Sound Tube

SoundTube RS600I-WH 6.5" Open Ceiling Hanging Pendant Speaker with Broad Beam

The RS600i has a 6.5-inch polypropylene woofer and one 1.0 inch convex titanium tweeter with Ferrofluid cooling mounted to a proprietary cast-aluminum baffle and heat sink. The two-way ported speaker with an open-ceiling enclosure design delivers effective low-end response (58 Hz) and 100° off-axis performance (2 to 10 kHz, independently verified). The RS600i uses patented ZeroReflection™ enclosure technology for optimal sound reproduction and cabinet rigidity. SoundTube®'s proprietary BroadBeam® waveguide tweeter system delivers consistent high-performance audio across the operating bandwidth. The RS600i speaker design incorporates a low-profile grille, proprietary motor-board and a six-position selectable tap switch for 25-, 70.7- and 100-volt applications with transformer bypass positions. Hanging hardware is included and features a SpeedClamp™ self-locking cable grip for fast, easy and secure installation. Euroblock connector and terminal weather boot are included.

Features:

• Patented BroadBeam® waveguide technology delivers a consistent dispersion pattern for maximum intelligibility and edge-to-edge coverage (up to 10 kHz, independently verified).

• One 6.5 inch (165 mm) polypropylene woofer and one 1.0 inch (25.4 mm) convex titanium tweeter with FerroFluid cooling mounted to a proprietary castaluminum baffle and heat sink.

• Weatherized components for indoor and outdoor applications.

• Includes UL-listed hanging hardware with galvanized steel cables and integrated SpeedClamp™ self-locking cable grip for fast, easy and secure installation. Also includes Euroblock connector and terminal weather boot.

• Patented ZeroReflection™ enclosure technology for optimal sound reproduction and cabinet rigidity.

• Easy access six-position selectable tap switch for 25-, 70.7- and 100-volt applications with transformer bypass position simplifies ordering and inventory tracking.

• Steel grille with protective powdercoated finish for lasting durability.

• Average sensitivity of 88.5 dB offers high-output capabilities and reduced amplification costs.

• UL 1480 (UEAY), 2239 (hanging cable) and Mil-Spec 810 approved.

• High-quality black or white paint finish. Custom paint colors optional.

• Optional accessory: AC-RS-SM6 bracket for surface-mount applications.

Specifications:

Color: White

UPC: 752830443488

Manufacturer: SoundTube

Manufacturer's Category: RSi Original Pendant

Height: 14.31 in / 363.5 mm

Width/Diameter: 12.1 in / 307.3 mm

Shipping Weight: 17.7 lbs / 8.02 kg

Carton Height: 16.5 in / 419.1 mm

Carton Length: 15 in / 381 mm

Carton Width: 15 in / 381 mm

Certifications: CE, MIL Spec, RoHS, UL1480A, UL2239

Enclosure Properties: ABS Glass Fiber Reinforced, Injection Molded, Ported

Enclosure Volume: 686.7 cu in / 11253 cu cm

Included Accessories: Euroblock, Hanging Hardware, Safety Cable, Terminal Weather Boot

Optional Accessories: White Grille (GRL-RS600-WH)|10' Hanging Cable (AC-RS-HH-10)|20' Hanging Cable (AC-RS-HH-20)|50' Hanging Cable (AC-RS-HH-50)|White Mounting Bracket (AC-RS-SM6-WH)|Connector (EUROBLOCK)|White Weatherboot (WEATHERBOOT-L-WH)|Beam Clamp (AC-BC1)|Forged Eye Bolt (AC-FE1)|White Split Loom Tubing (AC-SLT-10-WH)|Snap Link (AC-SL1)

Source Inputs: 4 Pin 5.08mm Euroblock

TAA Compliant (Trade America): No

BAA Compliant (Made in USA): No

Coverage Angle (±6dB @ 2kHz): 100°

Crossover Frequency: 3.0 kHz

Directivity Factor (Q) (Averaged 100Hz - 10kHz, @ 2kHz): 4.7 and 7.9

Directivity Index (DI) dB (Averaged 100Hz - 10kHz, @ 2kHz): 5.7dB and 9.0dB

Frequency Response (± 10 dB): 58 Hz - 22 kHz

Frequency Response (± 3 dB): 85 Hz - 17 kHz

Grille Properties: Powder-Coated, Steel

Low Frequency Voice Coil: 1 in / 25.4 mm

Low Pass Crossover: 12 dB per octave 2nd order

Max. Continuous Power RMS: 90W

Max. Program Power: 180 W

Minimum Impedance (Ω Ohms): 4.8 Ω

Network Type: High Pass: 12 dB per octave 2nd order

Nominal Impedance (Ω Ohms): 8 Ω

Tweeter Driver: 1" Convex Aluminum w/ BroadBeam® Waveguide

Woofer Driver: 6.5" Polypropylene Cone w/ Butyl Rubber Surround

Sensitivity: dB @ 1W/1M 88.5 dB

Sensitivity: dB @ 2.83V/1M 88.5 dB

Tap Selector: Rotary Switch

Transformer Options: 25 / 70.7 / 100 V, 8 Ohm direct

Transformer Taps Max. Setting (25V/70.7V/100V): 5W/33W/33W

SoundTube IPD-RS62-EZ-BK 6.5" Open Ceiling Hanging Pendant Speaker w/ BroadBeam

SoundTube IPD-RS62-EZ Dante®-enabled coaxial pendant speaker incorporates one 6.5 inch (165 mm) coaxial driver with BroadBeam Ring™ technology for consistently smooth high frequency. Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. Includes hanging hardware with galvanized steel cables and hanging bracket for fast, easy and secure installation. Unit may be hung or mounted direct-to-conduit via locking cover plate. The enclosure is constructed of injection molded ABS with glass fiber reinforcement for lasting durability in indoor or outdoor applications. Includes an aluminum grille with protective powder coated finish. Hanging hardware, weather plug, cover plate, and AC-RSEZ-HH-10 are included.

Note: SoundTube IPD speakers are NOT compatible with PoE++. 30W PoE maximum (or 40W maximum with STNet Switch II)

Features:

• IP addressable, self powered (PoE) speaker

• Dante I/O for interconnectivity with Dante-enabled audio systems

• One 6.5" (165mm) coaxial driver with BroadBeam Ring technology for high frequency dispersion and one 25mm (1") silk dome tweeter

• Fast connection of power, audio and control functions via one CAT5 or CAT6 cable

• 40W PoE provided by SoundTube STNet-Switch; also works with standard PoE plus and PoE switches

• Provides report-back on any problems via SoundTube software

• Weatherized components for indoor and outdoor applications

• Includes hanging hardware with galvanized steel cables and hanging bracket for fast, easy and secure installation. Unit may be hung or mounted direct-to-conduit via locking cover plate

• Enclosure constructed of injection molded ABS with glass fiber reinforcement for lasting durability in indoor or outdoor applications

• Aluminum grille with protective powdercoated finish

• Unit ships in eco-friendly, recyclable packaging

• High-quality black paint finish. Speaker is paintable

Specifications:

Color: Black

UPC: 748252177186

Manufacturer: SoundTube

Manufacturer's Category: STNet IP-Addressable and Dante Series

Height: 10.4 in / 264.2 mm

Width/Diameter: 10.08 in / 256 mm

Shipping Weight: 8.9 lbs / 4.04 kg

Carton Height: 13.5 in / 342.9 mm

Carton Length: 12.25 in / 311.15 mm

Carton Width: 12 in / 304.8 mm

Certifications: CE, RoHS, UL60065, FCC

Enclosure Properties: ABS Glass Fiber Reinforced

Included Accessories: Cover Plate, Hanging Hardware, Weather Plug

Optional Accessories: Black Grille (GRL-RS62-EZ-BK)|10' Hanging Cable (AC-RS-HH-10) | 20' Hanging Cable (AC-RS-HH-20) | 50' Hanging Cable (AC-RS-HH-50) | Black Mounting Bracket (AC-RS-SM5-BK) | Beam Clamp (AC-BC1) | Forged Eye Bolt (AC-FE1) | Black Split Loom Tubing (AC-SLT-10-BK) | Snap Link (AC-SL1)

Source Inputs: RJ45 Ethernet Port

TAA Compliant (Trade America): No

BAA Compliant (Made in USA): No

Coverage Angle (±6dB @ 2kHz): 105°

Crossover Frequency: 3.0 kHz

Directivity Factor (Q) (Averaged 100Hz - 10kHz, @ 2kHz): 3.6 and 7.1

Directivity Index (DI) dB (Averaged 100Hz - 10kHz, @ 2kHz): 5.5 dB and 8.5 dB

Frequency Response (± 10 dB): 80 Hz - 22 kHz

Frequency Response (± 3 dB): 100 Hz - 20 kHz

Grille Properties: Aluminum, Powder-Coated

Low Frequency Voice Coil: 1 in / 25.4 mm

Low Pass Crossover: 12 dB per octave 2nd order

Max SPL @ 1M: 104 dB

Max. Program Power: 64 W

Network Type: High Pass: 6 dB per octave 1st order

Tweeter Driver: 1" Silk Dome w/ BroadBeam Ring®

Woofer Driver: 6.5" Polypropylene Cone w/ Butyl Rubber Surround

Tap Selector: Rotary Switch

SoundTube IPD-RS62-EZ-WH 6.5" Open Ceiling Hanging Pendant Speaker w/ BroadBeam

SoundTube IPD-RS62-EZ Dante®-enabled coaxial pendant speaker incorporates one 6.5 inch (165 mm) coaxial driver with BroadBeam Ring™ technology for consistently smooth high frequency. Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. Includes hanging hardware with galvanized steel cables and hanging bracket for fast, easy and secure installation. Unit may be hung or mounted direct-to-conduit via locking cover plate. The enclosure is constructed of injection molded ABS with glass fiber reinforcement for lasting durability in indoor or outdoor applications. Includes an aluminum grille with protective powder coated finish. Hanging hardware, weather plug, cover plate, and AC-RSEZ-HH-10 are included.

Note: SoundTube IPD speakers are NOT compatible with PoE++. 30W PoE maximum (or 40W maximum with STNet Switch II)

Features:

• IP addressable, self powered (PoE) speaker

• Dante I/O for interconnectivity with Dante-enabled audio systems

• One 6.5" (165mm) coaxial driver with BroadBeam Ring technology for high frequency dispersion and one 25mm (1") silk dome tweeter

• Fast connection of power, audio and control functions via one CAT5 or CAT6 cable

• 40W PoE provided by SoundTube STNet-Switch; also works with standard PoE plus and PoE switches

• Provides report-back on any problems via SoundTube software

• Weatherized components for indoor and outdoor applications

• Includes hanging hardware with galvanized steel cables and hanging bracket for fast, easy and secure installation. Unit may be hung or mounted direct-to-conduit via locking cover plate

• Enclosure constructed of injection molded ABS with glass fiber reinforcement for lasting durability in indoor or outdoor applications

• Aluminum grille with protective powdercoated finish

• Unit ships in eco-friendly, recyclable packaging

• High-quality white paint finish. Speaker is paintable

Specifications:

Color: white

UPC: 748252177179

Manufacturer: SoundTube

Manufacturer's Category: STNet IP-Addressable and Dante Series

Height: 10.4 in / 264.2 mm

Width/Diameter: 10.08 in / 256 mm

Shipping Weight: 8.9 lbs / 4.04 kg

Carton Height: 13.5 in / 342.9 mm

Carton Length: 12.25 in / 311.15 mm

Carton Width: 12 in / 304.8 mm

Certifications: CE, RoHS, UL60065, FCC

Enclosure Properties: ABS Glass Fiber Reinforced

Included Accessories: Cover Plate, Hanging Hardware, Weather Plug

Optional Accessories: White Grille (GRL-RS62-EZ-WH) | 10' Hanging Cable (AC-RS-HH-10) | 20' Hanging Cable (AC-RS-HH-20) | 50' Hanging Cable (AC-RS-HH-50) | White Mounting Bracket (AC-RS-SM5-WH)|Beam Clamp (AC-BC1) | Forged Eye Bolt (AC-FE1) | White Split Loom Tubing (AC-SLT-10-WH) | Snap Link (AC-SL1)

Source Inputs: RJ45 Ethernet Port

TAA Compliant (Trade America): No

BAA Compliant (Made in USA): No

Coverage Angle (±6dB @ 2kHz): 105°

Crossover Frequency: 3.0 kHz

Directivity Factor (Q) (Averaged 100Hz - 10kHz, @ 2kHz): 3.6 and 7.1

Directivity Index (DI) dB (Averaged 100Hz - 10kHz, @ 2kHz): 5.5 dB and 8.5 dB

Frequency Response (± 10 dB): 80 Hz - 22 kHz

Frequency Response (± 3 dB): 100 Hz - 20 kHz

Grille Properties: Aluminum, Powder-Coated

Low Frequency Voice Coil: 1 in / 25.4 mm

Low Pass Crossover: 12 dB per octave 2nd order

Max SPL @ 1M: 104 dB

Max. Program Power: 64 W

Network Type: High Pass: 6 dB per octave 1st order

Tweeter Driver: 1" Silk Dome w/ BroadBeam Ring®

Woofer Driver: 6.5" Polypropylene Cone w/ Butyl Rubber Surround

Tap Selector: Rotary Switch

SoundTube IPD-HUB 2 2 Channel DSP Amplifier with Power Options PoE & IP Based 

Provides PoE and IP-based audio solutions for use in multi-zone applications utilizing passive speakers. The IPD-Hub 2 amplifier features local and Dante inputs providing unprecedented network control for commercial audio in numerous applications without the need for a traditional DSP.

The IPD-Hub 2 DSP amplifier gives designers and installers an IP-based alternative to traditional 70V/100V distributed audio systems in small to midsize applications. The IPD-Hub 2 utilizes a Dante infrastructure for flexible audio distribution. The amp is complete with local and Dante inputs and local and network control to address requirements for commercial audio connectivity in numerous scalable systems such as retail, bar, restaurants, hospitality, spas, education facilities, and more.

Output power with 40 W PoE is 12 W per channel.

Included accessory: AC-HUB2-CBL-RDL RDL Adapter Cable

Specifications:

Color: Black

UPC: 644216223404

Manufacturer: SoundTube

Manufacturer's Category: STNet IP-Addressable and Dante Series

Depth: 6 in / 152.4 mm

Height: 1.75 in / 44.45 mm

Width/Diameter: 8 in / 203.2 mm

Shipping Weight: 7.71 lbs / 3.5 kg

Certifications: CE, UL60065, ETL-C/US

TAA Compliant (Trade America): No

BAA Compliant (Made in USA): No

Input Type: 2 x RJ45, 1 Dante, 1 Axiom

Input Power: PoE, PoE+, 40W PoE, 24V DC Power Supply

Output Type: 2 Channel Phoenix

Output Power: 12W per Channel @ 40W PoE

Speaker Output: (2) x 8 Ω or (4) x 16 Ω speakers

SoundTube MM43-BGM-WH Mighty Mite 4" 3 Way Hanging Pendant Speaker Woofer

The MM43-BGM is a 3-way pendant speaker with a 5.25” dual-chamber, band-pass subwoofer, a 4” woofer and a .75” BroadBeam® ring tweeter, with high-frequency dispersion technology for wide off-axis coverage. Mighty Mite’s subwoofer with phase-aligned bass produces even, full-range coverage, smooth response, and loud, clean sound from one point of origin. With its built-in subwoofer and expansive coverage over larger areas than conventional pendant speakers, the Mighty Mite generates exceptional sound for music and voice applications. In addition, the speaker’s wide coverage capabilities mean fewer speakers are needed thus further reducing both hardware and labor costs for the project.

Ideal for paging, background music, foreground music and most open-ceiling applications, the Mighty Mites have a built-in 30-Watt transformer for standard 25/70/100-volt applications or can be used as direct 8-ohm speakers. The unique driver combination gives unprecedented phase-matched audio between the low, mid, and high frequencies.

Mighty Mite has an integrated hanging bracket at the top of the speaker and comes with UL-listed hanging hardware with cables and integrated SpeedClamp™ self-locking wire grip for fast, easy, and secure installation. The MM43-BGM is 22” high with a 7.4” diameter, weigh 14 lbs.

Features:

• 3 Way Pendant speaker
  

• 7.4" Wide, 22" High Speaker
  

• Phase Aligned Bass
  

• Integrated Hanging Bracket

Specifications:
Color: White
UPC: 644216228508
Manufacturer: SoundTube
Manufacturer's Category: MM/DS Contemporary Pendants
Height: 21.9 in / 556 mm
Width/Diameter: 7.4 in / 188 mm
Shipping Weight: 13.15 lbs. / 5.96 kg
Certifications: CE, RoHS, UL1480, UL2239
Enclosure Properties: ABS
Included Accessories: Hanging Hardware, Terminal Weather Boot
Source Inputs: 4 Pin Ceramic Terminal
TAA Compliant (Trade America): No
BAA Compliant (Made in USA): No
Crossover Frequency: 100 Hz; 2.5 kHz
Frequency Response (± 10 dB): 37 Hz - 27 kHz
Frequency Response (± 3 dB): 62 Hz - 24 kHz
Grille Properties: Magnetic, Powder-Coated
Max. Continuous Power RMS: 30 W
Max SPL @ 1M: 103 dB
Max. Program Power: 60 W
Nominal Impedance (Ω Ohms): 8 Ω
Tweeter Driver: .75" Synthetic Soft Dome
Woofer Driver: 4" Polypropylene Cone with Butyl Rubber Surround
Subwoofer Driver: 5.25" Polypropylene Cone w/ Rubber Surround
Sensitivity dB @ 1W/1M: 84 dB
Sensitivity dB @ 2.83V/1M: 84 dB
Tap Selector: Rotary Switch
Transformer Options: Included 70.7 / 100 V transformer (30 W maximum)

SoundTube RS800I-BK Two Way 8" Hanging Pendant Speaker Subwoofer w/ BroadBeam

The RS800i includes an 8-inch polypropylene woofer and one 1.0 inch convex titanium tweeter with FerroFluid cooling mounted to a proprietary cast-aluminum baffle and heat sink. The two-way, ported speaker with an open-ceiling enclosure design delivers extended low-end response (58 Hz) and 105° off-axis performance (2 to 10 kHz, indepen-dently verified). SoundTube®'s proprietary BroadBeam® waveguide tweeter system delivers consistent high-performance audio across the operating bandwidth. The patented ZeroReflection™ enclosure technology provides optimal sound reproduction and cabinet rigidity. The easy access six-position selectable tap switch for 25-, 70.7- and 100-volt applications with transformer bypass position simplifies ordering and inventory tracking. The RS800i speaker design incorporates a low-profile grille, a proprietary motor-board, driver protection circuitry and a six-position tap switch with a transformer bypass position. Hanging hardware with galvanized steel cables are included and features a SpeedClamp™ self-locking cable grip for fast, easy and secure installation. Euroblock connector and terminal weather boot are included.

Features:

• Patented BroadBeam® waveguide technology delivers a consistent dispersion pattern for maximum intelligibility and edge-to-edge coverage (up to 10 kHz, independently verified).

• One 8.0 inch (203 mm) polypropylene woofer and one 1.0 inch (25 mm) convex titanium tweeter with FerroFluid cooling mounted to a proprietary castaluminum baffle and heat sink.

• Weatherized components for indoor and outdoor applications.

• Includes UL listed hanging hardware with galvanized steel cables and integrated SpeedClamp™ self-locking cable grip for fast, easy and secure installation. Also includes Euroblock connector and terminal weather boot.

• Patented ZeroReflection™ enclosure technology for optimal sound reproduction and cabinet rigidity.

• Easy access six-position selectable tap switch for 25-, 70.7- and 100-volt applications with transformer bypass position simplifies ordering and inventory tracking.

• Steel grille with protective powdercoated finish for lasting durability.

• Average sensitivity of 89.5 dB offers high-output capabilities and reduced amplification costs.

• UL 1480 (UEAY), 2239 (hanging cable) and Milspec 810 approved.

• High-quality black paint finish.

Specifications:
Color: Black
UPC: 644216202300
Manufacturer: SoundTube
Manufacturer's Category: RSi Original Pendant
Height: 17.23 in / 437.6 mm
Width/Diameter: 14.82 in / 376.4 mm
Shipping Weight: 26.4 lbs / 11.97 kg
Carton Height: 19.5 in / 495.3 mm
Carton Length: 18 in / 457.2 mm
Carton Width: 18 in / 457.2 mm
Certifications: CE, MIL Spec, RoHS, UL1480A, UL2239
Enclosure Properties: ABS Glass Fiber Reinforced, Injection Molded, Ported
Enclosure Volume: 1288.3 cu in / 21111.45 cu cm
Included Accessories: Euroblock, Hanging Hardware, Safety Cable, Terminal Weather Boot
Optional Accessories: Black Grille (GRL-RS800-BK)|10' Hanging Cable (AC-RS-HH-10)|20' Hanging Cable (AC-RS-HH-20)|50' Hanging Cable (AC-RS-HH-50)|Black Mounting Bracket (AC-RS-SM8-BK)|Connector (EUROBLOCK)|Black Weatherboot (WEATHERBOOT-L-BK)|Beam Clamp (AC-BC1)|Forged Eye Bolt (AC-FE1)|Black Split Loom Tubing (AC-SLT-10-BK)|Snap Link (AC-SL1)
Source Inputs: 4 Pin 5.08mm Euroblock
TAA Compliant (Trade America): No
BAA Compliant (Made in USA): No
Coverage Angle (±6dB @ 2kHz): 115°
Crossover Frequency: 3.0 kHz
Directivity Factor (Q) (Averaged 100Hz - 10kHz, @ 2kHz): 4.7 and 5.5
Directivity Index (DI) dB (Averaged 100Hz - 10kHz, @ 2kHz): 5.8dB and 7.4dB
Frequency Response (± 10 dB): 58 Hz - 22 kHz
Frequency Response (± 3 dB): 80 Hz - 22 kHz
Grille Properties: Powder-Coated, Steel
Low Frequency Voice Coil: 1.2 in / 30.4 mm
Low Pass Crossover: 12 dB per octave 2nd order
Max. Continuous Power RMS: 125W
Max. Program Power: 250 W
Minimum Impedance (Ω Ohms): 5.3 Ω
Network Type: High Pass: 12 dB per octave 2nd order
Nominal Impedance (Ω Ohms): 8 Ω
Tweeter Driver: 1" Convex Aluminum w/ BroadBeam® Waveguide
Woofer Driver: 8" Polypropylene Cone w/ Butyl Rubber Surround
Sensitivity dB @ 1W/1M: 89.5 dB
Sensitivity dB @ 2.83V/1M: 89.5 dB
Tap Selector: Rotary Switch
Transformer Options: 25 / 70.7 / 100 V, 8 Ohm direct
Transformer Taps Max. Setting (25V/70.7V/100V): 9W/66W/66W

SoundTube MM32-EZ-BK Mighty Mite 3" Two Way Hanging Pendant Speaker Subwoofer

The MM32-EZ is a 2-way pendant speaker with a 5.25” dual-chamber, band-pass subwoofer and a 3” wide range driver, with high-frequency dispersion technology for wide off-axis coverage. Mighty Mite’s subwoofer with phase-aligned bass produces even, full-range coverage, smooth response, and loud, clean sound from one point of origin. With its built-in subwoofer and expansive coverage over larger areas than conventional pendant speakers, the Mighty Mite generates exceptional sound for music and voice applications. In addition, the speaker’s wide coverage capabilities mean fewer speakers are needed thus further reducing both hardware and labor costs for the project.

Ideal for paging, background music, foreground music and most open-ceiling applications, Mighty Mites have a built-in 30-Watt transformer for standard 25/70/100-volt applications or can be used as direct 8-ohm speakers. The unique driver combination gives unprecedented phase-matched audio between the low, mid, and high frequencies.

Mighty Mite has an integrated hanging bracket at the top of the speaker and comes with UL-listed hanging hardware with cables and integrated SpeedClamp™ self-locking wire grip for fast, easy, and secure installation. The MM32-EZ is 22” high with a 7.4” diameter, weighs 14 lbs. and is available in black, white, and silver.

Features:
3” full-range driver and 5.25” subwoofer
2-way pendant speaker
Full-range pendant speaker with built-in dual-chamber bandpass subwoofer
Hanging hardware included
Powder-coated seamless magnetic grille
Three color options available: Black

Specifications:
Color: Black
UPC: 644216231607
Manufacturer: SoundTube
Manufacturer's Category: MM/DS Contemporary Pendants
Height: 21.9 in / 556 mm
Width/Diameter: 7.4 in / 188 mm
Shipping Weight: 12.75 lbs.
Certifications: CE
Enclosure Properties: ABS
Included Accessories: Hanging Hardware
Source Inputs: 4 Pin Ceramic Terminal
TAA Compliant (Trade America): No
BAA Compliant (Made in USA): No
Crossover Frequency: 100 Hz
Frequency Response (± 10 dB): 36 Hz - 21 kHz
Frequency Response (± 3 dB): 68 Hz - 18.7 kHz
Grille Properties: Magnetic, Powder-Coated
Max. Continuous Power RMS: 25 W
Max SPL @ 1M: 98 dB
Max. Program Power: 50 W
Nominal Impedance (Ω Ohms): 8 Ω
Fullrange Driver: 3" Polypropylene driver with butyl rubber surround
Subwoofer Driver: 5.25" Polypropylene Cone w/ Rubber Surround
Sensitivity dB @ 1W/1M: 84 dB
Sensitivity dB @ 2.83V/1M: 84 dB
Tap Selector: Rotary Switch
Transformer Options: Included 70.7 / 100 V transformer (30 W maximum)

SoundTube DS31-EZ-TS-BK 3" Tapered Designer Sleeve Pendant Mount Speaker Black

The Designer Sleeve DS31-EZ pendant speakers were developed to offer varying aesthetic options for open ceiling and near space applications that require a design element to meet décor needs. The speaker can be used with or without the sleeve based on the desired look with multiple contemporary slide-on sleeves to match any aesthetic. The speakers blend well with drop lighting and are available in black (DS31-EZ-BK).

The DS31-EZ is a premium full-range 3-inch pendant-mount speaker with a polypropylene driver and butyl rubber surround for long lasting performance. The DS31-EZ incorporates the ultra-low profile ZeroReflection™ ABS enclosure with a magnetically attached grille with a protective power coated finish. The Designer Sleeve’s IPX6 rating makes it ideal for indoor or outdoor use.

Features:

• 3-inch Designer Sleeve Pendant Speaker

• Black Tapered Sleeve

• Magnetic Grille

• Surface Mounting Bracket

What's included:

• Designer Sleeve Pendant Speaker (DS31-EZ-BASE)

• Black Tapered Sleeve (AC-DS31-EZ-TS-BK)

• Black Magnetic Grille (GRL-DS31-EZ-BK)

• Black Surface-Mounting Bracket (AC-SMB-DS31-BK)

Specifications:

Color: Black

UPC: 644216229505

Manufacturer: SoundTube

Manufacturer's Category: MM/DS Contemporary Pendants

Height:  8.25 in / 209.55 mm

Width/Diameter:  4.75 in / 120.65 mm

Shipping Weight: 6 lbs / 2.7 kg

Certifications:  CE, RoHS

Enclosure Properties: ABS

Included Accessories: Grille, Hanging Hardware, Mounting Assembly, Wire Nuts, Designer Sleeve

Source Inputs: Wire Leads

IP Rating: IPX6

TAA Compliant (Trade America): No

BAA Compliant (Made in USA): No

Coverage Angle (±6dB @ 2kHz): 90°

Directivity Factor (Q) (Averaged 100Hz - 10kHz, @ 2kHz): 4.9 and 7.1

Directivity Index (DI) dB (Averaged 100Hz - 10kHz, @ 2kHz): 5.1 dB and 8.5 dB

Frequency Response (± 10 dB): 80 Hz - 20 kHz

Frequency Response (± 3 dB): 115 Hz - 14 kHz

Grille Properties: Magnetic, Powder-Coated, Steel

Max. Continuous Power RMS: 30 W

Max SPL @ 1M: 97.2 dB RMS, 112 dB Max

Max. Program Power: 60 W

Nominal Impedance (Ω Ohms): 8 Ω

Fullrange Driver: 3" Polypropylene driver with butyl rubber surrounda

Sensitivity:  dB @ 1W/1M 87 dB

Tap Selector: Rotary Switch

Transformer Options: 25 / 70.7 / 100 V, 8 Ohm direct

Transformer Taps Max. Setting (25V/70.7V/100V): 5W/20W/20W

SoundTube DS31-EZ-CS-WH Cylindrical Designer Sleeve Pendant Mount Speaker White

The Designer Sleeve DS31-EZ pendant speakers were developed to offer varying aesthetic options for open ceiling and near space applications that require a design element to meet décor needs. The speaker can be used with or without the sleeve based on the desired look with multiple contemporary slide-on sleeves to match any aesthetic. The speakers blend well with drop lighting and are available in white (DS31-EZ-WH).

The DS31-EZ is a premium full-range 3-inch pendant-mount speaker with a polypropylene driver and butyl rubber surround for long lasting performance. The DS31-EZ incorporates the ultra-low profile ZeroReflection™ ABS enclosure with a magnetically attached grille with a protective power coated finish. The Designer Sleeve’s IPX6 rating makes it ideal for indoor or outdoor use.

Features:

• 3-inch Designer Sleeve Pendant Speaker

• White Cylindrical Sleeve

• Magnetic Grille

• Surface Mounting Bracket

What's included:

• Designer Sleeve Pendant Speaker (DS31-EZ-BASE)

• White Cylindrical Sleeve (AC-DS31-EZ-CS-WH)

• White Magnetic Grille (GRL-DS31-EZ-WH)

• White Surface-Mounting Bracket (AC-SMB-DS31-WH)

Specifications:

Color: White

UPC: 644216229307

Manufacturer: SoundTube

Manufacturer's Category: MM/DS Contemporary Pendants

Height:  8.5 in / 215.9 mm

Width/Diameter:  5.5 in / 139.7 mm

Shipping Weight: 6 lbs / 2.72 kg

Certifications:  CE, RoHS

Enclosure Properties: ABS

Included Accessories: Grille, Hanging Hardware, Mounting Assembly, Wire Nuts, Designer Sleeve

Source Inputs: Wire Leads

IP Rating: IPX6

TAA Compliant (Trade America): No

BAA Compliant (Made in USA): No

Coverage Angle (±6dB @ 2kHz): 90°

Directivity Factor (Q) (Averaged 100Hz - 10kHz, @ 2kHz): 4.9 and 7.1

Directivity Index (DI) dB (Averaged 100Hz - 10kHz, @ 2kHz): 5.1 dB and 8.5 dB

Frequency Response (± 10 dB): 80 Hz - 20 kHz

Frequency Response (± 3 dB): 115 Hz - 14 kHz

Grille Properties: Magnetic, Powder-Coated, Steel

Max. Continuous Power RMS: 30 W

Max SPL @ 1M: 97.2 dB RMS, 112 dB Max

Max. Program Power: 60 W

Nominal Impedance (Ω Ohms): 8 Ω

Fullrange Driver: 3" Polypropylene driver with butyl rubber surround

Sensitivity dB:  @ 1W/1M 87 dB

Tap Selector: Rotary Switch

Transformer Options: 25 / 70.7 / 100 V, 8 Ohm direct

Transformer Taps Max. Setting (25V/70.7V/100V):  5W/20W/20W

SoundTube IPD-SM52-EZ-WX-WH 5.25" Two Way Surface Mount Loud Speaker

The IPD-SM52-EZ-WX is a Dante-enabled, weather resistant, digital end-point solution in a surface-mount loud speaker. This speaker includes a 40 W PoE amplifier for simplified installation and set up. Driver components consists of one 5.25 inch polypropylene woofer and one 1.0 inch soft dome tweeter in a ported enclosure. The included pre-mountable surface-mount bracket allows for quick and easy installation and the powder-coated aluminum grille keep the speaker looking good in most environments. The system is UL 60065 approved. IP-Rating: IP65. Included accessories: Safety cable, wall mount bracket, conduit connector, and port plug. If used outdoors, port plugs must be installed to ensure protection from moisture.

*Note: If used indoors, remove the grille and take the plug out of the port for greater bass output. Port must remain plugged to maintain IP65 rating in outdoor use. Also: SoundTube IPD speakers are NOT compatible with PoE++. 30W PoE maximum (or 40W maximum with STNet Switch II).

Features:

• IP65 Weather-Resistant with Plug

• 2-Way Surface Mount

• Dante Enabled, 40W PoE Amplifier

• 5.25" Woofer, 1" Tweeter

Specifications:
Color: White
UPC: 644216231805
Manufacturer: SoundTube
Manufacturer's Category: STNet IP-Addressable and Dante Series
Depth: 6.63 in / 168.4 mm
Height: 11.88 in / 301.75 mm
Width/Diameter: 7.5 in / 190.5 mm
Shipping Weight: 7.8 lbs / 3.54 kg
Carton Height: 12 in / 304.8 mm
Carton Length: 15 in / 381 mm
Carton Width: 10.5 in / 266.7 mm
Certifications: CE, IP65, RoHS, UL60065
Enclosure Properties: High Impact Polystyrene
Included Accessories: Mounting Hardware, Port Plug, Safety Cable
Source Inputs: RJ45 Ethernet Port
IP Rating: IP65
TAA Compliant (Trade America): No
BAA Compliant (Made in USA): No
Coverage Angle (±6dB @ 2kHz): 91° Horizontal / 120° Vertical
Crossover Frequency: 3.5 kHz
Directivity Factor (Q) (Averaged 100Hz - 10kHz, @ 2kHz): 6.9 and 5.9
Directivity Index (DI) dB (Averaged 100Hz - 10kHz, @ 2kHz): 5.2 and 7.7
Frequency Response (± 10 dB): 55 Hz - 20 kHz | Sealed: 62 Hz - 20 kHz
Frequency Response (± 3 dB): 65 Hz - 20 kHz | Sealed: 80 Hz - 20 kHz
Grille Properties: Aluminum, Powder-Coated, White
Low Frequency Voice Coil: 25.4 mm (1") high temperature Kapton
Max SPL @ 1M: 97 dB
Tweeter Driver: 1" Soft Dome
Woofer Driver: 5.25" Polypropylene Cone w/ Butyl Rubber Surround

SoundTube MM32-EZ-WH 2 Way Dual Chamber 3" Hanging Pendant Speaker Subwoofer

The MM32-EZ is a 2-way pendant speaker with a 5.25” dual-chamber, band-pass subwoofer and a 3” wide range driver, with high-frequency dispersion technology for wide off-axis coverage. Mighty Mite’s subwoofer with phase-aligned bass produces even, full-range coverage, smooth response, and loud, clean sound from one point of origin. With its built-in subwoofer and expansive coverage over larger areas than conventional pendant speakers, the Mighty Mite generates exceptional sound for music and voice applications. In addition, the speaker’s wide coverage capabilities mean fewer speakers are needed thus further reducing both hardware and labor costs for the project.

Ideal for paging, background music, foreground music and most open-ceiling applications, Mighty Mites have a built-in 30-Watt transformer for standard 25/70/100-volt applications or can be used as direct 8-ohm speakers. The unique driver combination gives unprecedented phase-matched audio between the low, mid, and high frequencies.

Mighty Mite has an integrated hanging bracket at the top of the speaker and comes with UL-listed hanging hardware with cables and integrated SpeedClamp™ self-locking wire grip for fast, easy, and secure installation. The MM32-EZ is 22” high with a 7.4” diameter, weighs 14 lbs. and is available in white.

Features:

• Two way pendant speaker

• Phase Aligned Bass

• 30W Transformer for Standard 25/70/100V

• Integrated Hanging Bracket

Specifications:
Color: White
UPC: 644216228300
Manufacturer: SoundTube
Manufacturer's Category: MM/DS Contemporary Pendants
Height: 21.9 in / 556 mm
Width/Diameter: 7.4 in / 188 mm
Shipping Weight: 12.75 lbs.
Certifications: CE
Enclosure Properties: ABS
Included Accessories: Hanging Hardware
Source Inputs: 4 Pin Ceramic Terminal
TAA Compliant (Trade America): No
BAA Compliant (Made in USA): No
Crossover Frequency: 100 Hz
Frequency Response (± 10 dB): 36 Hz - 21 kHz
Frequency Response (± 3 dB): 68 Hz - 18.7 kHz
Grille Properties: Magnetic, Powder-Coated
Max. Continuous Power RMS: 25 W
Max SPL @ 1M: 98 dB
Max. Program Power: 50 W
Nominal Impedance (Ω Ohms): 8 Ω
Fullrange Driver: 3" Polypropylene driver with butyl rubber surround
Subwoofer Driver: 5.25" Polypropylene Cone w/ Rubber Surround
Sensitivity dB @ 1W/1M: 84 dB
Sensitivity dB @ 2.83V/1M: 84 dB
Tap Selector: Rotary Switch
Transformer Options: Included 70.7 / 100 V transformer (30 W maximum)

SoundTube RVC-BK Remote Volume Control and Source Selector Use with IPD-Hub 2

Rotary remote volume control knob and source selector for use with IPD-Hub 2 Scalable systems. Includes black wall plates. The IPD-Hub 2 utilizes a Dante infrastructure for flexible audio distribution. The amp is complete with local and Dante inputs and local and network control to address requirements for commercial audio connectivity in numerous scalable systems such as retail, bar, restaurants, hospitality, spas, education facilities, and more.

Features:
Remote Volume and source select
IPD-Hub 2 Scalable systems

Specifications:
Color: Black
UPC: 644216227600
Manufacturer: SoundTube
Manufacturer's Category: STNet IP-Addressable and Dante Series
Depth: 1.875 in / 47.625 mm
Height: 4 in / 101.6 mm
Width/Diameter: 1.625 in / 41.275 mm
Shipping Weight: 0.4 lb / 0.18 kg
Carton Height: 2.625 in / 66.675 mm
Carton Length: 5.75 in / 146.05 mm
Carton Width: 3 in / 76.2 mm
Source Inputs: RJ45 Ethernet Port
TAA Compliant (Trade America): No
BAA Compliant (Made in USA): No

SoundTube CM62-EZS-II-WH Two Way 6" In Ceiling Blind Mount Speaker White

The next generation version of the CM62-EZs with improved and additional features. Engineered for applications with limited plenum space, incorporating a SoundTube-specific shallow backcan with an installed depth of only 3.5 inches. One 6.50 in (165.0 mm) treated fiber woofer with cloth surround and one 1.00 in (25.4 mm) silk dome tweeter. Easy-access six-position tap switch for 25/70.7/100-volt and 16 ohm transformer bypass position allows for easy ordering, stocking and installation. Reduced amplification costs with maximum efficiency including 90.5 dB sensitivity and 16 ohm impedance. Superior voice intelligibility with a 10 kHz coverage angle of 80 (independently verified). Cost-effective 16 ohm settings allows for the use of multiples of two, four, or six speakers in a system using a standard amplifier without a trans former. Incorporates a painted steel grille for lasting durability. Ceramic input terminal accepts up to 10 gauge plenum rated signal wire and includes thermal fuse. Suitable for use in voice alarm applications subject to EU regulations EN60849 and BS5839-8. EN54-24 listed. Adaptable to material thicknesses ranging from 0.04 inch (0.9 mm) 1.60 inch (40.6 mm). UL 1480 (UEAY) and 2043, cUL, CE (EMC Directive 89/366/EEC, EN55020, EN55013) approved. IP-Rating: IPX3.

Included accessories: Choose between a tile bridge or a pre-construction bracket, UL-listed 0.5-inch flex conduit clamp, paint shield and two wire nuts.

Features:

• Two Way, Blind Mount Speaker

• Shallow 3.5" Back can

• 16 Ohms

• Six-Position Transformer Tap Switch

• 25 / 70 / 100V Operation

• 120° Coverage

• Painted Steel Grille

• Includes 0.5" Flex Conduit Clamp

• Includes Paint Shield and Two Wire Nuts

Specifications:

Color: White

UPC: 752830442689

Manufacturer: SoundTube

Manufacturer's Category: CM-EZ Economical In-Ceiling

Shipping Weight: 9.15 lbs / 4.15 kg

Carton Height: 6.25 in / 158.75 mm

Carton Length: 13 in / 330.2 mm

Carton Width: 13 in / 330.2 mm

Certifications: CE, EN54, RoHS, UL1480A, UL2043

Enclosure Properties: ABS Glass Fiber Reinforced, Injection Molded, Sealed

Enclosure Volume: 350 cu in / 5735.47 cu cm

Included Accessories: Conduit Clamp, Cover Plate, Grille, Paint Mask, Choose Between a Tile Bridge or Pre-Construction Bracket

Optional Accessories: White Grille (GRL-CM6/8EZ-II-WH)|Tile Bridge (AC-CMEZ6/8-TB)|Pre-Construction Bracket (AC-CMEZ6/8-PCB)|Junction Box (AC-CM-EZ-JBOX)

Source Inputs: 4 Pin Ceramic Terminal

IP Rating: IPX3

TAA Compliant (Trade America): No

BAA Compliant (Made in USA): No

Backcan Diameter: 9.67 in / 245.6 mm

Backcan Height: 3.25 in / 82.5 mm

Coverage Angle (±6dB @ 2kHz): 120°

Crossover Frequency: 4.0 kHz

Cutout Width/Diameter: 10.5 in / 266.7 mm

Directivity Factor (Q) (Averaged 100Hz - 10kHz, @ 2kHz): 5.1 and 5

Directivity Index (DI) dB (Averaged 100Hz - 10kHz, @ 2kHz): 6.2dB and 7.0dB

Frequency Response (± 10 dB): 75 Hz - 22 kHz

Frequency Response (± 3 dB): 135 Hz - 20 kHz

Grille Properties: Standard-Flange, Friction-Fit, White, Paintable, Painted, Steel

Low Frequency Voice Coil: 1 in / 25.4 mm

Low Pass Crossover: 12 dB per octave 2nd order

Max. Ceiling Thickness: 1.6 in / 40.6 mm

Max. Continuous Power RMS: 50W

Max. Program Power: 100 W

Minimum Impedance (Ω Ohms): 17.9 Ω

Minimum Ceiling Thickness: 0.04 in / 0.9 mm

Network Type: High Pass: 6 dB per octave 1st order

Nominal Impedance (Ω Ohms): 16 Ω

Tweeter Driver: 1" Silk Dome

Woofer Driver: 6.5" Treated Fiber Cone w/ Cloth Surround

Sensitivity dB:  @ 1W/1M 90 dB

Sensitivity dB:  @ 2.83V/1M 87.5 dB

Tap Selector: Rotary Switch

Transformer Options: 25 / 70.7 / 100 V, 16 Ohm direct

Transformer Taps Max. Setting (25V/70.7V/100V):  4W/32W/32W

Visible Diameter: 11.75 in / 298.5 mm

Visible Height:  0.34 in / 8.6 mm

SoundTube STNET-SWITCH-II 16 Port 40 W PoE Rack Mountable Smart Managed Switch

Rack mountable 16-port 40 W PoE per port audio quality switch designed for use in Dante Networks. Designed to work out of the box, with Dante enabled networks. In addition to the 16 Ethernet ports, the STNet-Switch II includes two SFP ports that can be adapted to fiber or high speed Ethernet connections. The two SFP ports can be turned into a high speed optical fiber ports or copper Ethernet ports with the addition of a Gigabit SFP transceiver module.

Features:

• Smart Managed Switch

• 16 ports of PoE, PoE+ or Proprietary 40W PoE

• 700w Audio Quality Power Supply

• 2 SFP Expansion Ports

• Dante Compatible out of the Box

• Presets available for QoS and IGMP Snooping

• Current Firmware Version: v1.02.1368

Specifications:
Color: Black
UPC: 644216221202
Manufacturer: SoundTube
Manufacturer's Category: STNet IP-Addressable and Dante Series
Depth: 8.3 in / 210.82 mm
Height: 1.73 in / 43.94 mm
Width/Diameter: 17.4 in / 441.96 mm
Shipping Weight: 7.71
Certifications: CE, RoHS, ETL-C/US, FCC
Included Accessories: Power Supply
TAA Compliant (Trade America): Yes
BAA Compliant (Made in USA): No
Power Requirements 110-240 VAC 50/60 Hz; 8.5 Amps max consumption

SoundTube WLL-TR-1P-II Uncompressed Wireless Transmitter and Receiver System

The WLL-TX1 wireless transmitter unit transmits uncompressed stereo audio wirelessly for maximum fidelity. Audio input options for the transmitter unit include USB, stereo mini or 1/4" balanced input connections at the transmitter. A High/Low power selector switch on transmitter limits RF range where needed.

The WLL-RX1p wireless receiver unit contains a 2-channel 50W/ch Class D amplifier which will power up to two speakers. Receiver output options include Push-On phoenix connectors or 1/4" connections. The WLL-RX1P also includes stereo line output for connecting auxiliary audio components. A Local Audio source may also be used at the receiver via stereo mini which mutes the wireless signal when connected.

An additional 5 receivers (for a total of 6) may be ordered to accompany a single transmitter. Two additional transmitters can be used with separate frequencies with a total of up to 18 receiver units. Each transmitter/receiver contains 3 RF channels to minimize interference from other devices. Each channel contains 3 bands, alternating between them to preemptively counteract interference, keeping the signal clear and latency less than 20ms

Features:

• RF Band: 2.4 GHz

• Operating Range (full power): 150 ft indoors / 210 ft line of sight

• Operating Range (low power): 50 ft indoors / 70 ft line of sight

• Modulation: Digital

• Dynamic Range: 90 dB

• Antenna Impedance: 50 ohm

• Housing Material: Powder Coated Metal

Specifications:
Color: Black
Manufacturer: SoundTube
Manufacturer's Category: Amplifier
Depth: 6.5 in / 165.1 mm
Height: 1.75 in / 44.45 mm
Width/Diameter: 6.1875 in / 157.16 mm
Shipping Weight: 4.8 lbs / 2.18 kg
Carton Height: 6 in / 152.4 mm
Carton Length: 12.5 in / 317.5 mm
Carton Width: 9 in / 228.6 mm
Certifications: CCC, CE, RoHS, UL60065, FCC
Included Accessories: Antenna, Power Supply, Rack Mount Adapters
Optional Accessories: Rack Mount Adaptor (AC-WLL-RMA)|Power Supply (AC-PS3240)|EU Power Supply (AC-PS3240-EU)|International Power Supply (AC-PS512-INTL)
TAA Compliant (Trade America): No
BAA Compliant (Made in USA): No
Power Requirements: Transmitter: 5V 1.2A | Receiver: 32V 4.0A
Frequency Response (± 3 dB): 20 Hz - 20 kHz

SoundTube SM82-EZ-II-WH Two Way 8" Surface Mount Speaker for Music & Paging

The SM82-EZ-II is an economical solution for integrators who need a surface-mount indoor or outdoor speaker option for music and paging applications. SM82-EZ-II incorporates a dedicated 8-inch polypropylene woofer and an offset 1-inch soft dome tweeter with waveguide to deliver superb intelligibility for background to foreground music and messaging (up to 106.0 dB max. SPL). SoundTube's proprietary BroadBeam Ring™ technology in all models ensures high intelligibility, even well off-axis. The SM82-EZ-II uses a 64-watt low-insertion loss transformer and a six-position tap switch with a transformer bypass position. Enclosures for the SM52-EZ are ported, with port plugs included for outdoor use; grilles and mounting hardware are powder coated aluminum. Mounting for the SM82-EZ-II includes a proprietary, tool-free, low-profile Stealth™ bracket with a direct drive cam-wedge for stable and precise aiming up to 90 in one direction. Inputs are made via ceramic terminal strips, making these speakers suitable for European voice evacuation systems. A safety cable, wall mount bracket, conduit connector and port hole plug are all included.

Specifications:
Color: White
UPC: 748252172075
Manufacturer: SoundTube
Manufacturer's Category: SM-EZ Economical Surface Mount
Height: 18 in / 457.2 mm
Width/Diameter: 11.5 in / 292.1 mm
Shipping Weight: 17.65 lbs / 8 kg
Carton Height: 15 in / 381 mm
Carton Length: 21 in / 533.4 mm
Carton Width: 16.75 in / 425.45 mm
Certifications: CE, IP65, RoHS, UL1480A
Enclosure Properties: Polystyrene, Ported
Included Accessories: Back Cover, Mounting Hardware, Port Plug, Safety Cable, Wire Gland
Optional Accessories: White Grille (GRL-SM82-WH)|White Weatherboot (WEATHERBOOT-S-WH)|Port Plug (AC-SM8-PP)
Source Inputs: 4 Pin Ceramic Terminal
TAA Compliant (Trade America): No
BAA Compliant (Made in USA): No
Coverage Angle (±6dB @ 2kHz): 110°
Crossover Frequency: 2.5 kHz
Directivity Factor (Q) (Averaged 100Hz - 10kHz, @ 2kHz): 5.2 and 12.0
Directivity Index (DI) dB (Averaged 100Hz - 10kHz, @ 2kHz): 6.2dB and 10.8dB
Frequency Response (± 10 dB): 38 Hz - 22 kHz
Frequency Response (± 3 dB): 50 Hz - 20 kHz
Grille Properties: Aluminum, Powder-Coated
Low Pass Crossover: 12 dB per octave 2nd order
Max. Continuous Power RMS: 75W
Max. Program Power: 150 W
Minimum Impedance (Ω Ohms): 8 Ω
Mounting Depth: 9.88 in / 251 mm
Network Type: High Pass: 12 dB per octave 2nd order
Nominal Impedance (Ω Ohms): 8 Ω
Tweeter Driver: 1" Soft Dome
Woofer Driver: 8" Polypropylene
Sensitivity dB @ 1W/1M: 87 dB
Sensitivity dB @ 2.83V/1M: 87 dB
Tap Selector: Rotary Switch
Transformer Options: 25 / 70.7 / 100 V, 8 Ohm direct
Transformer Taps Max. Setting (25V/70.7V/100V): 8W/64W/64W

SoundTube RVC Remote Volume Control Knob & Source Selector IPD-Hub 2 Amplifier

Rotary remote volume control knob and source selector for use with IPD-Hub 2 Scalable systems. Includes both black and white wall plates. The IPD-Hub 2 utilizes a Dante infrastructure for flexible audio distribution. The amp is complete with local and Dante inputs and local and network control to address requirements for commercial audio connectivity in numerous scalable systems such as retail, bar, restaurants, hospitality, spas, education facilities, and more.

Specifications:
Color: Black
UPC: 644216227600
Manufacturer: SoundTube
Manufacturer's Category: STNet IP-Addressable and Dante Series
Depth: 1.875 in / 47.625 mm
Height: 4 in / 101.6 mm
Width/Diameter: 1.625 in / 41.275 mm
Shipping Weight: 0.4 lb / 0.18 kg
Carton Height: 2.625 in / 66.675 mm
Carton Length: 5.75 in / 146.05 mm
Carton Width: 3 in / 76.2 mm
Source Inputs: RJ45 Ethernet Port
TAA Compliant: (Trade America) No
BAA Compliant: (Made in USA) No