, or A-16CS Control Surface and mounts on any standard mic stand with the ring nuts supplied.

With an optional right-angle attachment, the EB-1 Extension Bracket, you can mount a mixer or control surface on the shaft of an existing mic or music stand.

The MT-1a is used to mount an A640 Personal Mixer, A360 Personal Mixer, A320 Personal Mixer, A-16II Personal Mixer, or the A-16CS Control Surface on a standard mic stand (locking nut included).

Features:

• Attaches to any standard mic stand

• Threaded ring nuts included

Specifications:
Boxed Weight: 1 lb
Boxed Dimensions: 7"w x 5"d x 3"h
Dimensions: 6.25" wide at front x 4.5" wide at rear x 3" high
Connections: Attaches with three screws to bottom of an A640, A320, A360, A-16II, or A-16CS
Connectors: Screw Size: 6-32, 1/4-inch (6.35mm) long screws (includes three)