Martin Audio SX118 18 Inch Passive Direct Radiating Subwoofer Loudspeaker

$3,000.00

Martin Audio SX118 18" Inches Passive Direct Radiating Subwoofer Loudspeaker

The SX118 is a compact, high performance subwoofer that extends the low frequency operating range of the system to 47Hz and provides exceptional low frequency output for such a compact enclosure.

SX118 features a long-excursion 18” (460mm)/4” (100 mm) voice coil driver with a water-resistant cone and triple roll surround in a compact reflex enclosure.

The design of the 18” driver maximizes output while minimizing power compression and distortion, and the four reflex ports have a large frontal area to reduce turbulent air noise at very high levels. The enclosure is constructed from multi-laminate birch ply, finished with a durable polyurea coating and equipped with a Zintec grille, twin grab handles, skids, flying inserts for installation and a threaded pole socket for pole-mounting point source loudspeakers or up to 4 WPM enclosures as a simple plug-and-play system.

The product is supplied as standard without cabinet wheels, but they are available as an accessory.

By adding the input board cover accessory, SX118 is fully weather resistant and suitable for permanent outdoor usage.

Features:

  • Compact, direct radiating subwoofer

  • 18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet, waterproof cone

  • High output capability

  • Tour-grade plywood enclosure with flying inserts

Specification:

TYPE: Compact, direct radiating subwoofer

FREQUENCY RESPONSE (1): 47Hz – 150Hz ±3dB,

-10dB @ 41Hz

DRIVER: 18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet, waterproof cone

RATED POWER (2): 1000W AES, 4000W peak

SENSITIVITY (10): 102dB

MAXIMUM SPL (9): 138dB peak

NOMINAL IMPEDANCE:

DISPERSION (-6DB): Omnidirectional/or Cardioid (paired)

ENCLOSURE: Multi-laminate birch/poplar ply

FINISH: Durable Polyurea Coating

PROTECTIVE GRILLE: Black perforated Zintec

CONNECTORS: 2 x NL4 type

PIN CONNECTIONS (INPUT): LF: +1, -1 Link through: +2, -2

PINS CONNECTIONS (LINK): LF: +1, -1 Link through: +2, -2

FITTINGS: Two skids on base, with mating channels on top

M20 top-mounted thread plate for pole mounting

16 x M10 mounting points

2 x bar handles, 1 on each side

4 x fittings for optional transit cover

16 x M8 inserts for optional castors

DIMENSIONS (INCL SKIDS): (W) 600mm x (H) 509mm x (D) 632mm

(760mm including castors)

(W) 24in x (H) 20.36in x (D) 25.26in

(30.38in including castors)

WEIGHT: 43.5kg (96lbs) w/o castors 47kg (104lbs) with castors

Applications:

Touring sound reinforcement for small and medium-size venues

Fixed installations in concert halls, theatres, ballrooms and HoW

Sports stadium, arena installations & corporate AV events

Outdoor restaurant, bar and hotel entertainment areas

Concourses and Theme Parks

Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998.  We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.   

Shipping --Pro packed & shipped  USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed &  shipped. Processing times vary, 2-30  days

Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new. 

What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items,  electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids

Martin Audio SX118 18" Inches Passive Direct Radiating Subwoofer Loudspeaker

The SX118 is a compact, high performance subwoofer that extends the low frequency operating range of the system to 47Hz and provides exceptional low frequency output for such a compact enclosure.

SX118 features a long-excursion 18” (460mm)/4” (100 mm) voice coil driver with a water-resistant cone and triple roll surround in a compact reflex enclosure.

The design of the 18” driver maximizes output while minimizing power compression and distortion, and the four reflex ports have a large frontal area to reduce turbulent air noise at very high levels. The enclosure is constructed from multi-laminate birch ply, finished with a durable polyurea coating and equipped with a Zintec grille, twin grab handles, skids, flying inserts for installation and a threaded pole socket for pole-mounting point source loudspeakers or up to 4 WPM enclosures as a simple plug-and-play system.

The product is supplied as standard without cabinet wheels, but they are available as an accessory.

By adding the input board cover accessory, SX118 is fully weather resistant and suitable for permanent outdoor usage.

Features:

  • Compact, direct radiating subwoofer

  • 18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet, waterproof cone

  • High output capability

  • Tour-grade plywood enclosure with flying inserts

Specification:

TYPE: Compact, direct radiating subwoofer

FREQUENCY RESPONSE (1): 47Hz – 150Hz ±3dB,

-10dB @ 41Hz

DRIVER: 18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet, waterproof cone

RATED POWER (2): 1000W AES, 4000W peak

SENSITIVITY (10): 102dB

MAXIMUM SPL (9): 138dB peak

NOMINAL IMPEDANCE:

DISPERSION (-6DB): Omnidirectional/or Cardioid (paired)

ENCLOSURE: Multi-laminate birch/poplar ply

FINISH: Durable Polyurea Coating

PROTECTIVE GRILLE: Black perforated Zintec

CONNECTORS: 2 x NL4 type

PIN CONNECTIONS (INPUT): LF: +1, -1 Link through: +2, -2

PINS CONNECTIONS (LINK): LF: +1, -1 Link through: +2, -2

FITTINGS: Two skids on base, with mating channels on top

M20 top-mounted thread plate for pole mounting

16 x M10 mounting points

2 x bar handles, 1 on each side

4 x fittings for optional transit cover

16 x M8 inserts for optional castors

DIMENSIONS (INCL SKIDS): (W) 600mm x (H) 509mm x (D) 632mm

(760mm including castors)

(W) 24in x (H) 20.36in x (D) 25.26in

(30.38in including castors)

WEIGHT: 43.5kg (96lbs) w/o castors 47kg (104lbs) with castors

Applications:

Touring sound reinforcement for small and medium-size venues

Fixed installations in concert halls, theatres, ballrooms and HoW

Sports stadium, arena installations & corporate AV events

Outdoor restaurant, bar and hotel entertainment areas

Concourses and Theme Parks

Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998.  We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications.   

Shipping --Pro packed & shipped  USPS, UPS or Freight Service. Contact us & pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed &  shipped. Processing times vary, 2-30  days

Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, & accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new. 

What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items,  electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids