TASCAM SERIES 208i – 20-In / 8-Out USB Audio/MIDI Interface
The TASCAM SERIES 208i is a professional 20-input, 8-output USB audio/MIDI interface designed for studio, home, and live recording. With a modern angled tabletop design, large control knobs, and an advanced internal architecture, it delivers top-tier sound quality, powerful DSP processing, and flexible expandability. TASCAM’s decades of audio engineering ensure transparent, natural tone with ultra-low noise performance.
Supreme audio fidelity is achieved through Ultra-HDDA mic preamp technology, providing exceptionally clean gain with minimal distortion. High-resolution 24-bit/192 kHz support and optimized Windows driver performance ensure ultra-low round-trip latency. Expandability is built in—dual S/MUX optical inputs allow additional mic preamps and external devices to seamlessly grow your studio setup.
The included TASCAM Control Software offers matrix mixing, DSP control, input/output routing, and full access to onboard effects including reverb, compression, EQ, and phase options. With bundled software (Cubase LE, Cubasis LE, AmpliTube, Neutron Elements, and T-RackS), users can produce, mix, and master complete projects from start to finish.
SPECS
Sampling Frequency: 44.1k / 48k / 88.2k / 96k / 176.4k / 192k Hz
Mic Amp EIN: −129 dBu or lower
Signal-to-Noise Ratio: 109 dB (MIC/LINE IN, gain min., A-Weighted)
Crosstalk: 100 dB or higher (MIC/LINE IN to LINE OUT, 1 kHz)
Power: DC 12V (AC Adapter PS-P1220E included)
Power Consumption: 14 W
Dimensions (W × H × D): 296 × 65 × 160 mm
Weight: 1.6 kg
Features at a Glance
Four transparent, ultra-low-noise Ultra-HDDA mic preamplifiers
Two optical S/MUX expansion ports supporting up to 16 additional input channels (20 total inputs)
Eight 1/4-inch analog line outputs for flexible monitoring or up to 7.1 surround setups
Built-in DSP effects: reverb, compressor, 4-band EQ, and phase invert
Powerful 8-bus DSP mixer with TASCAM Control software
Flexible routing for analog, optical, and USB inputs to any output
Up to four aux buses for multiple monitor speaker pairs
High-resolution 24-bit/192 kHz recording and playback
Includes Steinberg Cubase LE/Cubasis LE, IK AmpliTube, iZotope Neutron Elements, and T-RackS software
Integrated MIDI interface and word clock I/O
Direct monitoring for low-latency tracking
TASCAM SERIES 208i – 20-In / 8-Out USB Audio/MIDI Interface
The TASCAM SERIES 208i is a professional 20-input, 8-output USB audio/MIDI interface designed for studio, home, and live recording. With a modern angled tabletop design, large control knobs, and an advanced internal architecture, it delivers top-tier sound quality, powerful DSP processing, and flexible expandability. TASCAM’s decades of audio engineering ensure transparent, natural tone with ultra-low noise performance.
Supreme audio fidelity is achieved through Ultra-HDDA mic preamp technology, providing exceptionally clean gain with minimal distortion. High-resolution 24-bit/192 kHz support and optimized Windows driver performance ensure ultra-low round-trip latency. Expandability is built in—dual S/MUX optical inputs allow additional mic preamps and external devices to seamlessly grow your studio setup.
The included TASCAM Control Software offers matrix mixing, DSP control, input/output routing, and full access to onboard effects including reverb, compression, EQ, and phase options. With bundled software (Cubase LE, Cubasis LE, AmpliTube, Neutron Elements, and T-RackS), users can produce, mix, and master complete projects from start to finish.
SPECS
Sampling Frequency: 44.1k / 48k / 88.2k / 96k / 176.4k / 192k Hz
Mic Amp EIN: −129 dBu or lower
Signal-to-Noise Ratio: 109 dB (MIC/LINE IN, gain min., A-Weighted)
Crosstalk: 100 dB or higher (MIC/LINE IN to LINE OUT, 1 kHz)
Power: DC 12V (AC Adapter PS-P1220E included)
Power Consumption: 14 W
Dimensions (W × H × D): 296 × 65 × 160 mm
Weight: 1.6 kg
Features at a Glance
Four transparent, ultra-low-noise Ultra-HDDA mic preamplifiers
Two optical S/MUX expansion ports supporting up to 16 additional input channels (20 total inputs)
Eight 1/4-inch analog line outputs for flexible monitoring or up to 7.1 surround setups
Built-in DSP effects: reverb, compressor, 4-band EQ, and phase invert
Powerful 8-bus DSP mixer with TASCAM Control software
Flexible routing for analog, optical, and USB inputs to any output
Up to four aux buses for multiple monitor speaker pairs
High-resolution 24-bit/192 kHz recording and playback
Includes Steinberg Cubase LE/Cubasis LE, IK AmpliTube, iZotope Neutron Elements, and T-RackS software
Integrated MIDI interface and word clock I/O
Direct monitoring for low-latency tracking
(585) 405-4375
contact@echotonemusic.net
Image 1 of 5
Image 2 of 5
Image 3 of 5
Image 4 of 5
Image 5 of 5