Audix ADX40 Miniature Hanging Overhead Condenser Microphone for Vocal and Choir
Ships Free!
The ADX40 is a miniaturized condenser microphone designed to hang from an overhead position for applications such as group vocals, choir, theatrical production, and room ambiance.
Having a uniformly controlled cardioid polar pattern, the ADX40 helps isolate the area or section being miked from other vocals or instruments on stage. The ADX40 is also available in a hypercardioid polar pattern for tighter pick-up control. With a wide frequency range of 40 Hz – 20 kHz, the ADX40 provides natural sound with an exceptional sound response.
The ADX40 miniature hanging condenser microphone is supplied with an attached 30′ shielded cable, external windscreen, wire hanger for positioning, and phantom power adapter. 9 – 52 V phantom required.
Specifications
Transducer Type: Condenser
Frequency Response: 40 Hz – 20 kHz
Polar Pattern: Cardioid Hypercardioid (ADX40HC)
Output Impedance: 250 ohms balanced
Sensitivity: 5 mV / Pa @ 1k
Equivalent Noise Level: 29 dB (A weighted)
Signal to Noise Ratio: 65 dB
Maximum SPL: ≥130 dB
Power Requirements: 9 – 52 Volts phantom
Cable/Connector: Shielded 30’ terminating to a miniature 3 pin Female XLR connector
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Materials / Finish: Brass / Black E-Coat
Weight: 110 g / 4 oz
Length: 30 mm / 1.2 in
What's in the Box
Audix ADX40 Miniature Hanging Overhead Condenser Microphone for Vocal and Choir
Ships Free!
The ADX40 is a miniaturized condenser microphone designed to hang from an overhead position for applications such as group vocals, choir, theatrical production, and room ambiance.
Having a uniformly controlled cardioid polar pattern, the ADX40 helps isolate the area or section being miked from other vocals or instruments on stage. The ADX40 is also available in a hypercardioid polar pattern for tighter pick-up control. With a wide frequency range of 40 Hz – 20 kHz, the ADX40 provides natural sound with an exceptional sound response.
The ADX40 miniature hanging condenser microphone is supplied with an attached 30′ shielded cable, external windscreen, wire hanger for positioning, and phantom power adapter. 9 – 52 V phantom required.
Specifications
Transducer Type: Condenser
Frequency Response: 40 Hz – 20 kHz
Polar Pattern: Cardioid Hypercardioid (ADX40HC)
Output Impedance: 250 ohms balanced
Sensitivity: 5 mV / Pa @ 1k
Equivalent Noise Level: 29 dB (A weighted)
Signal to Noise Ratio: 65 dB
Maximum SPL: ≥130 dB
Power Requirements: 9 – 52 Volts phantom
Cable/Connector: Shielded 30’ terminating to a miniature 3 pin Female XLR connector
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Materials / Finish: Brass / Black E-Coat
Weight: 110 g / 4 oz
Length: 30 mm / 1.2 in
What's in the Box
Image 1 of 4
Image 2 of 4
Image 3 of 4
Image 4 of 4