ART USBMIX Three-Channel Compact USB Audio Mixer Interface
The USB Mix is a portable analog mixer and class-compliant digital audio interface.
Channel 1 features an XLR / 1/4 combo jack that can accept mic, line, or instrument signals. It also has switchable phantom power to work with condenser mics. Channels 2 and 3 are configured as a stereo pair with 1/4 line inputs.
You can switch between monitoring only the mixer inputs, or blend them with the audio playback from your recording software. There are stereo outputs for studio monitors, a headphone output with an independent volume control, and a USB 2.0 connection for your computer or mobile device.
Easy to set up and use, the USB Mix is a compact and convenient entry point into digital recording, and a convenient bus-powered solution for mobile tracking.
Features
USB powered, no external power supply needed when used with a computer
Balanced XLR or unbalanced 1/4-inch Instrument inputs with switchable impedance
Switchable low noise +48V phantom power
Balanced 1/4-inch TRS inputs for stereo or mono line-level sources
1/4-inch TRS output jacks work with balanced or unbalanced lines
Stereo 1/4-inch TRS headphone jack with independent level control for output monitoring
Independent controls for both sets of inputs, main output, and headphone monitor
Green/Red LED signal/clip indicator
Switchable assignment of USB playback to channels 2 and 3
USB 2.0 compliant USB cable, AC adapter, and Audacity recording software included
Specifications:
Inputs
XLR balanced / 1/4″ unbalanced “Combo” jack (Ch1 input)
1/4″ balanced or unbalanced (Ch2–Ch3 inputs)
Outputs
1/4″ TRS balanced (Main Mix outputs)
1/4″ TRS stereo (Monitor output)
Input Impedance
240k (Inst-HiZ), 20k Ω (Line) (Ch1, Ch2–Ch3 1/4″ inputs)
> 4k Ω (Ch1 XLR input)
Output Impedance
<1k Ω (balanced 1/4″), <500 Ω (unbalanced 1/4″)
100 Ω (Monitor output)
Maximum Input Level
+4 dBu (XLR input), +14 dBu (1/4″ input)
Maximum Output Level
+14 dBu (Main Mix Outputs), +13 dBu (Monitor output)
Frequency Response
20 Hz – 20 kHz (+0, -1 dB)
Total Harmonic Distortion
<0.01% @ 1 kHz
Equivalent Input Noise
-120 dBu typical (XLR balanced, max gain)
-100 dBu typical (1/4″)
Signal to Noise Ratio > 90 dB typical (Ref 0 dBu)
CMRR > 54 dB typical
Phantom Power
Switch selectable, +48 V DC, filtered, current limited
Connectivity
USB 2.0 compliant, Windows 7, Vista, XP, 2000, ME, 98SE
Mac OS 9.1 / OS X computers with native USB support, Linux
Resolution
16 Bit, 44.1 kHz or 48 kHz, USB selectable from computer
0.4 ms A/D latency @ 44.1 kHz
Enclosure
All steel black finish
Power Requirements
5.0V DC @ <500 mA (external)
USB bus powered @ 150 mA typical
Dimensions (HWD)
1.6″ x 4.0″ x 4.75″ (4.1 cm x 10.1 cm x 12.1 cm)
Weight
1.1 lbs / 0.5 kg
Note
0 dBu = 0.775Vrms
Weight includes power supply and USB cable
ART USBMIX Three-Channel Compact USB Audio Mixer Interface
The USB Mix is a portable analog mixer and class-compliant digital audio interface.
Channel 1 features an XLR / 1/4 combo jack that can accept mic, line, or instrument signals. It also has switchable phantom power to work with condenser mics. Channels 2 and 3 are configured as a stereo pair with 1/4 line inputs.
You can switch between monitoring only the mixer inputs, or blend them with the audio playback from your recording software. There are stereo outputs for studio monitors, a headphone output with an independent volume control, and a USB 2.0 connection for your computer or mobile device.
Easy to set up and use, the USB Mix is a compact and convenient entry point into digital recording, and a convenient bus-powered solution for mobile tracking.
Features
USB powered, no external power supply needed when used with a computer
Balanced XLR or unbalanced 1/4-inch Instrument inputs with switchable impedance
Switchable low noise +48V phantom power
Balanced 1/4-inch TRS inputs for stereo or mono line-level sources
1/4-inch TRS output jacks work with balanced or unbalanced lines
Stereo 1/4-inch TRS headphone jack with independent level control for output monitoring
Independent controls for both sets of inputs, main output, and headphone monitor
Green/Red LED signal/clip indicator
Switchable assignment of USB playback to channels 2 and 3
USB 2.0 compliant USB cable, AC adapter, and Audacity recording software included
Specifications:
Inputs
XLR balanced / 1/4″ unbalanced “Combo” jack (Ch1 input)
1/4″ balanced or unbalanced (Ch2–Ch3 inputs)
Outputs
1/4″ TRS balanced (Main Mix outputs)
1/4″ TRS stereo (Monitor output)
Input Impedance
240k (Inst-HiZ), 20k Ω (Line) (Ch1, Ch2–Ch3 1/4″ inputs)
> 4k Ω (Ch1 XLR input)
Output Impedance
<1k Ω (balanced 1/4″), <500 Ω (unbalanced 1/4″)
100 Ω (Monitor output)
Maximum Input Level
+4 dBu (XLR input), +14 dBu (1/4″ input)
Maximum Output Level
+14 dBu (Main Mix Outputs), +13 dBu (Monitor output)
Frequency Response
20 Hz – 20 kHz (+0, -1 dB)
Total Harmonic Distortion
<0.01% @ 1 kHz
Equivalent Input Noise
-120 dBu typical (XLR balanced, max gain)
-100 dBu typical (1/4″)
Signal to Noise Ratio > 90 dB typical (Ref 0 dBu)
CMRR > 54 dB typical
Phantom Power
Switch selectable, +48 V DC, filtered, current limited
Connectivity
USB 2.0 compliant, Windows 7, Vista, XP, 2000, ME, 98SE
Mac OS 9.1 / OS X computers with native USB support, Linux
Resolution
16 Bit, 44.1 kHz or 48 kHz, USB selectable from computer
0.4 ms A/D latency @ 44.1 kHz
Enclosure
All steel black finish
Power Requirements
5.0V DC @ <500 mA (external)
USB bus powered @ 150 mA typical
Dimensions (HWD)
1.6″ x 4.0″ x 4.75″ (4.1 cm x 10.1 cm x 12.1 cm)
Weight
1.1 lbs / 0.5 kg
Note
0 dBu = 0.775Vrms
Weight includes power supply and USB cable
Image 1 of 3
Image 2 of 3
Image 3 of 3