RF Venue

RF Venue DFINBDISTRO4 4 Channel Antenna Distributor for Wireless Microphone Bundle

Diversity Fin Antenna
The Diversity Fin® Antenna is a multi-purpose antenna for wireless microphones that doesn’t drop out by using our patented cross-polarized design. It provides a diversity solution in a single package by combining one log-periodic dipole array (LPDA) and one dipole antenna in an orthogonal (right angle) configuration. One element captures vertically polarized waves, and the other horizontally polarized waves.

Unlike traditional “paddle” or “shark fin” antennas, the Diversity Fin allows receivers to see a constant signal regardless of microphone orientation - allowing the user to hold a wireless microphone in any position relative to the antenna without signal loss. A single Diversity Fin provides superior coverage to two traditional, shark fin antennas, allowing savings as well as reduced time to installation.

The Diversity Fin requires no external power and works with all wireless brands, analog and digital. It replaces two standard paddle antennas at a lower cost with better performance and easier installation. Setup is easier as the 2 coax cables required for diversity receivers are terminated at the same location.

DISTRO4 Antenna Distributor
DISTRO4 is an 4-way active antenna splitter plus cascade port with external power that allows you to share one pair of diversity antennas with up to 5 wireless receivers. Built in a full metal housing it ships with 8 BNC cables and 4 dc power cables to connect up your receivers. Multiple DISTRO4s can be connected together up to 25 receivers to a single diversity pair of antennas.
To utilize directional antennas with more than two receivers, an antenna distributor is the right tool for the job. With a single Diversity Fin and DISTRO4, you can avoid crosstalk bleed from multiple whip antennas, and remove questionable wall warts and unneeded powerstrips that can cause other avoidable issues.

Whether you have a small stage setup with 4 wireless microphones, or a larger venue with 25 wireless microphones, DISTRO4 ensures reliable RF signal to your receivers from the A and B outputs of a single Diversity Fin antenna, removing chances of dropping out from multipath reflections and cross-polarization fades.

DISTRO4 features a 2000 mA internal power supply (no wall wart) and compares to antenna distributors twice its price. It includes all RF and DC power cables needed to connect a 4 channel wireless microphone system as well as cascade to one additional DISTRO4.

Coax Cables
Coaxial cabling can make the difference between flawless RF performance and total system failure. Even the slightest crimp or ding in coaxial cable can cause signals to drop sharply or short out.

RF Venue provides premium made in USA low loss, 50 ohm RG8X coaxial cable with BNC male connectors for wireless audio applications. Our cables are custom run to our specifications: double shielded braid over foil with a perfect balance between loss and flexibility. We terminate in-house and QC on calibrated Keysight network analyzers for guaranteed performance. (2) 25' cables included.

Features:
Patented polarization Diversity Fin® Antenna system reduces signal dropouts
4 Channel antenna distribution with internal power supply and cascade ports
Two 25’ Premium made in USA low loss double shielded coaxial cables

(1) Diversity Fin Antenna (BLACK Install Version)
(1) DISTRO4 antenna distribution system
(2) 25’ RG8X coaxial cable

RF Venue DFINB The Diversity Fin Antenna for Wireless Microphone w/ Wall Bracket

The Diversity Fin® Antenna is a multi-purpose antenna for wireless microphones that doesn’t drop out by using our patented cross-polarized design. It provides a diversity solution in a single package by combining one log-periodic dipole array (LPDA) and one dipole antenna in an orthogonal (right angle) configuration. One element captures vertically polarized signals, and the other horizontally polarized signals.

Unlike traditional “paddle” or “shark fin” antennas, the Diversity Fin allows receivers to see a constant signal regardless of microphone orientation - allowing the user to hold a wireless microphone in any position relative to the antenna. A single Diversity Fin provides superior coverage to two traditional, shark fin antennas, allowing savings as well as reduced time to installation.

The Diversity Fin requires no external power and works with all wireless brands, analog and digital. It replaces two standard paddle antennas at a lower cost with better performance and easier installation. Setup is faster for live performance since both cable runs required for diversity receivers are terminated at the same location.

Incorporates both directional log-periodic dipole array (LPDA) and bidirectional dipole elements
Captures both horizontal and vertically polarized waves in single unit
Achieves optimal polarization diversity reception
Improves signal consistency in indoor reflective environments
One Diversity Fin replaces two traditional LPDA antennas
Available with a padded cover as well as in matte black models for permanent wall mount installations.

Features:
Frequency Range 470 - 698 MHz
Architect-friendly (unmarked) matte Black
Standard configuration includes Water Resistant Padded Cover
Mounting block accepts 5/8-27, 1/4-20, AND 3/8-16 stands
Custom Logo Printing Available on Cover

What's Included:
Black Diversity Fin Antenna
Black wall mount bracket

RF Venue D-ARC Diversity Architectural Antenna UHF Wireless Microphones

The new Diversity Architectural Antenna by RF Venue is a high performance antenna system for wireless microphones. Featuring a slim profile enclosure, the Diversity Architectural Antenna can be installed in any position on a wall or ceiling and can be painted to match any interior. Using a unique patent-pending dual-feed antenna design, both A and B diversity connections are provided, so there’s no need to install two separately spaced antennas resulting in a more professional look that room designers and architects appreciate.

The Diversity Architectural antenna installs in minutes, with a wall or ceiling-mounted rear plate that is pre-drilled with multiple mounting hole options. The rear plate then simply connects to the front plate, secured with the included mounting screws. Simply connect the two rear-mounted BNC terminated coaxial cables to your in-wall or in-ceiling coaxial cable run and the Diversity Architectural is ready for use.

The Diversity Architectural antenna builds on the highly acclaimed Diversity Fin, eliminating the most common signal dropouts caused by changes in angle and orientation of the RF signal. Ideally suited for conference rooms, multi-purpose meeting spaces, training rooms, and houses of worship, the Diversity Architectural fits into any interior design and delivers professional RF performance in a sleek industrially designed enclosure.

Features:
Diversity Architectural Antenna
Lower cost - easy installation
Two antennas in one package
Doesn't Drop Out
Blends into any background

RF Venue 2X1SPLIT Passive Signal Splitter Combiner for Multi Channel Microphone Systems

Use the 2x1Split to make an 8 channel IEM combiner, create a distributed antenna system, or to tap into your spectrum analyzer to get more insight into your setup.

Features:
Passive Splits
Splits a single RF connection to two or combines two to one

RF Venue DFINDISTRO4 4 Channel Distributor and Antenna Package for Wireless Microphone

The Diversity Fin® Antenna is a multi-purpose antenna for wireless microphones that doesn’t drop out by using our patented cross-polarized design. It provides a diversity solution in a single package by combining one log-periodic dipole array (LPDA) and one dipole antenna in an orthogonal (right angle) configuration. One element captures vertically polarized waves, and the other horizontally polarized waves.

Unlike traditional “paddle” or “shark fin” antennas, the Diversity Fin allows receivers to see a constant signal regardless of microphone orientation - allowing the user to hold a wireless microphone in any position relative to the antenna without signal loss. A single Diversity Fin provides superior coverage to two traditional, shark fin antennas, allowing savings as well as reduced time to installation.

The Diversity Fin requires no external power and works with all wireless brands, analog and digital. It replaces two standard paddle antennas at a lower cost with better performance and easier installation. Setup is easier as the 2 coax cables required for diversity receivers are terminated at the same location.

DISTRO4 Antenna Distributor
DISTRO4 is an 4-way active antenna splitter plus cascade port with external power that allows you to share one pair of diversity antennas with up to 5 wireless receivers. Built in a full metal housing it ships with 8 BNC cables and 4 dc power cables to connect up your receivers. Multiple DISTRO4s can be connected together up to 25 receivers to a single diversity pair of antennas.

To utilize directional antennas with more than two receivers, an antenna distributor is the right tool for the job. With a single Diversity Fin and DISTRO4, you can avoid crosstalk bleed from multiple whip antennas, and remove questionable wall warts and unneeded powerstrips that can cause other avoidable issues.

Whether you have a small stage setup with 4 wireless microphones, or a larger venue with 25 wireless microphones, DISTRO4 ensures reliable RF signal to your receivers from the A and B outputs of a single Diversity Fin antenna, removing chances of dropping out from multipath reflections and cross-polarization fades.

DISTRO4 features a 2000 mA internal power supply (no wall wart) and compares to antenna distributors twice its price. It includes all RF and DC power cables needed to connect a 4 channel wireless microphone system as well as cascade to one additional DISTRO4.

Coax Cables
Coaxial cabling can make the difference between flawless RF performance and total system failure. Even the slightest crimp or ding in coaxial cable can cause signals to drop sharply or short out.

RF Venue provides premium made in USA low loss, 50 ohm RG8X coaxial cable with BNC male connectors for wireless audio applications. Our cables are custom run to our specifications: double shielded braid over foil with a perfect balance between loss and flexibility. We terminate in-house and QC on calibrated Keysight network analyzers for guaranteed performance. (2) 25' cables included.

What's Included:
Black Diversity Fin Antenna with padded cover and stand mount bracket
DISTRO4 Antenna Distribution system with (10) BNC jumpers, (4) DC jumpers, and (1) AC power cord
Two 25' RG8X BNC cables

RF Venue DFIN Diversity Fin Antenna for Wireless Microphone System w/ Mount

The Diversity Fin® Antenna is a multi-purpose antenna for wireless microphones that doesn’t drop out by using our patented cross-polarized design. It provides a diversity solution in a single package by combining one log-periodic dipole array (LPDA) and one dipole antenna in an orthogonal (right angle) configuration. One element captures vertically polarized signals, and the other horizontally polarized signals.

Unlike traditional “paddle” or “shark fin” antennas, the Diversity Fin allows receivers to see a constant signal regardless of microphone orientation - allowing the user to hold a wireless microphone in any position relative to the antenna. A single Diversity Fin provides superior coverage to two traditional, shark fin antennas, allowing savings as well as reduced time to installation.

The Diversity Fin requires no external power and works with all wireless brands, analog and digital. It replaces two standard paddle antennas at a lower cost with better performance and easier installation. Setup is faster for live performance since both cable runs required for diversity receivers are terminated at the same location.

Incorporates both directional log-periodic dipole array (LPDA) and bidirectional dipole elements
Captures both horizontal and vertically polarized waves in single unit
Achieves optimal polarization diversity reception
Improves signal consistency in indoor reflective environments
One Diversity Fin replaces two traditional LPDA antennas
Available with a padded cover as well as in matte black models for permanent wall mount installations.

Features:
Frequency Range 470 - 698 MHz
Standard configuration includes Water Resistant Padded Cover
Mounting block accepts 5/8-27, 1/4-20, AND 3/8-16 stands
Custom Logo Printing Available on Cover

What's Included:
Black Diversity Fin Antenna
Padded Cover
Stand mount bracket

RF Venue DISTRO4 4 Channel RF and DC Power Antenna Distributor for Wireless Microphone w/ Cascade

The DISTRO4 is a true “distribution amplifier” that distributes diversity RF and DC power across four wireless microphone receivers of any brand.

DISTRO4 is a 4-way active antenna splitter plus cascade port with external power that allows you to share one pair of diversity antennas with up to 5 wireless receivers. Built in a full metal housing it ships with 10 BNC cables and 4 dc power cables to connect up your receivers. Multiple DISTRO4s can be connected together up to 25 receivers to a single diversity pair of antennas.

To utilize directional antennas with more than two receivers, an antenna distributor is the right tool for the job. With a single Diversity Fin and DISTRO4, you can avoid crosstalk bleed from multiple whip antennas, and remove questionable wall warts and unneeded powerstrips that can cause other avoidable issues.

Whether you have a small stage setup with 4 wireless microphones, or a larger venue with 25 wireless microphones, DISTRO4 ensures reliable RF signal to your receivers from the A and B outputs of a single Diversity Fin antenna, removing chances of dropping out from multipath reflections and cross-polarization fades.

DISTRO4 features a 2000 mA internal power supply (no wall wart) and compares to antenna distributors twice its price. It includes all RF and DC power cables needed to connect a 4 channel wireless microphone system as well as cascade to one additional DISTRO4.

Features:
Internal switching power supply
Coaxial cabling
Power distribution for 4
microphone receiver units

What's Included:
DISTRO4 Antenna Distribution System
(10) BNC jumpers
(4) DC jumpers
(1) AC power cord

RF Venue DFINW Diversity Fin Antenna for Wireless Microphone System

The Diversity Fin® Antenna is a multi-purpose antenna for wireless microphones that doesn’t drop out by using our patented cross-polarized design. It provides a diversity solution in a single package by combining one log-periodic dipole array (LPDA) and one dipole antenna in an orthogonal (right angle) configuration. One element captures vertically polarized signals, and the other horizontally polarized signals.

Unlike traditional “paddle” or “shark fin” antennas, the Diversity Fin allows receivers to see a constant signal regardless of microphone orientation - allowing the user to hold a wireless microphone in any position relative to the antenna. A single Diversity Fin provides superior coverage to two traditional, shark fin antennas, allowing savings as well as reduced time to installation.

The Diversity Fin requires no external power and works with all wireless brands, analog and digital. It replaces two standard paddle antennas at a lower cost with better performance and easier installation. Setup is faster for live performance since both cable runs required for diversity receivers are terminated at the same location.

Improves signal consistency in indoor reflective environments
One Diversity Fin replaces two traditional LPDA paddle antennas
Works with any brand wireless mic system

Incorporates both directional log-periodic dipole array (LPDA) and bidirectional dipole elements
Captures both horizontal and vertically polarized waves in single unit
Achieves optimal polarization diversity reception
Improves signal consistency in indoor reflective environments
One Diversity Fin replaces two traditional LPDA antennas
Available with a padded cover as well as in matte black and matte white models for permanent wall mount installations.

What's Included:
White Diversity Fin Antenna
White wall mount bracket

RF Venue DISTRO9HDR HDR Antenna Signal Distribution for Wireless Microphone System

The DISTRO9 HDR represents a unique approach to high quality RF signal distribution for wireless microphones. The DISTRO9 saves time and rack space by offering 9 outputs and inputs for 2 zones in just one rack space. And each output is clean: DISTRO9 HDR employs low noise figure amplifiers and superior gain structure providing a high dynamic range over the spectrum. The DISTRO9 HDR makes multi zone installations easy by providing two zone antenna inputs, this allows for coverage of large areas or multiple rooms and has DC power available for in-line amplifiers or active antennas.

Features:
DISTRO9 HDR Antenna Distribution
High end RF performance at a competitive price
Designed and Assembled in USA and ETL Listed in the US and Canada
Works with all manufacturers.
Turnkey bundles are available for easy setup

What's Included:
DISTRO9 HDR Antenna Distribution System
(1) AC power cord

RF Venue COMB4CPB 4 Channel IEM Transmitter and CP Beam Antenna for Wireless Microphone System

About the CP Beam Antenna
The CP Beam™ Antenna is a lightweight, circularly polarized beam antenna that doesn’t drop out and is designed to ensure a consistent signal with in-ear monitors (IEMs), wireless microphone systems, and other UHF communication devices.

The CP Beam is easy to set up and transport – fitting in a 3RU rack drawer and weighing just 2.5 lbs – and compresses for easy storage (see the before and after compression). Unlike other bulky helical antennas that require flight cases, the CP Beam is quickly deployed and stowed.

About the COMBINE4
The COMBINE4 active IEM transmitter combiner brings together up to four in-ear monitor transmitter signals into a single, more powerful transmit antenna, eliminating the use of problematic multiple antennas while lowering the buildup of unwanted Intermodulation.

It provides DC power for up to four IEM transmitters to reduce cable clutter and wall warts. Combining transmitters is critical to multi-channel systems, in order to minimize intermodulation artifacts arising from multiple adjacent transmitters interfering with one another. Suitable for use with any brand of transmitter (up to 100mW) and passive antenna.

About RF Venue Coaxial Cables
Coaxial cabling can make the difference between flawless RF performance and total system failure. Even the slightest crimp or ding in coaxial cable can cause signals to drop sharply or short out.

RF Venue provides premium made in USA low loss, 50Ω RG8X coaxial cable with BNC male connectors for wireless audio applications. Our cables are custom made to our specifications: double shielded braid over foil with a perfect balance between loss and flexibility. All cables are terminated in-house and QC on calibrated Agilent network analyzers for guaranteed performance. RF Venue stocks a variety of lengths from 5' to 150'.

Features:
4 channel IEM transmitter combiner
CP Beam antenna
25’ RG8X coaxial cable

What's Included:
(1) CP Beam Antenna
(1) COMBINE4 Active Transmitter Combiner
(1) 25’ RG8X coaxial cable

RF Venue DFIND9 9 Channel Antenna Distribution Bundle for Wireless Microphone System

Diversity Fin Antenna
The Diversity Fin® Antenna is a multi-purpose antenna for wireless microphones that doesn’t drop out by using our patented cross-polarized design. It provides a diversity solution in a single package by combining one log-periodic dipole array (LPDA) and one dipole antenna in an orthogonal (right angle) configuration. One element captures vertically polarized waves, and the other horizontally polarized waves.

Unlike traditional “paddle” or “shark fin” antennas, the Diversity Fin allows receivers to see a constant signal regardless of microphone orientation - allowing the user to hold a wireless microphone in any position relative to the antenna. A single Diversity Fin provides superior coverage to two traditional, shark fin antennas, allowing savings as well as reduced time to installation.

The Diversity Fin requires no external power and works with all wireless brands, analog and digital. It replaces two standard paddle antennas at a lower cost with better performance and easier installation. Setup is faster since the 2 coax cables required for diversity receivers are terminated at the same location.

DISTRO9 HDR
The DISTRO9 HDR represents a unique approach to high quality RF signal distribution for wireless microphones. The DISTRO9 saves time and rack space by offering 9 outputs and inputs for 2 coverage zones in just one rack space. And each output is clean: DISTRO9 HDR employs low noise figure amplifiers and superior gain structure providing a high dynamic range over the spectrum. The DISTRO9 HDR makes multi zone installations easy by providing two zone antenna inputs, this allows for coverage of large areas or multiple rooms and has DC power available for in-line amplifiers or active antennas.
The DISTRO9 HDR is designed and assembled in the USA and uses new and proprietary design that eliminates the old internal splitters used by most antenna distribution systems. These splitters are replaced with state of the art “divide by three” circuitry, providing up to 9 low-noise channels of diversity wireless.

Featuring a robust internal power supply, the DISTRO9 HDR can provide clean DC power to wireless microphone receivers with an optional DC cable kit, and can also be powered directly from a DC battery source for location sound cart applications. The DISTRO9 HDR is also ETL listed to meet bid specification requirements on municipal, government, and other high profile projects.

Coax Cables
Coaxial cabling can make the difference between flawless RF performance and total system failure. Even the slightest crimp or ding in coaxial cable can cause signals to drop sharply or short out.

RF Venue provides premium made in USA low loss, 50 ohm RG8X coaxial cable with BNC male connectors for wireless audio applications. Our cables are custom run to our specifications: double shielded braid over foil with a perfect balance between loss and flexibility. We terminate in-house and QC on calibrated Keysight network analyzers for guaranteed performance. We stock a variety of lengths from 5' to 150'.

What's Included:
Black Diversity Fin Antenna with padded cover and stand mount bracket
DISTRO9 HDR Antenna Distribution system with AC power cord
Two 25' RG8X BNC cables
Ten 1.5' RG8X BNC cables
Ten 2' RG8X BNC cables
One Power Distribution Kit

RF Venue RG8X50 50’ Mini 8X Coaxial Antenna Cable with BNC Male Connectors for Wireless Audio Application

Coaxial cabling can make the difference between flawless RF performance and total system failure. Even the slightest crimp or ding in coaxial cable can cause signals to drop sharply or short out.

RF Venue provides premium made in USA low loss, 50Ω RG8X coaxial cable with BNC male connectors for wireless audio applications. Our cables are custom run to our specifications: double shielded braid over foil with a perfect balance between loss and flexibility. We terminate in-house and QC on calibrated Agilent network analyzers for guaranteed performance.
We stock a variety of lengths from 5' to 150'.

Features:
50' Low-Loss RG8X Coaxial Cable
BNC Connectors

RF Venue COMBINE4 4 Channel IEM Transmitter Antenna Combiner for Wireless Microphone System

The COMBINE4 active IEM transmitter combiner brings together up to four in-ear monitor transmitter signals into a single, more powerful transmit antenna, eliminating the use of problematic multiple antennas while lowering the buildup of unwanted Intermodulation.
It provides DC power for up to four IEM transmitters to reduce cable clutter and wall warts. Combining transmitters is critical to multi-channel systems, in order to minimize intermodulation artifacts arising from multiple adjacent transmitters interfering with one another. Suitable for use with any brand of transmitter (up to 100mW) and passive antenna. The CP Beam Helical antenna is a recommended accessory for the COMBINE4 and is available in a bundled package.

Features:
4 Channel IEM transmitter combiner for
Multi-channel wireless in-ear monitors.
High Quality internal power supply, RF and DC power
Freedom to place one directional antenna outside the rack for better line-of-sight and improved wireless performance.
1RU Full rack width to install near transmitters. Includes cabling accessories to connect and power up to four wireless transmitters.
Compatible with all manufacturers.

RF Venue COMB8CPB 8 Channel IEM Antenna Combiner w/ CP Beam Package for Wireless Microphone System

The effortless way to improve your wireless In-Ear Monitor system is to run it like a pro by using a transmitter combiner driving a helical antenna. Just check any professional stage.

Combining IEMs together on one antenna always works better than using multiple antennas, which can interfere with each other and cause serious RF and audio signal problems. A helical antenna, unlike a whip or paddle antenna, also removes polarization fades, which is the leading cause of signal dropouts.

Introducing the IEM Performer’s Pack from RF Venue. A complete system, engineered to work together to combine up to 8 IEM transmitters of any brand into a single helical antenna. The CP Beam helical antenna also steps up an IEM system’s transmitting power by nearly 8X, focusing the signal directly on your performers and not scattering the signal where it isn’t needed. This allows you to use the lowest possible setting of your transmitter’s output power which greatly reduces intermodulation interference to both your wireless mics and your IEMs. An extra benefit that improves RF signal and audio quality!

About the CP Beam Antenna
The CP Beam™ Antenna is a lightweight, circularly polarized beam antenna that doesn’t drop out and is designed to ensure a consistent signal with in-ear monitors (IEMs), wireless microphone systems, and other UHF communication devices.

The CP Beam is easy to set up and transport – fitting in a 3RU rack drawer and weighing just 2.5 lbs – and compresses for easy storage (see the before and after compression). Unlike other bulky helical antennas that require flight cases, the CP Beam is quickly deployed and stowed.

About the COMBINE8
The all-new COMBINE8 IEM combiner brings together up to eight in-ear monitor transmitter signals into a single rear panel mounted antenna connector.

Any brand IEM set to transmit 50 mW or less may be used, as well as any type of directional antenna. It also provides DC power to up to 8 IEM transmitters with an external power supply, removing the need for wall warts.

IEM transmitter combination is important for multi-channel systems to minimize intermodulation artifacts arising from multiple adjacent transmitters interfering with one another.

About RF Venue Coaxial Cables
Coaxial cabling can make the difference between flawless RF performance and total system failure. Even the slightest crimp or ding in coaxial cable can cause signals to drop sharply or short out.

RF Venue provides premium made in USA low loss, 50Ω RG8X coaxial cable with BNC male connectors for wireless audio applications. Our cables are custom made to our specifications: double shielded braid over foil with a perfect balance between loss and flexibility. All cables are terminated in-house and QC on calibrated Agilent network analyzers for guaranteed performance. RF Venue stocks a variety of lengths from 5' to 150'.

Features:
CP Beam Antenna with stand mount and N-BNC connector
COMBINE8 Antenna Combiner with (8) BNC jumpers, (1) auxiliary DC cable with 8 outputs, (1) AC power cable
25' RG8X BNC cable

What's Included:
CP Beam Antenna with stand mount and N-BNC connector
(1) COMBINE8 Antenna Combiner
(1) RG8X25 Coaxial Cable
(8) BNC jumpers
(1) DC Octopus 8-Connector Power Distribution Cable
(1) AC power cable

RF Venue D-ARCDISTRO4 4 Channel Distribution & Diversity Architectural Antenna for Wireless Microphone System

This turnkey bundle includes everything needed to configure up to 5 channels of wireless microphones.

The new Diversity Architectural Antenna by RF Venue is a high performance antenna system for wireless microphones. Featuring a slim profile enclosure, the Diversity Architectural Antenna can be installed in any position on a wall or ceiling and can be painted to match any interior. Using a unique patent-pending dual-feed antenna design, both A and B diversity connections are provided, so there's no need to install two separately spaced antennas resulting in a more professional look that room designers and architects appreciate.

The Diversity Architectural antenna installs in minutes, with a wall or ceiling-mounted rear plate that is pre-drilled with multiple mounting hole options. The rear plate then simply connects to the front plate, secured with the included mounting screws. Simply connect the two rear-mounted BNC terminated coaxial cables to your in-wall or in-ceiling coaxial cable run and the Diversity Architectural is ready for use.

The Diversity Architectural antenna builds on the highly acclaimed Diversity Fin, eliminating the most common signal dropouts caused by changes in angle and orientation of the RF signal. Ideally suited for conference rooms, multi-purpose meeting spaces, training rooms, and houses of worship, the Diversity Architectural fits into any interior design and delivers professional RF performance in a sleek industrially designed enclosure.

About the DISTRO4
DISTRO4 is a 4-way active antenna splitter plus cascade port with external power that allows you to share one pair of diversity antennas with up to 5 wireless receivers. Built in a full metal housing it ships with 8 BNC cables and 4 dc power cables to connect up your receivers. Multiple DISTRO4s can be connected together up to 25 receivers to a single diversity pair of antennas.
To utilize directional antennas with more than two receivers, an antenna distributor is the right tool for the job. With a single Diversity Fin and DISTRO4, you can avoid crosstalk bleed from multiple whip antennas, and remove questionable wall warts and unneeded powerstrips that can cause other avoidable issues.

About RF Venue Coaxial Cables
Coaxial cabling can make the difference between flawless RF performance and total system failure. Even the slightest crimp or ding in coaxial cable can cause signals to drop sharply or short out.
RF Venue provides premium made in USA low loss, 50Ω RG8X coaxial cable with BNC male connectors for wireless audio applications. Our cables are custom made to our specifications: double shielded braid over foil with a perfect balance between loss and flexibility. All cables are terminated in-house and QC on calibrated Agilent network analyzers for guaranteed performance. RF Venue stocks a variety of lengths from 5' to 150'.

What's Included:
Diversity Architectural Antenna
DISTRO4 Antenna Distribution system with (10) BNC jumpers, (4) DC jumpers, and (1) AC power cord
Two White 25' RG8X BNC cables

RF Venue COMBINE8 8 Channel In Ear Monitor Transmitter Combiner for Wireless Microphone System

The COMBINE8 IEM combiner brings together up to eight in-ear monitor transmitter signals into a single rear panel mounted antenna connector.

Any brand IEM set to transmit 50 mW or less may be used, as well as any type of directional antenna. It also provides DC power to up to 8 IEM transmitters with an external power supply, removing the need for wall warts.

IEM transmitter combination is important for multi-channel systems to minimize intermodulation artifacts arising from multiple adjacent transmitters interfering with one another. The CP Beam antenna is a recommended accessory for the COMBINE8 and is available with in a bundled package.

Features:
Eight (8) Channel In-Ear Monitor Combiner
1RU Full rack width to install near transmitters.
Includes cabling accessories to connect and power up to eight wireless transmitters.
Compatible with all manufacturers.
Freedom to place one directional antenna outside the rack for better line-of-sight and improved wireless performance.

What's Included:
COMBINE8 Antenna Combiner
(8) BNC jumpers
(1) Auxiliary AC power cable with 8 outputs
(1) AC power cord
(1) DC Octopus 8-Connector Power Distribution Cable

RF Venue 4ZONE Antenna Combiner for Wireless Microphone System

The 4 ZONE active antenna combiner takes the complexity and expense out of multi-zone wireless microphone projects. The 4 ZONE combines up to four separate pairs of diversity antenna connections for multi-purpose rooms, indoor-outdoor configurations, or main stages with secondary breakout rooms.

For fine tuning RF levels in each coverage area, 4 ZONE provides individual channel RF signal attenuation control down to -31dB in 1 dB steps. And for active antennas or in-line amplifiers, it features selectable 12V DC power over coax.

With selectable ON/OFF inputs, 4 ZONE also allows for quick control of coverage zones for roaming microphone transmitters, simply choose which zones are active as a live event or location sound project progresses, saving setup and breakdown time onsite.

Features:
4 Zone antenna combiner
A unique one rack space design allows microphones to operate in up to four separate coverage areas.
Seamlessly cover wireless microphones between building locations or indoor and outdoor areas.
User configurable to allow which zones are active.

What's Included:
4 Zone Antenna Combiner
(2) BNC jumpers
(1) AC power cord

RF Venue RG8X100 Coaxial Antenna Cable with BNC Male Connectors for Wireless Audio Application

Premium low-loss RG8X coaxial cable with BNC (male) connectors. Double-shielded (braid over foil) design. 100' (30.5 m).
Coaxial cabling can make the difference between flawless RF performance and total system failure. Even the slightest crimp or ding in coaxial cable can cause signals to drop sharply or short out.

RF Venue provides premium made in USA low loss, 50Ω RG8X coaxial cable with BNC male connectors for wireless audio applications. Our cables are custom run to our specifications: double shielded braid over foil with a perfect balance between loss and flexibility. We terminate in-house and QC on calibrated Agilent network analyzers for guaranteed performance.

Features:

100' RG8

Low-loss RG8X coaxial cable with BNC (male) connectors

RF Venue DFINWDISTRO4 4 Channel Distributor and Antenna Package for Wireless Microphone System

Diversity Fin Antenna
The Diversity Fin® Antenna is a multi-purpose antenna for wireless microphones that doesn’t drop out by using our patented cross-polarized design. It provides a diversity solution in a single package by combining one log-periodic dipole array (LPDA) and one dipole antenna in an orthogonal (right angle) configuration. One element captures vertically polarized waves, and the other horizontally polarized waves.

Unlike traditional “paddle” or “shark fin” antennas, the Diversity Fin allows receivers to see a constant signal regardless of microphone orientation - allowing the user to hold a wireless microphone in any position relative to the antenna without signal loss. A single Diversity Fin provides superior coverage to two traditional, shark fin antennas, allowing savings as well as reduced time to installation.

The Diversity Fin requires no external power and works with all wireless brands, analog and digital. It replaces two standard paddle antennas at a lower cost with better performance and easier installation. Setup is easier as the 2 coax cables required for diversity receivers are terminated at the same location.

DISTRO4 Antenna Distributor
DISTRO4 is an 4-way active antenna splitter plus cascade port with external power that allows you to share one pair of diversity antennas with up to 5 wireless receivers. Built in a full metal housing it ships with 8 BNC cables and 4 dc power cables to connect up your receivers. Multiple DISTRO4s can be connected together up to 25 receivers to a single diversity pair of antennas.

To utilize directional antennas with more than two receivers, an antenna distributor is the right tool for the job. With a single Diversity Fin and DISTRO4, you can avoid crosstalk bleed from multiple whip antennas, and remove questionable wall warts and unneeded powerstrips that can cause other avoidable issues.

Whether you have a small stage setup with 4 wireless microphones, or a larger venue with 25 wireless microphones, DISTRO4 ensures reliable RF signal to your receivers from the A and B outputs of a single Diversity Fin antenna, removing chances of dropping out from multipath reflections and cross-polarization fades.

DISTRO4 features a 2000 mA internal power supply (no wall wart) and compares to antenna distributors twice its price. It includes all RF and DC power cables needed to connect a 4 channel wireless microphone system as well as cascade to one additional DISTRO4.

Coax Cables
Coaxial cabling can make the difference between flawless RF performance and total system failure. Even the slightest crimp or ding in coaxial cable can cause signals to drop sharply or short out.

RF Venue provides premium made in USA low loss, 50 ohm RG8X coaxial cable with BNC male connectors for wireless audio applications. Our cables are custom run to our specifications: double shielded braid over foil with a perfect balance between loss and flexibility. We terminate in-house and QC on calibrated Keysight network analyzers for guaranteed performance. (2) 25' cables included.

Features:
4 Channel antenna distributor, Diversity Fin
White Install, (2) 25 ft. RG8X coaxial cables

What's Included:
White Diversity Fin Antenna with white stand mount bracket
DISTRO4 Antenna Distribution system with (10) BNC jumpers, (4) DC jumpers, and (1) AC power cord
Two White 25' RG8X BNC cables

RF Venue CPB CP Beam Lightweight High Gain Portable Helical Antenna

The CP Beam™ Antenna is a lightweight, circularly polarized antenna that doesn’t drop out and is designed to ensure a consistent signal with in-ear monitors (IEMs), wireless microphone systems, and other UHF communication devices.

The CP Beam is easy to set up and transport – fitting in a 3RU rack drawer and weighing just 2.5 lbs – and compresses for easy storage (see the before and after compression). Unlike other bulky helical antennas that require flight cases, the CP Beam is quickly deployed and stowed.

Features:
Frequency Range 470 - 698 MHz, + 950 MHz
9 dBd Gain, 63° Beamwidth
Standard Configuration Includes Water Resistant Cover
N-Type Connector with N to BNC Adapter Provided
Mounting Block Accepts 5/8-27, 1/4-20, AND 3/8-16 Stands
Folds from 12" Extended to 3" collapsed, 14" L x 14" W
Custom Colors and Logo Printing Available
Provides constant signal regardless of IEM receiver position
Can collapse to fit in a rack drawer for transport
Not buried in a rack – better signal with line of sight to IEMs
Focused beam signal – for better reception compared to omnidirectional

Specifications:
Operating frequency: 468-740 MHz, + 950 MHz
Bandwidth: 272 MHz
Impedance: 50
Pattern type: Beam
Azimuth X Beam width: 63°
Azimuth Y Beam width: 70°
Squint: < 2
Gain: 9 dBd
Transmit Power (max.): 50 W
Connector: N female (BNC adapter supplied)

RF Venue DC-OCTOPUS 8 Connector DC Power Distribution Cable for DISTRO9 HDR

DC Octopus 8-Connector Power Distribution Cable, with Anderson PowerPole Connector. For use with the DISTRO9 HDR.

Features:
8-Connector
DC Power Distribution Cable

RF Venue DFINBD9 DISTRO9 HDR 9 Channel Diversity Antenna Distribution for Wireless Microphone

Diversity Fin Antenna
The Diversity Fin® Antenna is a multi-purpose antenna for wireless microphones that doesn’t drop out by using our patented cross-polarized design. It provides a diversity solution in a single package by combining one log-periodic dipole array (LPDA) and one dipole antenna in an orthogonal (right angle) configuration. One element captures vertically polarized waves, and the other horizontally polarized waves.

Unlike traditional “paddle” or “shark fin” antennas, the Diversity Fin allows receivers to see a constant signal regardless of microphone orientation - allowing the user to hold a wireless microphone in any position relative to the antenna. A single Diversity Fin provides superior coverage to two traditional, shark fin antennas, allowing savings as well as reduced time to installation.

The Diversity Fin requires no external power and works with all wireless brands, analog and digital. It replaces two standard paddle antennas at a lower cost with better performance and easier installation. Setup is faster since the 2 coax cables required for diversity receivers are terminated at the same location.

DISTRO9 HDR
The DISTRO9 HDR represents a unique approach to high quality RF signal distribution for wireless microphones. The DISTRO9 saves time and rack space by offering 9 outputs and inputs for 2 coverage zones in just one rack space. And each output is clean: DISTRO9 HDR employs low noise figure amplifiers and superior gain structure providing a high dynamic range over the spectrum. The DISTRO9 HDR makes multi zone installations easy by providing two zone antenna inputs, this allows for coverage of large areas or multiple rooms and has DC power available for in-line amplifiers or active antennas.

The DISTRO9 HDR is designed and assembled in the USA and uses new and proprietary design that eliminates the old internal splitters used by most antenna distribution systems. These splitters are replaced with state of the art “divide by three” circuitry, providing up to 9 low-noise channels of diversity wireless.

Featuring a robust internal power supply, the DISTRO9 HDR can provide clean DC power to wireless microphone receivers with an optional DC cable kit, and can also be powered directly from a DC battery source for location sound cart applications. The DISTRO9 HDR is also ETL listed to meet bid specification requirements on municipal, government, and other high profile projects.

Coax Cables
Coaxial cabling can make the difference between flawless RF performance and total system failure. Even the slightest crimp or ding in coaxial cable can cause signals to drop sharply or short out.

RF Venue provides premium made in USA low loss, 50 ohm RG8X coaxial cable with BNC male connectors for wireless audio applications. Our cables are custom run to our specifications: double shielded braid over foil with a perfect balance between loss and flexibility. We terminate in-house and QC on calibrated Keysight network analyzers for guaranteed performance. We stock a variety of lengths from 5' to 150'.

Features:
Antenna Distribution for Wireless Microphone
Diversity Fin Antenna/Wall Mount Bracket
DISTRO9 HDR Antenna Distributor
DC Power Cable Kit, Coaxial Cables

What's Included:
Black Diversity Fin Antenna with black wall mount bracket
DISTRO9 HDR Antenna Distribution system with AC power cord
Two 25' RG8X BNC cables
Ten 1.5' RG8X BNC cables
Ten 2' RG8X BNC cables
One Power Distribution Kit

RF Venue D-ARCD9 Diversity Antenna & DISTRO9 HDR 9 Channel Distribution for Wireless Microphone System

This turnkey bundle includes everything needed to configure up to 9 channels of wireless microphones

About the Diversity Architectural Antenna
The new Diversity Architectural Antenna by RF Venue is a high performance antenna system for wireless microphones. Featuring a slim profile enclosure, the Diversity Architectural Antenna can be installed in any position on a wall or ceiling and can be painted to match any interior. Using a unique patent-pending dual-feed antenna design, both A and B diversity connections are provided, so there's no need to install two separately spaced antennas resulting in a more professional look that room designers and architects appreciate.

The Diversity Architectural antenna installs in minutes, with a wall or ceiling-mounted rear plate that is pre-drilled with multiple mounting hole options. The rear plate then simply connects to the front plate, secured with the included mounting screws. Simply connect the two rear-mounted BNC terminated coaxial cables to your in-wall or in-ceiling coaxial cable run and the Diversity Architectural is ready for use.

The Diversity Architectural antenna builds on the highly acclaimed Diversity Fin, eliminating the most common signal dropouts caused by changes in angle and orientation of the RF signal. Ideally suited for conference rooms, multi-purpose meeting spaces, training rooms, and houses of worship, the Diversity Architectural fits into any interior design and delivers professional RF performance in a sleek industrially designed enclosure.

About the DISTRO9 HDR
The DISTRO9 HDR represents a unique approach to high quality RF signal distribution for wireless microphones. The DISTRO9 saves time and rack space by offering 9 outputs and inputs for 2 zones in just one rack space. And each output is clean: DISTRO9 HDR employs low noise figure amplifiers and superior gain structure providing a high dynamic range over the spectrum. The DISTRO9 HDR makes multi zone installations easy by providing two zone antenna inputs, this allows for coverage of large areas or multiple rooms and has DC power available for in-line amplifiers or active antennas. It also provides DC power for up to 8 wireless microphone receivers with the included DC-OCTOPUS power cable. This eliminates the need for wall wart external power supplies and can save rack space.

About RF Venue Coaxial Cables
Coaxial cabling can make the difference between flawless RF performance and total system failure. Even the slightest crimp or ding in coaxial cable can cause signals to drop sharply or short out.
RF Venue provides premium made in USA low loss, 50Ω RG8X coaxial cable with BNC male connectors for wireless audio applications. Our cables are custom made to our specifications: double shielded braid over foil with a perfect balance between loss and flexibility. All cables are terminated in-house and QC on calibrated Agilent network analyzers for guaranteed performance. RF Venue stocks a variety of lengths from 5' to 150'.

Features:
Antenna Distribution for Wireless Microphone
Diversity Architectural Antenna
DISTRO9 HDR Antenna Distributor

What's Included:
Diversity Architectural Antenna
DISTRO9 HDR Antenna Distribution system with AC power cord
Two White 25' RG8X BNC cables
Ten 1.5' RG8X BNC cables
Ten 2' RG8X BNC cables
One Power Distribution Kit

RF Venue D-OMNI Diversity Omni Antenna for UHF Wireless Microphone System

Building on the success of the highly acclaimed Diversity Fin® Antenna, the Diversity Omni Antenna is an all-new antenna system designed for omnidirectional coverage of wireless microphones. The Diversity Omni features two antennas on a single stand, capturing both vertically and horizontally polarized signals and eliminates the most common signal dropouts in a compact size.

The Diversity Omni also offers greater flexibility in antenna placement, since only one is needed in place of two separate antennas. Its weather resistant design allows it to be mounted outdoors by installing simple protection for the connectors and the provided cordura nylon cover.

The Diversity Omni Antenna is perfectly suited for indoor multi-zone projects or outdoors where large areas of coverage are needed, such as sports venues, theme parks, and amphitheaters.

To connect the Diversity Omni Antenna to a wireless microphone system, simply connect both the A and B antenna inputs from an antenna distribution system like the RF Venue DISTRO4 or DISTRO9 HDR and position the antenna where coverage is desired.

Unlike traditional omnidirectional antennas, the Diversity Omni Antenna allows receivers to see a constant signal regardless of microphone orientation - allowing the presenter to hold a wireless microphone in any position relative to the antenna. A single Diversity Omni provides superior coverage to two traditional omni antennas, allowing cost savings as well as reduced time to installation.

What's Included:
Diversity Omni Antenna
Stand mount
Weather resistant cover

RF Venue RG8X15 15' Low Loss Coaxial Antenna Cable BNC Male Connectors for Wireless Audio Application

15' RG8X Low-Loss Coaxial Antenna Cable from RF Venue is a 50-ohm cable that features BNC connectors and offers a cost effective, reliable interconnect. The cable is constructed with a double-shielded braid over foil to provide the right balance between loss and flexibility.

Features:
15' RG8X Low-Loss Antenna Cable
50-Ohm Cable
BNC Connectors

RF Venue FM-ANT-KIT FM Antenna Kit with Stand and Cable Turnkey Package for Churches and Live Venues

The RF Venue FM Antenna Kit is a turnkey package for churches and live venues transitioning to "drive-in" style services and performances. Typical low power FM broadcasts suffer from signal dropouts and uneven coverage. With the FM Antenna Kit from RF Venue, these systems can dramatically improve signal quality for attendees listening to a live service or music performance in their cars. The FM Antenna Kit allows extension into the parking lot area to maintain best quality signal for car FM tuners.

Using an orthogonal ground plan with very low SWR over the FM band, the FM Antenna is rated for up to 100W of continuous operation and is easy to deploy. The low wind load antenna element and ground plane are perfectly suited for outdoor locations, and the kit includes a sandbag that clips to the base to keep the system in place. The antenna is weather resistant but not for permanent outdoor installations.

Features:
High performance FM antenna
Adjustable radials
Telescoping antenna stand
Sandbag with clip
Antenna extension for tuning
100' RG8X low loss coaxial cable
Radiation pattern: omnidirectional
Polarization: vertical
Impedance: 50-75 Ohms
Frequency Range: 88-108 MHz
Typical VSWR: 1.5:1 (tunable)

RFvenue CP-ARC Architectural Antenna for Wireless In Ear Monitor Systems

The CP Architectural Antenna by RF Venue is a high performance antenna for installed in-ear monitor systems (IEMs). Featuring a slim profile enclosure, the CP Architectural Antenna can be installed on a wall or ceiling and can be painted to match any interior. Unlike LPDA or "paddle" antennas with a fixed polarization, the CP Architectural Antenna uses a unique circularly polarized design to provide excellent transmit signal coverage for IEMs with a highly polished and professional look that room designers and architects appreciate.

The CP Architectural antenna installs in minutes, with a wall or ceiling-mounted rear plate that is pre-drilled with multiple mounting hole options. The rear plate then simply connects to the front plate, secured with the included mounting screws. Simply connect the rear-mounted BNC terminated coaxial cable to your in-wall or in-ceiling coaxial cable run and the CP Architectural is ready for use.
The CP Architectural antenna builds on the highly acclaimed foldable CP helical antenna, eliminating the most common signal dropouts while reducing noise and interference. Ideally suited for houses of worship and other installed IEM venues, the CP Architectural Antenna fits any interior design and delivers professional RF performance in the same sleek industrially designed enclosure as the popular Diversity Architectural Antenna for wireless microphones.

Features:
Blends into any background
Doesn't Drop Out
Designed specifically for IEMs
Circularly polarized performance in a sleek package