FBT SUBLINE 115 SA 15" Active Subwoofer Speaker Systems 700 Watts
The SUBline 115SA has been completely redesigned with a bass-reflex configuration, built in birch plywood and aimed to extend the low frequency response to a wide range of FBT speaker systems.
Created with the aim to maximize SPL/SIZE ratio, they have Class D amplifiers, switch mode power supply and Digital Signal Processor with presets to match any other FBT speaker.
With IN/OUT stereo connectors, it is possible to use only one subwoofer with Left and Right speakers. The Neutrik TRUE1 Power connection negates the need for a power switch while offering a solid locking connection.
Optional wheels,, ergonomic integrated carrying handles and tour-grade plywood cabinets allow an easy transport
FEATURES:
Bass-reflex design with high SPL and punch
380mm (15”) high excursion magnet woofer with 75mm (3”) voice coil
Frequency response from 40Hz to 140Hz
New amplifier engineered and manufactured by FBT, 700W RMS LF in Class D
Digital Signal processor with 8 presets, 2 equalization with 2 LPF Crossover settings, cardioid configuration
Control panel with Stereo XLR in/outs, Volume, EQ presets, 8 steps Delay from 0.25m to 3.5m, Phase Reversal
Switch 0°-180°, 3 status LED indicators
15 mm (0.59”) birch plywood scratch resistant enclosure with internal bracing
M20 (20mm) top mount speaker stand socket and two aluminum ergonomic FBT handles
SPECIFICATIONS
CODE: 41222
CONFIGURATION: 1 way
BUILT-IN AMPLIFIER LF/HF: 700 W RMS
BUILT-IN AMPLIFIER PEAK LF/HF: 1400 W
FREQUENCY RESPONSE: 38Hz - 140Hz -6dB
LOW FREQUENCY WOOFER: 15 inch
MAXIMUM SPL CONT/PEAK: 132/135 Half-space dB
DISPERSION: omnidirectional HxV
INPUT IMPEDANCE: 22 Kohm
CROSSOVER FREQUENCY: 90 or 140Hz KHz
AC POWER REQUIREMENTS: 640 VA
INPUT CONNECTOR: stereo XLR with loop, HP out
POWER CORD: 6/19.7 m/ft
NET DIMENSION (WXHXD): 500x517x570 / 19.7x20.3x22.4 mm/inch
NET WEIGHT: 28/61.7 kg/lb
TRANSPORT DIMENSION (WXHXD): 600x617x670 / 23.6x24.3x26.4 mm/inch
TRANSPORT WEIGHT: 32/70.5 Kg/lb
FBT SUBLINE 115 SA 15" Active Subwoofer Speaker Systems 700 Watts
The SUBline 115SA has been completely redesigned with a bass-reflex configuration, built in birch plywood and aimed to extend the low frequency response to a wide range of FBT speaker systems.
Created with the aim to maximize SPL/SIZE ratio, they have Class D amplifiers, switch mode power supply and Digital Signal Processor with presets to match any other FBT speaker.
With IN/OUT stereo connectors, it is possible to use only one subwoofer with Left and Right speakers. The Neutrik TRUE1 Power connection negates the need for a power switch while offering a solid locking connection.
Optional wheels,, ergonomic integrated carrying handles and tour-grade plywood cabinets allow an easy transport
FEATURES:
Bass-reflex design with high SPL and punch
380mm (15”) high excursion magnet woofer with 75mm (3”) voice coil
Frequency response from 40Hz to 140Hz
New amplifier engineered and manufactured by FBT, 700W RMS LF in Class D
Digital Signal processor with 8 presets, 2 equalization with 2 LPF Crossover settings, cardioid configuration
Control panel with Stereo XLR in/outs, Volume, EQ presets, 8 steps Delay from 0.25m to 3.5m, Phase Reversal
Switch 0°-180°, 3 status LED indicators
15 mm (0.59”) birch plywood scratch resistant enclosure with internal bracing
M20 (20mm) top mount speaker stand socket and two aluminum ergonomic FBT handles
SPECIFICATIONS
CODE: 41222
CONFIGURATION: 1 way
BUILT-IN AMPLIFIER LF/HF: 700 W RMS
BUILT-IN AMPLIFIER PEAK LF/HF: 1400 W
FREQUENCY RESPONSE: 38Hz - 140Hz -6dB
LOW FREQUENCY WOOFER: 15 inch
MAXIMUM SPL CONT/PEAK: 132/135 Half-space dB
DISPERSION: omnidirectional HxV
INPUT IMPEDANCE: 22 Kohm
CROSSOVER FREQUENCY: 90 or 140Hz KHz
AC POWER REQUIREMENTS: 640 VA
INPUT CONNECTOR: stereo XLR with loop, HP out
POWER CORD: 6/19.7 m/ft
NET DIMENSION (WXHXD): 500x517x570 / 19.7x20.3x22.4 mm/inch
NET WEIGHT: 28/61.7 kg/lb
TRANSPORT DIMENSION (WXHXD): 600x617x670 / 23.6x24.3x26.4 mm/inch
TRANSPORT WEIGHT: 32/70.5 Kg/lb
Image 1 of 3
Image 2 of 3
Image 3 of 3