The 4060 Omni Mic is the very first miniature microphone developed by DPA from the best technology previously only used in hearing aids and measurement microphones. This microphone handles sound pressure levels up to 134 dB before clipping occurs. This mic is well suited for applications where the sound source is more remote or damped and you need to have a good balance signal versus noise.
Now available with CORE+ & MicroLock®.
CORE+ takes your miniature mic to the next level, neutralizing distortion across the entire dynamic range. MicroLock – A dependable, secure locking microphone connector with limitless flexibility and reassuring reliability.
Specifications
4060 Series Omni Miniature Lavalier Microphone (4060/ 4061/ 4062/ 4071)
4061 CORE+ Omni Lavalier Mic for Loud SPL
4060 CORE Omni Lavalier Mic for Normal SPL
4061 CORE Omni Lavalier Mic for Loud SPL
4062 CORE Omni Lavalier Mic for Extremely Loud SPL
4063 CORE Omni Lavalier Mic for Loud SPL & Low Voltage
4071 CORE Omni Lavalier Mic for Loud SPL with Presence Boost
4060 CORE+ Omni Lavalier Mic for Normal SPL
4071 CORE+ Omni Lavalier Mic for Loud SPL with Presence Boost
Directional patternOmnidirectional
Principle of operationPressure
Cartridge typePre-polarized condenser
Frequency response20 Hz - 20 kHz
Effective frequency range ±2 dBSoft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz. High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz
Sensitivity, nominal, ±3 dB at 1 kHz6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weightedTyp. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Equivalent noise level, ITU-R BS.468-4Typ. 38 dB (max. 40 dB)
Distortion, THD < 0.5%133 dB SPL RMS, 136 dB SPL peak
Distortion, THD < 1%136 dB SPL RMS, 139 dB SPL peak
Dynamic rangeTyp. 111 dB
Max. SPL, THD 10%144 dB SPL peak
Rated output impedance30 - 40 Ω
Cable drive capabilityUp to 300 m (984 ft) with DAD9001-BC XLR Adapter
Power supply (for full performance)For wireless systems Min. 5 V - max. 10 V through DPA adapter
With DAD6001-BC: P48 (Phantom Power). Will work from 12 V
Current consumptionTyp. 1.5 mA (microphone). 3.5 mA with DAD9001-BC XLR Adapter
ConnectorMicroLock, TA4F Mini-XLR, 3-pin LEMO, Mini-Jack
Weight7.5 g (0.26 oz) incl. Cable and MicroLock connector
Microphone diameter5.4 mm (0.21 in)
Microphone length12.7 mm (0.5 in)
Cable length1.8 m (5.9 ft)
PolarityPositively increasing sound pressure produces positive going voltage on MicroLock pin
Temperature range-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)Up to 90%
Sensitivity selection tolerance (at 1 kHz)±1.5 dB
ColorsBlack, Beige, Brown, White
Key features
Exceptional audio quality
Uniform, consistent sound between DPA mics
Extremely rugged and reliable
Diminutive size made for flexible and easy concealment
Large selection of clips, windscreens, grids and other accessories
Modular adapter system fits most professional wireless systems
The 4060 Omni Mic is the very first miniature microphone developed by DPA from the best technology previously only used in hearing aids and measurement microphones. This microphone handles sound pressure levels up to 134 dB before clipping occurs. This mic is well suited for applications where the sound source is more remote or damped and you need to have a good balance signal versus noise.
Now available with CORE+ & MicroLock®.
CORE+ takes your miniature mic to the next level, neutralizing distortion across the entire dynamic range. MicroLock – A dependable, secure locking microphone connector with limitless flexibility and reassuring reliability.
Specifications
4060 Series Omni Miniature Lavalier Microphone (4060/ 4061/ 4062/ 4071)
4061 CORE+ Omni Lavalier Mic for Loud SPL
4060 CORE Omni Lavalier Mic for Normal SPL
4061 CORE Omni Lavalier Mic for Loud SPL
4062 CORE Omni Lavalier Mic for Extremely Loud SPL
4063 CORE Omni Lavalier Mic for Loud SPL & Low Voltage
4071 CORE Omni Lavalier Mic for Loud SPL with Presence Boost
4060 CORE+ Omni Lavalier Mic for Normal SPL
4071 CORE+ Omni Lavalier Mic for Loud SPL with Presence Boost
Directional patternOmnidirectional
Principle of operationPressure
Cartridge typePre-polarized condenser
Frequency response20 Hz - 20 kHz
Effective frequency range ±2 dBSoft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz. High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz
Sensitivity, nominal, ±3 dB at 1 kHz6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weightedTyp. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Equivalent noise level, ITU-R BS.468-4Typ. 38 dB (max. 40 dB)
Distortion, THD < 0.5%133 dB SPL RMS, 136 dB SPL peak
Distortion, THD < 1%136 dB SPL RMS, 139 dB SPL peak
Dynamic rangeTyp. 111 dB
Max. SPL, THD 10%144 dB SPL peak
Rated output impedance30 - 40 Ω
Cable drive capabilityUp to 300 m (984 ft) with DAD9001-BC XLR Adapter
Power supply (for full performance)For wireless systems Min. 5 V - max. 10 V through DPA adapter
With DAD6001-BC: P48 (Phantom Power). Will work from 12 V
Current consumptionTyp. 1.5 mA (microphone). 3.5 mA with DAD9001-BC XLR Adapter
ConnectorMicroLock, TA4F Mini-XLR, 3-pin LEMO, Mini-Jack
Weight7.5 g (0.26 oz) incl. Cable and MicroLock connector
Microphone diameter5.4 mm (0.21 in)
Microphone length12.7 mm (0.5 in)
Cable length1.8 m (5.9 ft)
PolarityPositively increasing sound pressure produces positive going voltage on MicroLock pin
Temperature range-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)Up to 90%
Sensitivity selection tolerance (at 1 kHz)±1.5 dB
ColorsBlack, Beige, Brown, White
Key features
Exceptional audio quality
Uniform, consistent sound between DPA mics
Extremely rugged and reliable
Diminutive size made for flexible and easy concealment
Large selection of clips, windscreens, grids and other accessories
Modular adapter system fits most professional wireless systems
(585) 405-4375
contact@echotonemusic.net
Image 1 of 1