BiAmp DP6-B D Series Two Way 6.5 Inch High Output Pendant Mount Loudspeaker

BiAmp DP6-B D Series Two Way 6.5 Inch High Output Pendant Mount Loudspeaker

The D SERIES Distributed Design DP6 is a high performance 6.5-inch pendant loudspeaker designed for open

architecture spaces or any location where a stylish pendant form factor is desired. Featuring high power handling, high sensitivity and realistic sound reproduction, the DP6 can be used in a wide variety of speech and music applications. It is equipped with a built-in autoformer, allowing the full loudspeaker output to be realized with 70V or 100V distribution lines.

Uniform voicing means that the DP6 can be combined with other D SERIES ceiling and surface mount models

without compromising consistency from zone to zone. The genuine coaxial design uses separate magnets for the LF and HF drivers for reduced distortion and industry-leading sensitivity, thereby permitting 3 dB to 6 dB greater output level while requiring half the amplification power of competing products. The proprietary Tru-Phase™ waveguide and perfectly centered driver produce a consistently wide conical polar response up to 16 kHz. Community’s patented Carbon Ring Cone Technology™ increases the effective cone area to further reduce distortion while reinforcing the cone for improved durability.

An easy-access selector switch is conveniently located on the face of the loudspeaker for selectable 8 ohm or 70V/100V operation, while an integrated rear cover hides all wiring and hanging hardware for an aesthetically pleasing installation. Two 15-foot (4.5m) long 2mm (0.079”) high tensile galvanized steel wire rope suspension cables with integrated spring clips for attaching the cable to the enclosure are included, along with Gripple™ brand adjustable height cable fasteners. Optional accessories include 30ft (9.1m) and 50ft (15.2m) hang kits, a replacement Gripple™ speed clamp and trimmable 14ft (4.3m) decorative split loom tubing.

The powerful and versatile D SERIES DP6 provides high quality paging and musical performance suitable for retail

environments, restaurants, resorts, and numerous other applications where the importance of sonic quality cannot be ignored. 

FEATURES

• Stylish, contoured contemporary pendant design

• Same components and voicing as the Distributed Design ceiling and surface mount loudspeaker family

• Consistent, wide dispersion up to 16 kHz

• True coaxial loudspeakers with HF compression drivers

• Tru-Phase™ high-frequency waveguide

• Patented Carbon Ring Cone Technology™

• High efficiency, high output, high intelligibility, low distortion

• Paintable enclosure constructed of high-impact ABS plastic to reduce resonances

• Easy-access power tap switch for selectable 8 ohm or 70V/100V operation

• Integrated rear cover hiding all wires and hanging hardware

• Weather-resistant constructed with treated drivers and twolayer powder coated grilles

• ETL listed to comply with UL1480

• Available in standard black or white finishes

• Five year warranty

Specifications:

Loudspeaker Type: Two-way, full-range, coaxial pendant mount loudspeaker, 8 ohm or 70V/100V operation

Operating Range: 65 Hz - 22 kHz

Frequency Response: 80 Hz - 20 kHz (±5 dB)

Max Input Ratings (8 ohm): 100W continuous, 250W program

        28 volts RMS, 63 volts momentary peak

Transformer Taps - 70V:  60W, 30W, 15W, 7.5W and low impedance

                  100V:  60W, 30W, 15W

Distortion - 10% Full Power: 2nd Harmonic 3rd Harmonic

500 Hz 1.74% 1.19%

2 kHz  1.18% 0.35%

8 kHz 0.77% 0.04%

Sensitivity (1W/1m): 94 dB SPL (125 Hz to 12.5 kHz 1/3 octave bands)

                92 dB SPL (250 Hz to 4 kHz speech range)

Maximum Output: 114 dB SPL / 120 dB SPL (peak 8 ohm)

Nominal Impedance: 8 ohms

Minimum Impedance: 6.9 ohms @ 210 Hz

Nominal Coverage: 115º conical (1 kHz to 6 kHz)

125º conical (500 Hz to 6 kHz)

Axial Q / DI: 4.7 / 6.7, 500 Hz to 6 kHz

Crossover Frequency: 1.2 kHz

Recommended Signal Processing: 65 Hz high pass filter

Drivers: LF 1 x 6.5-inch

HF 1 x 1-inch exit compression driver

Driver Protection: Self-resetting solid state circuit breaker

Input Connection: Two 2-position Euroblock connectors

Controls: Front-face wattage / low impedance selector switch

Enclosure: UL 94V-0 rated ABS plastic, matte finish, paintable

Finish: Black or white

Mounting/Rigging Provisions: Two PHK-15 pendant hang kits (one for main suspension and one as a safety cable), each including 15ft (4.5m) long 2mm (0.77") high tensile galvanized steel wire rope suspension cables with integrated spring clips for attaching the cable to the loudspeaker bracket and Gripple™ brand adjustable height cable fasteners.

Grille: Powder coated steel with safety line, black or white finish, paintable

Baffle: Reflex loaded UL 94V-0 rated ABS

Safety Features: Included safety cable. Each cable has an SWL of 99 lbs (45 kg).

Safety Agency Ratings: ETL listed to comply with UL1480 and CSA60065.

Suspension system and Gripple™ brand cable fastener listed per UL1598 and UL2239, TUV and CSA

Class 3426-01 and Class 3426-81.

Required Accessories: Electronic high pass filter

Supplied Accessories: Two PHK-15 pendant hang kits

Enclosure ABS plastic rear cover

Rear cover ingress weather plug

Optional Accessories: PHK-30 30ft (9.1m) pendant hang kit

PHK-50 50ft (15.2m) pendant hang kit

PSC replacement Gripple™ speed clamp

PST-14 trimmable 14ft (4.3m) decorative split loom tubing

Dimensions - Height: 14.732 inches (374.2 mm) high enclosure

Diameter: 11.22 inches (285 mm) face diameter

Weight: 11.8 lbs (5.4 kg) 

APPLICATIONS

Bars and restaurants

Hotels, ballrooms and casinos

Shopping malls and retail environments

Health and fitness clubs

Houses of worship

Corporate meeting rooms

Airports, convention centers and exhibit halls

Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998.  We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.   

Shipping --Pro packed & shipped  USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed &  shipped. Processing times vary, 2-30  days

Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new. 

What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items,  electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids